2009/09/09

Cheapest & Latest API Standard (PDF) (1)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


API BULL 5C2
Bulletin on Performance Properties of Casing, Tubing, and Drill Pipe- Twenty-First Edition

API BULL 5C3
Bulletin on Formulas and Calculations for Casing, Tubing, Drill Pipe, and Line Pipe Properties-Sixth Edition; Supplment 1 - April 1999

API BULL 6J
Bulletin on Testing of Oilfield Elastomers - A Tutorial

API BULL D10
Selecting Rotary Drilling Equipment, Procedure for

API PUBL 3802
Audit Control Cuide

API PUBL 3810
CODE - Crude Oil Data Exchange Implementation Guidelines

API PUBL 3820
Grade; Gas Revenue Accounting Data Exchange; Grade User Manual

API PUBL 3855
Conventions and Implementation Guidelines for EDI Wellsite Information Transfer Specification (WITS)-Version 1.1

API PUBL 3860
Petroleum Industry Data Exchange PIDX Implementation Guideline for EDI Electronic Data Interchange

API RP 13B- 1
Recommended Practice Standard Procedure for Field Testing Water- Based Drilling Fluids-Third Edition; ANSI/API 13B-1/ISO 10414-1

API RP 13B- 2
Recommended Practice for Field Testing Oil-Based Drilling Fluids-Fourth Edition

API RP 13D
Recommended Practice on the Rheology and Hydraulics of Oil-Well Drilling Fluids-Fourth Edition

API RP 13E
Recommended Practice for Shale Shaker Screen Cloth Designation- Replaced by API RP 13C

API RP 13K
Recommended Practice for Chemical Analysis of Barite-Second Edition; Errata 4/25/1998

API RP 16E
Recommended Practice for Design of Control Systems for Drilling Well Control Equipment

API RP 16Q
Recommended Practice for Design, Selection, Operation and Maintenance of Marine Drilling Riser Systems-First Edition; Formerly RP 2Q and RP 2K

API RP 53
Blowout Prevention Equipment Systems for Drilling Wells-Third Edition

API RP 54
Recommended Practice for Occupational Safety for Oil and Gas Well Drilling and Servicing Operations-Third Edition

API RP 5A3
Recommended Practice on Thread Compounds for Casing, Tubing, and Line Pipe-Second Edition/ISO 13678 Adoption

API RP 5C1
Recommended Practice for Care and Use of Casing and Tubing- Eighteenth Edition

API RP 5L1
Recommended Practice for Railroad Transportation of Line Pipe-Sixth Edition

API RP 5LW
Recommended Practice for Transportation of Line Pipe on Barges and Marine Vessels-Second Edition

API RP 64
Recommended Practices for Diverter Systems Equipment and Operations-Second Edition

API RP 7G
Recommended Practice for Drill Stem Design and Operating Limits- Sixteenth Edition; Errata May 2000; Addendum 1: November 2003

API RP 8B
Recommended Practice for Procedures for Inspections, Maintenance, Repair, and Remanufacture of Hoisting Equipment-Seventh Edition/ ISO 13534 Adoption; Addendum: 11/2003; Addendum 2: 4/2005

API RP 9B
Recommended Practice on Application Care, and Use of Wire Rope for Oil Field Service-Twelfth Edition

API SPEC 13A
Specification for Drilling-Fluid Materials-16th Edition

API SPEC 14D
Specification for Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service

API SPEC 16A
Specification for Drill-Through Equipment-Third Edition; ISO 13533:2001/ISO 13533 Adoption; Errata: 11/2004

API SPEC 16C
Specification for Choke and Kill Systems

API SPEC 16D
Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment-Second Edition

API SPEC 5CT
Specification for Casing and Tubing-Eighth Edition; ISO 11960:2004 Adoption; Effective Date: January 1, 2006

API SPEC 5CT (METRIC)
Specification for Casing and Tubing (Metric Units)-Fifth Edition; Superseded by Spec 5CT-2001

API SPEC 5D
Specification for Drill Pipe-Fifth Edition

API SPEC 5L
Specification for Line Pipe-Forty-Third Edition; Errata: 12/20/2004

API SPEC 6A
Specification for Wellhead and Christmas Tree Equipment-Nineteenth Edition; ISO 10423 Adoption; Errata 1: 9/01/2004; Errata 2: 04/25/2005

API SPEC 8A
Specification for Drilling and Production Hoisting Equipment-Thirteenth Edition; Addendum 1 May 2001

API SPEC 8C
Specification for Drilling and Production Hoisting Equipment (PSL 1 and PSL 2)-Fourth Edition; ISO 13535:2000/ ISO 13535 Adoption; Addendum 1: 11/1/2004; Addendum 2: 04/15/2005;

API SPEC 9A
Specification for Wire Rope-Twenty-fifth Edition; ANSI/API SPEC 9A/ISO 10425:2003/ISO 10425 Adoption

API STD 2220
Contractor Safety Performance Process-Second Edition

API TR 6AF
Technical Report on Capabilities of API Flanges under Combinations of Load-Second Edition

API TR 6AF1
Technical Report on Temperature Derating on API Flanges under Combination of Loading-Second Edition

API TR 6AF2
Technical Report on Capabilities of API Integral Flanges under Combination of Loading - Phase II-Second Edition

API TR 6F1
Technical Report on Performance of API and ANSI End Connections in a Fire Test According to API Specification 6FA-Third Edition

API WORLDWIDE CEMENTING
Worldwide Cementing Practices First Edition
API H00005
Manual of Petroleum Measurement Standards - Draft Standard - Sediment and Water - Continuous On-Line Measurement of Water Content in Petroleum and Petroleum Products-First Edition

API H00008
Measurement of Liquid Hydrocarbons by Ultrasonic Flowmeters Using Transit Time Technology-First Edition

API MPMS 1
Manual of Petroleum Measurement Standards Chapter 1 - Vocabulary

API MPMS 10.1
Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water, Section 1 - Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method-Second Edition

API MPMS 10.2
Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 2 - Determination of Water in Crude Oil by the Distillation Method

API MPMS 10.3
Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 3 - Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)-Second Edition

API MPMS 10.4
Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 4 - Determination of Water and/or Sediment in Crude Oil by the Centrifuge Method (Field Procedure)

API MPMS 10.7
Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 7 - Standard Test Method for Water in Crude Oils by Karl Fischer Titration- Second Edition

API MPMS 10.8
Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 8 - Standard Test Method for Sediment in Crude Oil by Membrane Filtration-Second Edition

API MPMS 10.9
Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 9 - Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration-Second Edition

API MPMS 11.1
Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils-VCF Software; Software Application - To Purchase the Software Application call 1-800-854-7179

API MPMS 11.2
Manual of Petroleum Measurement Standards Chapter 11.2.1 and 11.2.1M - Compressibility Factors for Hydrocarbons: 0-90 Degrees API Gravity and 638-1074 Kilograms per Cubic Metre Ranges Chapter 11.2.3 and 11.2.3M - Water Calibration of Provers Computer Tape

API MPMS 11.2.2
Manual of Petroleum Measurement Standards Chapter 11.2.2 - Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60 Degrees F/ 60 Degrees F) and -50 Degrees F to 140 Degrees F Metering Temperature-Second Edition; GPA 8286-86; Errata:June

API MPMS 11.2.2 ADDENDUM
Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Addendum to Section 2, Part 2 - Compressibility Factors for Hydrocarbons, Correlation of Vapor Pressure for Commercial Natural Gas Liquids-First Edition; Errata 1996

API MPMS 11.2.2M
Manual of Petroleum Measurement Standards Chapter 11.2.2M - Compressibility Factors for Hydrocarbons: 350-637 Kilograms per Cubic Metre Density (15 Degrees C) and -46 Degrees C to 60 Degrees C Metering Temperature

API MPMS 11.3.2.1
Manual of Petroleum Measurement Standards Chapter 11.3.2.1 - Ethylene Density Measurement Manual-Disk Available

API MPMS 11.3.3.2
Manual of Petroleum Measurement Standards Chapter 11.3.3.2 - Propylene Compressibility Tables-Disk Available

API MPMS 12.1.1
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 1 - Upright Cylindrical Tanks and Marine Vessels-Second Edition

API MPMS 12.1.2
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 2 - Calculation Procedures for Tank Cars-First Edition

API MPMS 12.2
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Liquid Petroleum Quantities Measured by Turbine or Displacement Meters-First Edition

API MPMS 12.2.1
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 1 - Introduction- Second Edition

API MPMS 12.2.2
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 2 - Measurement Tickets-Third Edition

API MPMS 12.2.3
Calculation of Petroleum Quantities - Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors - Part 3 - Proving Reports-First Edition

API MPMS 12.2.4
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 4 - Calculation of Base Prover Volumes by t

API MPMS 14.3.1
Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 1 - General Equations and Uncertainty Guidelines-Third Edition; Errata - 1991; Errata - 1993; Replaces API MPMS

API MPMS 14.3.3
Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 3 - Natural Gas Applications

API MPMS 14.4
Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 4 - Converting Mass of Natural Gas Liquids and Vapors to Equivalent Liquid Volumes-First Edition

API MPMS 14.5
Calculation of Gross Heating Value, Relative Density and Compressibility Factor for Natural Gas Mixtures from Compositional Analysis-GPA STD 2172- 96

API MPMS 14.8
Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 8 - Liquefied Petroleum Gas Measurement-Second Edition

API MPMS 17.1
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 1 - Guidelines for Marine Cargo Inspection-Fourth Edition; Errata: June 2005

API MPMS 18.1
Manual of Petroleum Measurement Standards Chapter 18 - Custody Transfer Section 1 - Measurement Procedures for Crude Oil Gathered From Small Tanks by Truck-Second Edition

API MPMS 19.1
Manual of Petroleum Measurement Standards Chapter 19 - Evaporative Loss Measurement Section 1 - Evaporative Loss from Fixed-Roof Tanks-Third Edition

API MPMS 19.1D
Documentation File for API Manual of Petroleum Measurement Standards Chapter 19.1 - Evaporative Loss from Fixed Roof Tanks-First Edition; Erratum - 1994; API Bulletin 2518

API MPMS 19.2
Manual of Petroleum Measurement Standards Chapter 19 - Evaporative Loss Measurement Section 2 - Evaporative Loss from Floating-Roof Tanks- Second Edition; Formerly, API Publications 2517 and 2519

API MPMS 19.3 PART A
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part A - Wind Tunnel Test Method for the Measurement of Deck-Fitting Loss Factors for External Floating-Roof Tanks-First Edition

API MPMS 19.3 PART B
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part B - Air Concentration Test Method - Rim-Seal Loss Factors for Floating-Roof Tanks-First Edition

API MPMS 19.3 PART C
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part C - Weight Loss Test Method for the Measurement of Rim-Seal Loss Factors for Internal Floating-Roof Tanks-First Edition

API MPMS 19.3 PART D
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part D - Fugitive Emission Test Method for the Measurement of Deck- Seam Loss Factors for Internal Floating-Roof Tanks-First Edition

API MPMS 19.3 PART E
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part E - Weight Loss Test Method for the Measurement of Deck-Fitting Loss Factors for Internal Floating-Roof Tanks-First Edition

API MPMS 19.3 PART F
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part F - Evaporative Loss Factor for Storage Tanks Certification Program- First Edition

API MPMS 19.3 PART G
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part G - Certified Loss Factor Testing Laboratory Registration-First Edition

API MPMS 19.3 PART H
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part H - Tank Seals and Fittings Certification - Administration-First Edition

API MPMS 19.4
Manual of Petroleum Measurement Standards Chapter 19.4 - Recommended Practice for Speciation of Evaporative Losses-Second Edition

API MPMS 2.2A
Manual of Petroleum Measurement Standard Chapter 2 - Tank Calibration Section 2A - Measurement and Calibration of Upright Cylindrical Tanks by the Manual Tank Strapping Method-First Edition

API MPMS 2.2B
Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2B - Calibration of Upright Cylindrical Tanks Using the Optical Reference Line Method-First Edition

API MPMS 2.2C
Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2C - Calibration of Upright Cylindrical Tanks Using the Optical- Triangulation Method-First Edition/ ISO 7507-3 Adoption

API MPMS 2.2D
Manual of Petroleum Measurement Standards Chapter 2 Tank Calibration Section 2D Calibration of Upright Cylindrical Tanks Using the Internal Electrooptical Distance Ranging Method-First Edition/ISO 7507-4 Adoption

API MPMS 2.2E
Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 1: Manual Methods-First Edition; ISO 12917-1 Adoption

API MPMS 2.2F
Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 2: Internal Electro-Optical Distance-Ranging Method-First Edition; ISO 12917-2 Adoption

API MPMS 20.1
Manual of Petroleum Measurement Standards Chapter 20 - Allocation Measurement Section 1 - Allocation Measurement

API MPMS 21.1
Manual of Petroleum Measurement Standards Chapter 21 - Flow Measurement Using Electronic Metering Systems Section 1 - Electronic Gas Measurement

API MPMS 22.2
Manual of Petroleum Measurement Standards Chapter 22Testing Protocol Section 2Differential Pressure Flow Measurement Devices-First Edition; Replaces MPMS 5.7:2003

API MPMS 3.1A
Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1A - Standard Practice for the Manual Gauging of Petroleum and Petroleum Products-Second Edition

API MPMS 3.1B
Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1B - Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging-Second Edition

API MPMS 4.1
Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 1 - Introduction-Third Edition

API MPMS 4.2
Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 2 - Displacement Provers-Third Edition

API MPMS 4.5
Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 5 - Master-Meter Provers-Second Edition; Supersedes 1101, 2531, 2533, 2534

API MPMS 4.6
Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 6 - Pulse Interpolation-Second Edition

API MPMS 4.7
Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 7 - Field - Standard Test Measures-Second Edition

API MPMS 4.8
Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 8 - Operation of Proving Systems

API MPMS 4.9.1
Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and 1Introduction to the Determination of the Volume of Displacement and Tank Provers-First Edition

API MPMS 4.9.2
Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and Volumetric Tank Provers Part 2Determination of the Volume of Displacement and Tank Provers by the Waterdraw Method of Calibration-First

API MPMS 5.1
Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 1 - General Considerations for Measurement by Meters-Fourth Edition

API MPMS 5.3
Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 3 - Measurement of Liquid Hydrocarbons by Turbine Meters-Fifth Edition

API MPMS 5.4
Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 4 - Accessory Equipment for Liquid Meters-Fourth Edition

API MPMS 5.5
Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 5 - Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems- Second Edition

API MPMS 5.8
Manual of Petroluem Measurement Standards Chapter 5 - Metering - Section 8 - Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology-First Edition

API MPMS 6.1
Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 1 - Lease Automatic Custody Transfer (LACT) Systems-Second Edition

API MPMS 6.5
Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 5 - Metering Systems for Loading and Unloading Marine Bulk Carriers- Second Edition

API MPMS 6.7
Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 7 - Metering Viscous Hydrocarbons-Second Edition

API MPMS 8.2
Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 2 - Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products-Second Edition; ASTM D4177

API MPMS 8.3
Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 3 - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products-First Edition; ASTM D5854

API MPMS 8.4
Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 4 - Standard Practice for Sampling and Handling of Fuels for Volatility Measurement- Second Edition

API MPMS 9.1
Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 1 - Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method-Second Edit

API MPMS 9.3
Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 3 - Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method-Second Edition

API PUBL 2558
Wind Tunnel Testing of External Floating-Roof Storage Tanks

API PUBL 4698
A Review of Technologies to Measure the Oil and Grease Content of Produced Water from Offshore Oil and Gas Production Operations

API RP 2556
Correcting Gauge Tables for Incrustation

API RP 2SM
Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring-First Edition

API STD 2555
Method for Liquid Calibration of Tanks-ASTM D1406-65
API CUMULATIVE IMPACT
Cumulative Impact of Environmental Regulations on the U.S. Petroleum Refining, Transportation and Marketing Industries

API DR 145
Identification of Oils that Produce Non-Buoyant in Situ Burning Residues and Methods for Their Recovery

API DR 148
Identification of Organic Toxicants in Treated Refinery Effluents

API DR 225
Remediation of a Fractured Clay Till Using Air Flushing: Field Experiments at Sarnia, Ontario

API DR 342
Toxicity Bioassays on Dispersed Oil in the North Sea: June 1996 Field Trials

API DR 351
Proceedings: Workshop to Identify Promising Technologies for the Treatment of Produced Water Toxicity

API DR 53
Characterization of Exploration and Production Associated Waste

API FORM 5U01
Model Form of Voluntary Unit Agreement-Fourth Edition

API FORM 5U02
Model Form of Voluntary Unit Operating Agreement-Fourth Edition

API FORM 5U04
Model Form of Statutory Unit Operating Agreement-Second Edition

API INTERPRETATIONS 1988
1988 Interpretations - Technical Publications Answers to Technical Inquiries

API INTERPRETATIONS 1989
1989 and 1990 Interpretations - Technical Publications Answers to Technical Inquiries

API INTERPRETATIONS 1991
1991 Interpretations - Technical Publications Answers to Technical Inquiries

API INTERPRETATIONS 1992
1992 Interpretations - Technical Publications Answers to Technical Inquiries

API INTERPRETATIONS 1993
1993 Interpretations - Technical Publications Answers to Technical Inquiries

API INTERPRETATIONS 1995
1994 and 1995 Interpretations - Technical Publications Answers to Technical Inquiries

API MF 5U03
Model Form of Statutory Unit Agreement-Second Edition

API PUB 352
Management of Residual Materials: 1997 Petroleum Refining Performance

API PUBL 2021A
Interim Study - Prevention and Suppression of Fires in Large Aboveground Atmospheric Storage Tanks-First Edition

API PUBL 2207
Preparing Tank Bottoms for Hot Work-Fifth Edition; Errata June 1999

API PUBL 2218
Fireproofing Practices in Petroleum and Petrochemical Processing Plants-Second Edition

API PUBL 2230
Static Electricity Research Project

API PUBL 2351
Inproving Human Performance Systems in the Petroleum Industry; Phase I Report: Data Collection and Feasibility Assessment

API PUBL 2524
Impact Assessment of New Data on the Validity of American Petroleum Institute Marine Transfer Operation Emission Factors

API PUBL 300
Generation and Management of Wastes and Secondary Materials in the Petroleum Refining Industry: 1987-1988

API PUBL 301
Aboveground Storage Tank Survey

API PUBL 302
Waste Minimization in the Petroleum Industry Source Reduction Recycle Treatment Disposal a Compendium of Practices

API PUBL 303
Generation and Management of Wastes and Secondary Materials

API PUBL 304
Evaluation of Restoration Alternatives for Natural Resources Injured by Oil Spills

API PUBL 305
Protecting Agricultural Crops from Ozone Exposures Key Issues and Future Research Directions

API PUBL 306
An Engineering Assessment of Volumetric Methods of Leak Detection in Aboveground Storage Tanks

API PUBL 307
Engineering Assessment of Acoustic Methods of Leak Detection in Aboveground Storage Tanks

API PUBL 309
Current Status and Research Needs Related to Biogenic Hydrocarbons

API PUBL 310
Analysis of Refinery Screening Data

API PUBL 311
Environmental Design Considerations for Petroleum Refining Crude Processing Units

API PUBL 31101
Environmental Design Considerations for Petroleum Refining Crude Processing Units

API PUBL 312
Responding to Environmental Challenge A Discussion Among People from Industry, Government and Environmental Groups

API PUBL 315
Assessment of Tankfield Dike Lining Materials and Methods

API PUBL 316
Identifying and Measuring Nonuse Values for Natural and Environmental Resources a Critical Review of the State of the Art

API PUBL 317
Industry Experience with Pollution Prevention Programs

API PUBL 322
Engineering Evaluation of Acoustic Methods of Leak Detection in Aboveground Storage Tanks

API PUBL 323
Engineering Evaluation of Volumetric Methods of Leak Detection in Aboveground Storage Tanks

API PUBL 324
Generation and Management of Residual Materials Petroleum Refining Performance 1990 Survey

API PUBL 325
Evaluation of a Methodology for the Detection of Leaks in Aboveground Storage Tanks

API PUBL 326
Cost Effectiveness of VOC and NOx Emission Control Measures

API PUBL 327
Aboveground Storage Tank Standards: A Tutorial

API PUBL 328
Laboratory Evaluation of Candidate Liners for Secondary Containment of Petroleum Products

API PUBL 329
Generation and Management of Residual Materials Petroleum Refining Performance 1991 Survey

API PUBL 330
Survey of API Members Aboveground Storage Tank Facilities; Health and Environmental Affairs

API PUBL 331
Environmental Performance Indicators: Methods for Measuring Pollution Prevention

API PUBL 332
Comparison of Screening Values from Selected Hydrocarbon Screening Instruments

API PUBL 333
Generation and Management of Residual Materials

API PUBL 334
Guide to Leak Detection for Aboveground Storage Tanks

API PUBL 336
Management of Residual Materials: 1994 Petroleum Refining Performance

API PUBL 337
Development of Emission Factors for Leaks in Refinery Components in Heavy Liquid Service

API PUBL 339
Management of Residual Materials: 1995 Petroleum Refining Performance

API PUBL 340
Liquid Release Prevention and Detection Measures for Aboveground Storage Facilities

API PUBL 341
Survey of Diked-Area Liner Use at Aboveground Storage Tank Facilities

API PUBL 342
Fugitive Emissions from Equipment Leaks 1: Monitoring Manual

API PUBL 343
Fugitive Emissions from Equipment Leaks II: Calculation Procedures for Petroleum Industry Facilities

API PUBL 345
Management of Residual Materials: 1996 - Petroleum Refining Performance

API PUBL 346
Results of Range-Finding Testing of Leak Detection and Leak Location Technologies for Underground Pipelines

API PUBL 347
Hazardous Air Pollutant Emissions from Gasoline Loading Operations at Bulk Gasoline Terminals

API PUBL 348
Air Toxics Emission Factors for Combustion Sources Using Petroleum- Based Fuels - Volume 1 Development of Emission Factors Using API/WSPA Approach

API PUBL 349
Air Toxics Emission Factors for Combustion Sources Using Petroleum- Based Fuels - Graphical-User-Interface Database and User?′s Manual Version 2.0.1

API PUBL 351
Overview of Soil Permeability Test Methods

API PUBL 4452
1987 Oil Spill Conference

API PUBL 4465
Evaluation of Treatment Technologies for Listed Petroleum Refinery Wastes

API PUBL 4479
Proceedings 1989 Oil Spill Conference Prevention, Behavior, Control, Cleanup

API PUBL 4525
Compilation of Field- Collected Cost and Treatment Effectiveness Data for the Removal of Dissolved Gasoline Components from Groundwater

API PUBL 4527
Evaluation of Limiting Constituents Suggested for Land Disposal of Exploration and Production Wastes

API PUBL 4529
Oil Spill Conference Prevention, Behavior, Control, Cleanup

API PUBL 4531
Chemical Fate and Impact of Oxygenates in Groundwater: Solubility of BTEX from Gasoline-Oxygenate Mixtures

API PUBL 4546
Hazard Response Modeling Uncertainty (A Quantitative Method) Volume II Evaluation of Commonly Used Hazardous Gas Dispersion Models

API PUBL 4558
Options for Minimizing Environmental Impacts of Freshwater Spill Response

API PUBL 45592
Results of Toxicological Studies

API PUBL 4580
1993 Oil Spill Conference

API PUBL 4587
Remote Sensing Feasibility Study of Refinery Fenceline Emissions

API PUBL 4588
Development of Fugitive Emission Factors and Emission Profiles for Petroleum Marketing Terminals Volume I: Text

API PUBL 4589
Fugitive Hydrocarbon Emissions from Oil and Gas Production Operations

API PUBL 4592
Odor Threshold Studies Performed with Gasoline and Gasoline Combined with MTBE, ETBE and TAME

API PUBL 4593
Transport and Fate of Non-BTEX Petroleum Chemicals in Soils and Groundwater

API PUBL 4594
Critical Review of Toxicity Values and an Evaluation of the Persistence of Petroleum Products for Use in Natural Resource Damage Assessments

API PUBL 4599
Interlaboratory Study of Three Methods for Analyzing Petroleum Hydrocarbons in Soils

API PUBL 4600
Metals Criteria for Land Management of Exploration and Production Wastes: Technical Support Document for API Recommended Guidance Values

API PUBL 4601
Transport and Fate of Dissolved Methanol, Methyl-Tertiary-Butyl- Ether, and Monoaromatic Hydrocarbons in a Shallow Sand Aquifer Appendix H: Laboratory Biotransformation Studies

API PUBL 4602
Minimization, Handling, Treatment, and Disposal of Petroleum Products Terminal Wastewaters; Errata - 1994

API PUBL 4603
Investigation of MOBILE5a Emission Factors: Assessment of Exhaust and Nonexhaust Emission Factor Methodologies and Oxygenate Effects

API PUBL 4604
Investigation of MOBILE5a Emission Factors: Evaluation of I/M and LEV Program Benefits

API PUBL 4605
Investigation of MOBILE5a Emission Factors: Evaluation of IM240-to- FTP Correlation and Base Emission Rate Equations

API PUBL 4606
Source Control and Treatment of Contaminants Found in Petroleum Product Terminal Tank Bottoms

API PUBL 4607
User?′s Guide and Technical Resource Document: Evaluation of Sediment Toxicity Tests for Biomonitoring Programs

API PUBL 4608
Evaluation of Sediment Toxicity Tests for Biomonitoring Programs

API PUBL 4609
In Situ Air Sparging: Evaluation of Petroleum Industry Sites and Considerations for Applicability, Design and Operation

API PUBL 4610
Critical Review of Draft EPA Guidance on Assessment and Control of Bioconcentratable Contaminants in Surface Waters

API PUBL 4611
Interlaboratory Study of EPA Methods 1662, 1654A, and 1663 for the Determination of Diesel, Mineral and Crude Oils in Drilling Muds from Offshore Oil and Gas Industry Discharges

API PUBL 4612
Study of Refinery Fugitive Emissions from Equipment Leaks

API PUBL 4613
Study of Refinery Fugitive Emissions from Equipment Leaks Appendices

API PUBL 4615
Emission Factors for Oil and Gas Production Operations

API PUBL 4616
Importance of Using Alternative Base Cases in Photochemical Modeling

API PUBL 4617
Monte Carlo Approach to Generating Equivalent Ventilation Rates in Population Exposure Assessments

API PUBL 4618
Characteristics and Performance of Supercritical Fluid Extraction (SFE) in the Analysis of Petroleum Hydrocarbons in Soils and Sludges

API PUBL 4619
Study to Characterize Air Concentrations of Methyl Tertiary Butyl Ether (MTBE) at Service Stations in the Northeast

API PUBL 4620
International Oil Spill Conference Proceedings Achieving and Maintaining Preparedness

API PUBL 4621
A: IMPLEMENTING AN EFFECTIVE RESPONSE MANAGEMENT SYSTEM - B: THE USE AND MISUSE OF SCIENCE IN NATURAL RESOURCE DAMAGE ASSESSMENT - C: PERSPECTIVES ON ESTABLISHING AND MAINTAINING OIL POLLUTION RESPONSE CAPABILITIES-INCLUDES API 4621A, B & C

API PUBL 4622
Petroleum Industry Data Characterizing Occupational Exposures to Methyl Tertiary Butyl Ether (MTBE) 1983-1993

API PUBL 4623
Anecdotal Health-Related Complaint Data Pertaining to Possible Exposures to Methyl Tertiary Butyl Ether (MTBE): 1993 and 1994 Follow-Up Surveys (1984- 1994)

API PUBL 4625
Service Station Personnel Exposures to Oxygenated Fuel Components - 1994

API PUBL 4627
In Situ and On-Site Biodegradation of Refined and Fuel Oils: A Review of Technical Literature 1988 - 1991

API PUBL 4628
Guidance Manual for Modeling Hypothetical Accidental Releases to the Atmosphere

API PUBL 4631
Petroleum Contaminated Low Permeability Soil: Hydrocarbon Distribution Processes, Exposure Pathways and In Situ Remediation Technologies

API PUBL 4632
Reducing Uncertainty in Laboratory Sediment Toxicity Tests

API PUBL 4633
Barium in Produced Water: Fate and Effects in the Marine Environment

API PUBL 4634
Index and Abstracts of API Health-Related Research 13th Edition 1959-1994

API PUBL 4635
Compilation of Field Analytical Methods for Assessing Petroleum Product Releases

API PUBL 4636
HGSYSTEM 3.0: Technical Reference Manual and User?′s Guide

API PUBL 4637
Analysis of Causes of Failure in High Emitting Cars

API PUBL 4638
Calculation Workbook for Oil and Gas Production Equipment Fugitive Emissions

API PUBL 4639
Estimation of Fugitive Emissions from Petroleum Refinery Process Drains Phase I Report

API PUBL 4640
Petroleum in the Freshwater Environment an Annotated Bibliography 1946 - 1993

API PUBL 4641
Summary of Produced Water Toxicity Identification Evaluation Research

API PUBL 4642
A Study to Quantify On-Road Emissions of Dioxins and Furans from Mobile Sources: Phase 2

API PUBL 4643
Estimation of Infiltration and Recharge for Environmental Site Assessment

API PUBL 4644
Methodology for Estimating Incremental Benzene Exposures and Risks Associated with Glycol Dehydrators

API PUBL 4645
Methane and Carbon Dioxide Emission Estimates from U.S. Petroleum Sources

API PUBL 4646
Evaluation of Fuel Tank Flammability of Low RVP Gasolines

API PUBL 4647
Brain Glial Fibrillary Acidic Protein (GFAP) as a Marker of Neurotoxicity During Inhalation Exposure to Toluene

API PUBL 4648
Human Neurobehavioral Study Methods: Effects of Subject Variables on Research Results

API PUBL 4650
Analysis of High-Mileage-Vehicle Emissions Data from Late-Model, Fuel-Injected Vehicles

API PUBL 4651
International Oil Spill Conference Improving Environmental Protection - Progress, Challenges, Responsibilities-Proceedings

API PUBL 4653
Fugitive Emission Factors for Crude Oil and Product Pipeline Facilities

API PUBL 4654
Field Studies of BTEX and MTBE Intrinsic Bioremediation

API PUBL 4655
Field Evaluation of Biological and Non-Biological Treatment Technologies to Remove MTBE/Oxygenates from Petroleum Product Terminal Wastewaters

API PUBL 4656
Bioaccumulation: How Chemicals Move from the Water into Fish and Other Aquatic Organisms

API PUBL 4657
Effects of Sampling and Analytical Procedures on the Measurement of Geochemical Indicators of Intrinsic Bioremediation: Laboratory and Field Studies

API PUBL 4658
Methods for Measuring Indicators of Intrinsic Bioremediation: Guidance Manual

API PUBL 4659
Graphical Approach for Determining Site-Specific Dilution-Attenuation Factors (DAFs)-Technical Background Document and User?′s Guide; Cover Page and A-20 - 1998

API PUBL 4661
Exploration and Production Emission Calculator (EPEC)-Disk Available

API PUBL 4662
Evaluation of a Petroleum Production Tank Emissions Model- Appendices A, B, C, & D- October 1997

API PUBL 4663
Remediation of Salt-Affected Soils at Oil and Gas Production Facilities-Errata 10/15/98

API PUBL 4664
Mixing Zone Modeling and Dilution Analysis for Water-Quality-Based NPDES Permit Limits

API PUBL 4665
Analysis and Reduction of Toxicity in Biologically Treated Petroleum Product Terminal Tank Bottoms Water

API PUBL 4666
Toxicity of Common Ions to Freshwater and Marine Organisms

API PUBL 4667
Vehicle Emissions Testing of Rapidly Aged Catalysts

API PUBL 4668
Delineation and Characterization of the Borden MTBE Plume: An Evaluation of Eight Years of Natural Attenuation Processes

API PUBL 4670
Selecting Field Analytical Methods a Decision-Tree Approach

API PUBL 4671
Technical Bulletin on Oxygen Releasing Materials for In Situ Groundwater Remediation

API PUBL 4672
The Use of Treatment Wetlands for Petroleum Industry Effluents

API PUBL 4673
Impacts of Petroleum Product Marketing Terminals on the Aquatic Environment

API PUBL 4674
Assessing the Significance of Subsurface Contaminant Vapor Migration to Enclosed Spaces Site-Specific Alternatives to Generic Estimates

API PUBL 4675
Fate and Environmental Effects of Oil Spills in Freshwater Environments

API PUBL 4676
Arsenic: Chemistry, Fate, Toxicity, and Wastewater Treatment Options

API PUBL 4677
Fugitive Emissions from Refinery Process Drains Volume I; Fugitive Emission Factors for Refinery Process Drains

API PUBL 4678
Fugitive Emissions from Refinery Process Drains Volume II; Fundamentals of Fugitive Emissions from Refinery Process Drains

API PUBL 4679
Amine Unit Emissions Model AMINECalc Version 1.0-Errata June 16, 1999; Disk Available

API PUBL 4680
Amine Unit Air Emissions Model Evaluation

API PUBL 4681
Fugitive Emissions from Refinery Process Drains Volume III, Process Drain Emission Calculator: APIDRAIN Version 1.0-Disk Available

API PUBL 4682
Free-Product Recovery of Petrolem Hydrocarbon Liquids

API PUBL 4683
Correlation Equations to Predict Reid Vapor Pressure and Properties of Gaseous Emissions for Exploration and Production Facilities

API PUBL 4684
Compilation and Review of Data on the Environmental Effects of In Situ Burning of Inland and Upland Oil Spills

API PUBL 4686
1999 Oil Spill Conference Proceedings

API PUBL 4687
1999 Internatiional Oil Spill Conference Issue Papers: Myths and Realities of Oil Spill Planning and Response: The Challenges of a Large Spill; Judgeing Oil Spill Response Performance: The Challenge of Competing Perspectives-TR IOSC-007 and TR IOSC-008

API PUBL 4688
Temporary Treatment Options for Petroleum Distribution Terminal Wastewaters

API PUBL 4690
Guide for the Use of Semipermeable Membrane Devices (SPMDs) as Samplers of Waterborne Hyhrophobic Organic Contaminats

API PUBL 4691
Fate of Spilled Oil in Marine Waters: Where Does It Go? What Does It Do? How Do Dispersants Affect It?

API PUBL 4692
A Decision-Maker?′s Guide to Dispersants: A Review of the Theory and Operational Requirements

API PUBL 4693
Effects of Oil and Chemically Dispersed Oil in the Environment

API PUBL 4694
Laboratory Analysis of Petroleum Industry Wastewaters Arranging for Analysis and Understanding Laboratory Reports

API PUBL 4695
Understanding and Preparing Applications for Petroleum Facility NPDES Discharge Permits

API PUBL 4700
Primer for Evaluating Ecological Risk at Petroleum Release Sites

API PUBL 4701
Bioaccumulation: An Evaluation of Federal and State Regulatory Initiatives

API PUBL 4702
Technologies to Reduce Oil and Grease Content of Well Treatment, Well Completion, and Workover Fluids for Overboard Disposal

API PUBL 4703
Gas Fired Boiler - Test Report Refinery Site A Characterization of Fine Particulate Emission Factor and Specification Profiles from Stationary Petroleum Industry Combustion Sources

API PUBL 4704
Gas Fired Heater - Test Report Site B Characterization of Fine Particulate Emission Factors and Specification Profiles from Stationary Petroleum Industry Combustion Sources

API PUBL 4706
Environmental Considerations for Marine Oil Spill Response

API PUBL 4709
Risk-Based Methodologies for Evaluating Petroleum Hydrocarbon Impacts at Oil and Natural Gas E&P Sites

API PUBL 4711
Methods for Determining Inputs to Environmental Petroleum Hydrocarbon Mobility and Recovery Models

API PUBL 4712
Gas-Fired Steam Generator - Test Reprot Site C: Characterization of Fine Particulate Emission Factors and Speciation Profiles from Stationary Petroleum Industry Combustion Sources

API PUBL 4713
Test Report: Fluidized Catalytic Cracking Unit at a Refinery (Site A); Characterization of Fine Particulate Emission Factors and Specification Profiles from Stationary Petroleum Industry Combustion Sources

API PUBL 4714
A Guide to Polycyclic Aromatic Hydrocarbons for the Non- Specialists

API PUBL 4720
Comparison of API and EPA Toxic Air Pollutant Emission Factors for Combustion Sources-First Edition

API PUBL 4721
Analytical Detection and Qualification Limits: Survey of State and Federal Approaches

API PUBL 4730
Groundwater Remediation Strategies Tool

API PUBL 4733
Risk-Based Screening Levels for the Protection of Livestock Exposed to Petroleum Hydrocarbons

API PUBL 4734
Modeling Study of Produced Water Release Scenarios

API PUBL 4741
Collecting and Interpreting Soil Gas Samples from the Vadose Zone A Practical Strategy for Assessing the Subsurface Vapor-to-Indoor Air Migration Pathway at Petroleum Hydrocarbon Sites

API PUBL 4743
Hazard Narrative for Tertiary-Butyl Alcohol (TBA) CAS Number 75 65 0

API PUBL 760
Model Risk Management Plan Guidance for Petroleum Refineries Guidance in Complying with EPA?′s RMP Rule (40 Code of Federal Regulations, Part 68)- Third Edition

API PUBL 761
Model Risk Management Plan Guidance for Exploration and Production (E&P) Facilities-Third Edition

API PUBL 9100A
Model Environment, Health & Saftey (EHS) Management System A Voluntary Tool for Companies Interested in Developing an EHS Management System or Enhancing an Existing System

API PUBL 9100B
Guidance Document for Model EHS Management System A Manual to Assist Companies Interested in Developing an EHS Management System or Enhancing an Existing System

API REPORT PUBL 344
Critical Review of Source Sampling and Analysis Methodologies for Characterizing Organic Aerosol and Fine Particulate Source Emission Profiles

API RP 2003
Protection Against Ignitions Arising out of Static, Lightning, and Stray Currents-Sixth Edition

API RP 2005
Service Station Safety-Sixth Edition; Supplement - 1996

API RP 2016
Guidelines and Procedures for Entering and Cleaning Petroleum Storage Tanks-First Edition

API RP 9000
Management Practices, Self-Assessment Process, and Resource Materials-Second Edition

API SECURITY
Security Vulnerability Assessment Methodology for the Petroleum and Petrochemical Industries-Second Edition

API SECURITY GUIDELINES
Security Guidelines for the Petroleum Industry-Third Edition

API SMART LEAK
Smart Leak Detection and Repair (LDAR) for Control of Fugitive Emissions

API STD 1512
Petroleum Test Laboratory Accreditation Program-First Edition

API TR 400
Preliminary Study of the Effect of Toluene on Pregnancy of the Rat (Inhalation Exposure)

API TR 401
Toluene the Effect on Pregnancy of the Rat (Inhalation Exposure)

API TR 402
Tertiary-Amyl Methyl Ether (TAME) Toxicity to the Freshwater Alga Selenastrum Capricornutum

API TR 403
Closed-Patch Repeated Insult Dermal Sensitization Study of Tertiary Amyl Methyl Ether (TAME) in Guinea Pigs (Buehler Method)

API TR 404
Inhalation Oncogenicity Study of Commercial Hexane in Rats and Mice Part I - Rats Final Abridged Report

API TR 405
Inhalation Oncogenicity Study of Commercial Hexane in Rats and Mice Part II - Mice Final Abridged Report

API TR 406
Tert-Amyl Methyl Ether (TAME) - Acute Toxicity to Daphnids (Daphnia Magna) Under Flow- Through Conditions TSCA Guideline Section Mark 797.1300

API TR 407
Tert-Amyl Methyl Ether (TAME) - Acute Toxicity to Mysid Shrimp (Mysidopsis Bahia) Under Static Renewal Conditions TSCA Guideline Section Mark 797.1930

API TR 408
Tert-Amyl Methyl Ether (TAME) - Acute Toxicity to Rainbow Trout (Oncorhynchus Mykiss) Under Flow-Through Conditions TSCA Guideline Section Mark 797.1400

API TR 409
Primary Skin Irritation Study In Rabbits of: API 91-01 and PS-6 Unleaded Test Gasolines (CAIS Abstract No. 42-2014)

API TR 410
Chromosome Aberrations in Chinese Hamster Ovary (CHO) Cells Exposed to Tertiary Amyl Methyl Ether (TAME)

API TR 411
Chinese Hamster Ovary (CHO)/HGPRT Mutation Assay of Tertiary Amyl Methyl Ether (TAME)

API TR 412
A Range-Finding Developmental Inhalation Toxicity Study of Unleaded Gasoline Vapor Condensate in Rats and Mice Via Whole-Body Exposers

API TR 414
An Inhalation Developmental Toxicity Study of Unleaded Gasoline Vapor Condensate in the Rat Via Whole-Body Exposure

1 2
API SPEC 6A
Specification for Wellhead and Christmas Tree Equipment-Nineteenth Edition; ISO 10423 Adoption; Errata 1: 9/01/2004; Errata 2: 04/25/2005; Errata 3: 06/2006

API SPEC 5L
Specification for Line Pipe-Forty-Third Edition; Errata: 12/20/2004

DOD SPEC 5L
Specification for Line Pipe-Forty-Third Edition; Errata: 12/20/2004

API STD 1104
Welding of Pipelines and Related Facilities-Twentieth Edition

DOD STD 1104
Welding of Pipelines and Related Facilities-Twentieth Edition

API SPEC 6D
ISO 14313:1999, Petroleum and Natural Gas Industries-Pipeline Transportation Systems-Pipeline Valves-Twenty-Second Edition/ISO 14313 Adoption; Errata: 3/01/2005

DOD SPEC 6D
ISO 14313:1999, Petroleum and Natural Gas Industries-Pipeline Transportation Systems-Pipeline Valves-Twenty-Second Edition/ISO 14313 Adoption; Errata: 3/01/2005

API RP 500
Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2-First Edition; Errata 10/17/1998

API RP 14C
Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms-Seventh Edition

ANSI RP 14E
Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems

API RP 14E
Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems

API SPEC 17D
Specification for Subsea Wellhead and Christmas Tree Equipment-First Edition; Supplement 1: March 1993; Supplement 2: August 1996

API RP 2A-WSD
Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms - Working Stress Design-Twenty-First Edition; Errata and Supplement 2: 10/2005

API SPEC 5CT
Specification for Casing and Tubing-Eighth Edition; ISO 11960:2004 Adoption; Effective Date: January 1, 2006; Errata: 3/31/2006; Errata 2: April 7, 2006

ANSI RP 505
Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2-First Edition; Errata 8/17/98

API RP 505
Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2-First Edition; Errata 8/17/98

API RP 2A-LRFD
Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms - Load and Resistance Factor Design-First Edition; Errata - October 1993; Supplement 1 - February 1997

API SPEC 12F
Specification for Shop Welded Tanks for Storage of Production Liquids

API RP 14J
Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities-Second Edition

ANSI SPEC 12J
Specification for Oil and Gas Separators

API SPEC 12J
Specification for Oil and Gas Separators

ANSI SPEC 16A
Specification for Drill-Through Equipment-Third Edition; ISO 13533:2001/ISO 13533 Adoption; Errata: 11/2004

API SPEC 16A
Specification for Drill-Through Equipment-Third Edition; ISO 13533:2001/ISO 13533 Adoption; Errata: 11/2004

API RP 2D
Operation and Maintenance of Offshore Cranes-Sixth Edition; Includes Errata: 05/2007

API RP 7G
Recommended Practice for Drill Stem Design and Operating Limits-Sixteenth Edition; Errata May 2000; Addendum 1: November 2003

API SPEC 2C
Specification for Offshore Pedestal Mounted Cranes-Sixth Edition

API SPEC 5B
Specification for Threading, Gauging, and Thread Inspection of Casing, Tubing, and Line Pipe Threads (U.S. Customary Units)-Fourteenth Edition; Errata 4/9/1998; Addendum 1 3/2004

DOD SPEC 5B
Specification for Threading, Gauging, and Thread Inspection of Casing, Tubing, and Line Pipe Threads (U.S. Customary Units)-Fourteenth Edition; Errata 4/9/1998; Addendum 1 3/2004

API SPEC 6FA
Specification for Fire Test for Valves-Third Edition; Errata 12/18/2006

ANSI RP 14F
Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Division 1 and Division 2 Locations-Fourth Edition

API RP 14F
Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Division 1 and Division 2 Locations-Fourth Edition

API BULL 5C3
Bulletin on Formulas and Calculations for Casing, Tubing, Drill Pipe, and Line Pipe Properties-Sixth Edition; Supplment 1 - April 1999

API RP 14G
Recommended Practice for Fire Prevention and Control on Fixed Open-type Offshore Production Platforms-Fourth Edition

API RP 5L1
Recommended Practice for Railroad Transportation of Line Pipe-Sixth Edition

API RP 17B
Recommended Practice for Flexible Pipe-Third Edition

API RP 17A
Design and Operation of Subsea Production Systems - General Requirements and Recommendations-Fourth Edition; ISO 13628-1:2005; ISO 13628-1 Adoption

API SPEC 16D
Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment-Second Edition

API BULL 5C2
Bulletin on Performance Properties of Casing, Tubing, and Drill Pipe-Twenty-First Edition

API SPEC 7
Specification for Rotary Drill Stem Elements-Fortieth Edition; Addendum 1: 8/2004; Addendum 2: 03/2006;:2006

API 6AM
Technical Report on Material Toughness-Second Edition; Formerly Bulletin 6AM

API RP 14B
Petroleum and natural gas industriesSubsurface safety valve systemsDesign, installation, operation and redress-Fifth Edition; ISO 10417

API SPEC 16C
Specification for Choke and Kill Systems

API RP 12R1
Recommended Practice for Setting, Maintenance, Inspection, Operation and Repair of Tanks in Production Service-Fifth Edition; Effective Date: 10/01/1997

API RP 53
Blowout Prevention Equipment Systems for Drilling Wells-Third Edition

API SPEC 12D
Specification for Field Welded Tanks for Storage of Production Liquids

DOD SPEC 12D
Specification for Field Welded Tanks for Storage of Production Liquids

API SPEC 2H
Specification for Carbon Manganese Steel Plate for Offshore Structures-Ninth Edition

ANSI SPEC 7K
Specification for Drilling and Well Servicing Equipment-Fourth Edition; ISO 14693:12/2005 Adoption; Addendum 1: 02/2006; Addendum 2: 4/2006

API SPEC 7K
Specification for Drilling and Well Servicing Equipment-Fourth Edition; ISO 14693:12/2005 Adoption; Addendum 1: 02/2006; Addendum 2: 4/2006

API RP 2RD
Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs)-First Edition

API SPEC 7-1 ADD 1
Specification for Rotary Drill Stem Elements

API SPEC 8C
Specification for Drilling and Production Hoisting Equipment (PSL 1 and PSL 2)-Fourth Edition; ISO 13535:2000/ ISO 13535 Adoption; Addendum 1: 11/1/2004; Addendum 2: 04/15/2005;

API SPEC 17J
Specification for Unbonded Flexible Pipe-Second Edition; Errata 5/25/2001; Addendum 1 06/2002

ANSI SPEC 17E
Specification for Subsea Umbilicals-Third Edition/ ISO 13628-5 Adoption

API SPEC 17E
Specification for Subsea Umbilicals-Third Edition/ ISO 13628-5 Adoption

API RP 2SK
Design and Analysis of Stationkeeping Systems for Floating Structures-Third Edition

ANSI SPEC 5D
Specification for Drill Pipe-Fifth Edition

API SPEC 5D
Specification for Drill Pipe-Fifth Edition

API SPEC Q1
Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry-Seventh Edition; Errata: August 2003/ISO TS29001 Adoption

API RP 5B1
Gauging and Inspection of Casing, Tubing, and Line Pipe Threads-Fifth Edition; Addendum 1: 09/2004

API SPEC 14A
Petroleum and natural gas industriesDownhole equipmentSubsurface safety valve equipment-Eleventh Edition; ISO 10432 Adoption

ANSI SPEC 9A
Specification for Wire Rope-Twenty-fifth Edition; ANSI/API SPEC 9A/ISO 10425:2003/ISO 10425 Adoption

API SPEC 9A
Specification for Wire Rope-Twenty-fifth Edition; ANSI/API SPEC 9A/ISO 10425:2003/ISO 10425 Adoption

API SPEC 2B
Specification for the Fabrication of Structural Steel Pipe-Sixth Edition

API SPEC 12P
Specification for Fiberglass Reinforced Plastic Tanks

API BULL 2V
Design of Flat Plate Structures-Third Edition

API RP 14H
Recommended Practice for Installation, Maintenance and Repair of Surface Safety Valves and Underwater Safety Valves Offshore-Fourth Edition; ISO 10419; Errata - 1996

API SPEC 4F
Specification for Drilling and Well Servicing Structures

API RP 2FPS
Recommended Practice for Planning, Designing, and Construction Floating Production Systems-First Edition

ANSI SPEC 17F
Specification for Subsea Production Control Systems-Second Edition

API SPEC 17F
Specification for Subsea Production Control Systems-Second Edition

API SPEC 5LC
Specification for CRA Line Pipe-Third Edition

API RP 55
Recommended Practices for Oil and Gas Producing and Gas Processing Plant Operations Involving Hydrogen Sulfide-Second Edition

API RP 2X
Recommended Practice for Ultrasonic and Magnetic Examination of Offshore Structural Fabrication and Guidelines for Qualification of Technicians-Fourth Edition

API SPEC 5LD
Specification for CRA Clad or Lined Steel Pipe-Second Edition

ANSI RP 17H
Remotely Operated Vehicle (ROV) Interfaces on Subsea Production Systems-First Edition: ISO 13628-8 Adoption

API RP 17H
Remotely Operated Vehicle (ROV) Interfaces on Subsea Production Systems-First Edition: ISO 13628-8 Adoption

API BULL 2U
Bulletin on Stability Design of Cylindrical Shells-Third Edition

API RP 75
Recommended Practices for Development of a Safety and Environmental Management Program for Offshore Operations and Facilities-Third Edition

API RP 5C1
Recommended Practice for Care and Use of Casing and Tubing-Eighteenth Edition

API SPEC 8A
Specification for Drilling and Production Hoisting Equipment-Thirteenth Edition; Addendum 1 May 2001

ANSI RP 17G
Recommended Practice for Completion/Workover Risers-Second Edition;: 2005

API RP 17G
Recommended Practice for Completion/Workover Risers-Second Edition;: 2005

API SPEC 16F
Specification for Marine Drilling Riser Equipment-First Edition

API SPEC 2W
Specification for Steel Plates for Offshore Structures, Produced by Thermo-Mechanical Control Processing (TMCP)-Fifth Edition; Effective Date: June 2007

ANSI RP 5A5
Field Inspection of New Casing, Tubing, and Plain-End Drill Pipe-Seventh Edition; ISO 15463 Adoption

API RP 5A5
Field Inspection of New Casing, Tubing, and Plain-End Drill Pipe-Seventh Edition; ISO 15463 Adoption

API RP 5C6
Welding Connections to Pipe-Second Edition

API RP 6DR
Repair and Remanufacture of Pipeline Valves-First Edition; G06DR1

API SPEC 12B
Specification for Bolted Tanks for Storage of Production Liquids

API TR 6AF2
Technical Report on Capabilities of API Integral Flanges under Combination of Loading - Phase II-Second Edition

API RP 5L8
Recommended Practice for Field Inspection of New Line Pipe-Second Edition

ANSI RP 11PGT
Recommended Practice for Packaged Combustion Gas Turbines

API RP 11PGT
Recommended Practice for Packaged Combustion Gas Turbines

API RP 5A3
Recommended Practice on Thread Compounds for Casing, Tubing, and Line Pipe-Second Edition/ISO 13678 Adoption

API TR 6AF
Technical Report on Capabilities of API Flanges under Combinations of Load-Second Edition

API SPEC 15HR
Specification for High Pressure Fiberglass Line Pipe-Third Edition; Addendum: 11/2004

API RP 14FZ
Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations-First Edition

API RP 2FB
Recommended Practice for the Design of Offshore Facilities Against Fire and Blast Loading-First Edition

ANSI RP 2T
Recommended Practice for Planning, Designing, and Constructing Tension Leg Platforms-Second Edition

API RP 2T
Recommended Practice for Planning, Designing, and Constructing Tension Leg Platforms-Second Edition

API RP 2L
Recommended Practice for Planning, Designing, and Constructing Heliports for Fixed Offshore Platforms

API RP 8B
Recommended Practice for Procedures for Inspections, Maintenance, Repair, and Remanufacture of Hoisting Equipment-Seventh Edition/ ISO 13534 Adoption; Addendum: 11/2003; Addendum 2: 4/2005

API SPEC 6A718
Specification of Nickel Base Alloy 718 (UNS N07718) for Oil and Gas Drilling and Production Equipment-First Edition; Errata: March 2005; Addendum: 03/31/2006

API RP 9B
Recommended Practice on Application Care, and Use of Wire Rope for Oil Field Service-Twelfth Edition

ANSI SPEC 12GDU
Specification for Glycol-Type Gas Dehydration Units

API SPEC 12GDU
Specification for Glycol-Type Gas Dehydration Units

API RP 54
Recommended Practice for Occupational Safety for Oil and Gas Well Drilling and Servicing Operations-Third Edition

API RP 2N
Recommended Practice for Planning, Designing, and Constructing Structures and Pipelines for Arctic Conditions

API VT-1
Vocational Training - Book 1 - Introduction to Oil and Gas Production-Fifth Edition

API RP 86
API Recommended Practice for Measurement of Multiphase Flow-First Edition

API RP 59
Recommended Practice for Well Control Operations-Second Edition

ANSI RP 11S4
Recommended Practice for Sizing and Selection of Electric Submersible Pump Installations-Third Edition

API RP 11S4
Recommended Practice for Sizing and Selection of Electric Submersible Pump Installations-Third Edition

ANSI RP 17C
Recommended Practice on TFL (Through Flowline) Systems-Second Edition; ISO 13628-3/ISO 13628-3 Adoption

API RP 17C
Recommended Practice on TFL (Through Flowline) Systems-Second Edition; ISO 13628-3/ISO 13628-3 Adoption

API RP 5C5
Recommended Practice on Procedures for Testing Casing and Tubing Connections-Third Edition/ISO 13679 Adoption

API RP 2Z
Recommended Practice for Preproduction Qualification for Steel Plates for Offshore Structures-Fourth Edition

API RP 7L
Procedures for Inspection, Maintenance, Repair, and Remanufacture of Drilling Equipment-Addendum 1: 02/2006; Addendum 2: 4/2006

API SPEC 15LE
Specification for Polyethylene Line Pipe (PE)

API RP 13D
Rheology and Hydraulics of Oil-well Drilling Fluids-Fifth Edition

API RP 5C7
Coiled Tubing Operations in Oil and Gas Well Services-First Edition

ANSI SPEC 15LR
Specification for Low Pressure Fiberglass Line Pipe and Fittings-Seventh Edition

API SPEC 15LR
Specification for Low Pressure Fiberglass Line Pipe and Fittings-Seventh Edition

API RP 4G
Use and Procedures for Inspection, Maintenance, and Repair of Drilling and Well Servicing Structures-Third Edition; Errata: 6/2004; Errata 1: 6/2004

API RP 5L2
Recommended Practice for Internal Coating of Line Pipe for Non-Corrosive Gas Transmission Service-Fourth Edition

API RP 12N
Recommended Practice for the Operation, Maintenance and Testing of Firebox Flame Arrestors

API RP 7C-11F
Recommended Practice for Installation, Maintenance, and Operation of Internal-Combustion Engines

API API E5
Environmental Guidance Document: Waste Management in Exploration and Production Operations-Second Edition

API RP 5UE
Recommended Practice for Ultrasonic Evaluation of Pipe Imperfections-Second Edition

API SPEC 2Y
Specification for Steel Plates, Quenched-and-Tempered, for Offshore Structures-Fifth Editon; Effective Date: June 2007

API TR 6AF1
Technical Report on Temperature Derating on API Flanges under Combination of Loading-Second Edition

API RP 64
Recommended Practices for Diverter Systems Equipment and Operations-Second Edition

API RP 45
Recommended Practice for Analysis of Oilfield Waters-Third Edition

API RP 80
Guidelines for the Definition of Onshore Gas Gathering Lines-First Edition

API RP 11S3
Recommended Practice for Electric Submersible Pump Installations-Second Edition

API VT-2
Vocational Training - Book 2 - Corrosion of Oil- and Gas-Well Equipment-Second Edition

API RP 13B-1
Recommended Practice Standard Procedure for Field Testing Water-Based Drilling Fluids-Third Edition; ANSI/API 13B-1/ISO 10414-1; Errata: July 2004

API RP 5LW
Recommended Practice for Transportation of Line Pipe on Barges and Marine Vessels-Second Edition

API RP 11AR
Recommended Practice for Care and Use of Subsurface Pumps-Fourth Edition

API SPEC 11E
Specification for Pumping Units

ANSI SPEC 17K
Specification for Bonded Flexible Pipe-Second Edition

API SPEC 17K
Specification for Bonded Flexible Pipe-Second Edition

API BULL D10
Selecting Rotary Drilling Equipment, Procedure for

API RP 5L9
External Fusion Bounded Epoxy Coating of Line Pipe-First Edition

ANSI SPEC 12K
Specification for Indirect Type Oil-Field Heaters

API SPEC 12K
Specification for Indirect Type Oil-Field Heaters

API RP 5L3
Recommended Practice for Conducting Drop-Weight Tear Tests on Line Pipe

API PUBL 4723
Refinery Stream Speciation

API RP 2I
In-Service Inspection of Mooring Hardware for Floating Drilling Units-Second Edition

API SPEC 10A
Specification for Cements and Materials for Well Cementing-Twenty-Third Edition; ANSI/API 10A/ISO 10426-1-2001/ISO 10426-1 Adoption; Errata: January 2005

ANSI SPEC 13A
Specification for Drilling-Fluid Materials-17th Edition

API SPEC 13A
Specification for Drilling-Fluid Materials-17th Edition

ANSI RP 5L7
Recommended Practices for Unprimed Internal Fusion Bonded Epoxy Coating of Line Pipe

API RP 5L7
Recommended Practices for Unprimed Internal Fusion Bonded Epoxy Coating of Line Pipe

API STD 5T1
Standard on Imperfection Terminology-Tenth Edition; Formerly Bull 5T1; Addendum 1: 9/2003

API RP 13C
Recommended Practice for Drilling Fluid Processing Systems Evaluation-Third Edition; Replaces API RP 13E; Errata: 04/2005

ANSI RP 10B-2 ERTA 2
Recommended Practice for Testing Well Cements

API RP 10B-2 ERTA 2
Recommended Practice for Testing Well Cements

API RP 49
Recommended Practice for Drilling and Well Servicing Operations Involving Hydrogen Sulfide-Third Edition

API SPEC 6AV1
Specification for Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service-First Edition; Errata - December 1996

ANSI BULL 11K
Bulletin Data Sheet for the Design of Air Exchange Coolers

API BULL 11K
Bulletin Data Sheet for the Design of Air Exchange Coolers

API BULL 2TD
Guidelines for Tie-downs on Offshore Production Facilities for Hurricane Season-First Edition

API SPEC 11D1
Petroleum and Natural Gas Industries - Downhole Equipment - Packers and Bridge Plugs-First Edition; ISO 14310:2001/ ISO 14310 Adoption

API WORLDWIDE CEMENTING
Worldwide Cementing Practices First Edition

API SPEC 16RCD
Specification for Drill Through Equipment Rotating Control Devices-First Edition

API RP 6HT
Heat Treatment and Testing of Large Cross Section and Critical Section Components-First Edition

API VT-6
Vocational Training - Book 6 - Gas Lift-Third Edition

API SPEC 6H
Specification on End Closures, Connectors and Swivels

API MPMS 17.8
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 8 - Guidelines for Pre-Loading Inspection of Marine Vessel Cargo Tanks-First Edition

API RP 44
Sampling Petroleum Reservoir Fluids-Second Edition

API RP 95F
Gulf of Mexico MODU Mooring Practices for the 2007 Hurricane Season?¢a??a€? Interim Recommendations-SECOND EDITION

API RP 13B-2
Recommended Practice for Field Testing Oil-Based Drilling Fluids-Fourth Edition

API BULL D16 TEMPLATE
Suggested Procedure for Development of Spill Prevention Control and Countermeasure Plans - Plan Template-Fourth Edition

API SPEC 6FB
API Specification for Fire Test for End Connections-Third Edition; Errata 08/20/2006; Supplement 12/18/2006

API RP 65
Cementing Shallow Water Flow Zones in Deep Water Wells-First Edition; Errata: August 2003

API VT-5
Vocational Training - Book 5 - Wireline Operations and Procedures-Third Edition

ANSI BULL 6J
Bulletin on Testing of Oilfield Elastomers - A Tutorial

API BULL 6J
Bulletin on Testing of Oilfield Elastomers - A Tutorial

API RP 90
Annular Casing Pressure Management for Offshore Wells-First Edition

API RP 11S
Recommended Practice for the Operation, Maintenance and Troubleshooting of Electric Submersible Pump Installations

API SPEC 12L
Specification for Vertical and Horizontal Emulsion Treaters

ANSI BULL 11L3
Sucker Rod Pumping System Design Book-Errata - November 1973, Supplement 1 - 1977 (R 1994)

API BULL 11L3
Sucker Rod Pumping System Design Book-Errata - November 1973, Supplement 1 - 1977 (R 1994)

API SPEC 11V1
Specification for Gas Lift Equipment

ANSI SPEC 6DSS
Specification on Subsea Pipeline Valves-FIRST EDITION; CONTAINS API MONOGRAM ANNEX AS PART OF US NATIONAL ADOPTION

API SPEC 6DSS
Specification on Subsea Pipeline Valves-FIRST EDITION; CONTAINS API MONOGRAM ANNEX AS PART OF US NATIONAL ADOPTION

ANSI RP 11L
Recommended Practice for Design Calculations for Sucker Rod Pumping Systems (Conventional Units)-Fourth Edition

API RP 11L
Recommended Practice for Design Calculations for Sucker Rod Pumping Systems (Conventional Units)-Fourth Edition

ANSI SPEC 2F
Specification for Mooring Chain-Sixth Edition

API SPEC 2F
Specification for Mooring Chain-Sixth Edition

API TR 17TR2
The Ageing of PA-11 in Flexible Pipes-First Edition

API TR 6F1
Technical Report on Performance of API and ANSI End Connections in a Fire Test According to API Specification 6FA-Third Edition

API SPEC 11B
Specification for Sucker Rods-Twenty-Sixth Edition

API SPEC 5LCP
Specification for Coiled Line Pipe-Second Edition

API RP 51
Onshore Oil and Gas Production Practices for Protection of the Environment-Third Edition

API RP 67
Recommended Practices for Oilfield Explosives Safety-Second Edition

API RP 15S
Qualification of Spoolable Reinforced Plastic Line Pipe-First Edition

ANSI RP 7A1
Recommended Practice for Testing of Thread Compound for Rotary Shouldered Connections

API RP 7A1
Recommended Practice for Testing of Thread Compound for Rotary Shouldered Connections

API SPEC 11AX
Specification for Subsurface Sucker Rod Pumps and Fittings-Twelfth Edition

API SPEC 11IW
Specification for Independent Wellhead Equipment-First Edition

API SPEC 11N
Specification for Lease Automatic Custody Transfer (LACT) Equipment

API VT-3
Vocational Training - Book 3 - Subsurface Salt Water Injection and Disposal-Third Edition

API TR 17TR3
An Evaluation of the Risks and Benefits of Penetrations in Subsea Wellheads below the BOP Stack

ANSI BULL 11L4
Curves for Selecting Beam Pumping Units

API BULL 11L4
Curves for Selecting Beam Pumping Units

API BULL D14
Statistical Analysis of Crude Oil Recovery and Recovery Efficiency

ANSI RP 11BR
Recommended Practice for Care and Handling of Sucker Rods-Eighth Edition; Supplement 1 10-1-1990; Supplement 2 7-1-1991

API RP 11BR
Recommended Practice for Care and Handling of Sucker Rods-Eighth Edition; Supplement 1 10-1-1990; Supplement 2 7-1-1991

API SPEC 6FD
Specification for Fire Test for Check Valves

API BULL E4
Environmental Guidance Document: Release Reporting for the Oil and Gas Exploration and Production Industry as Required by the Clean Water Act, the Comprehensive Environmental Response, Compensation and Liability Act, and the Emergency Planning and Community Right-to-Know Act-Second Edition

API BULL E1
Bulletin on the Generic Hazardous Chemical Category List and Inv. for the Oil and Gas Exploration and Production Ind. Superfund Amendments and Reauthorization Act of 1986, Emer. Planning & Comm. Right-to-Know Act, Title III Sec. 311 and 312

API BULL D16
Suggested Procedure for Development of Spill Prevention Control and Countermeasure Plans-Third Edition

API BULL E2
Bulletin on Management of Naturally Occurring Radioactive Materials (NORM) in Oil & Gas Production-Second Edition

API RP 17M
Remotely Operated Tool (ROT) Intervention Systems-First Edition; ISO 13628-9:2000 Adoption

API SPEC 2MT1
Specification for Carbon Manganese Steel Plate with Improved Toughness for Offshore Structures-Second Edition

API TR 17TR1
Evaluation Standard for Internal Pressure Sheath Polymers for High Temperature Flexible Pipes-First Edition

API PUBL 4589
Fugitive Hydrocarbon Emissions from Oil and Gas Production Operations

API RP 11S6
Recommended Practice for Testing of Electric Submersible Pump Cable Systems

API SPEC 7B-11C
Specification for Internal-Combustion Reciprocating Engines for Oil-Field Service

API BULL 2S
Design of Windlass Wildcats for Floating Offshore Structures-Second Edition

API RP 50
Natural Gas Processing Plant Practices for Protection of the Environment-Second Edition

API RP 85
Use of Subsea Wet-gas Flowmeters in Allocation Measurement Systems-First Edition

API RP 13J
Testing of Heavy Brines-Fourth Edition

API RP 74
Recommended Practice for Occupational Ssfety for Onshore Oil and Gas Production Operations-First Edition

API SPEC 11L6
Specification for Electric Motor Prime Mover for Beam Pumping Unit Service-First Edition; Supplement 1 1996

API SPEC 6FC
Specification for Fire Test for Valves with Automatic Backseats-Third Edition

API RP 11S2
Recommended Practice for Electric Submersible Pump Testing-Second Edition; Effective Date: 10/01/1997

API RP 19B
Recommended Practices for Evaluation of Well Perforators-SECOND EDITION

API BULL E3
Environmental Guidance Document: Well Abandonment and Inactive Well Practices for U.S. Exploration and Production Operations-First Edition

API RP 76
Contractor Safety Management for Oil and Gas Drilling and Production Operations-First Edition

API SPEC 14L
Lock Mandrels and Landing Nipples-First Edition/ ISO 16070 Adoption

API SPEC 10D
Specification for Bow-Spring Casing Centralizers-Sixth Edition; ANSI/API 10D/ISO 10427-1-2001/ISO 10427-1 Adoption

API RP 11G
Recommended Practice for Installation and Lubrication of Pumping Units

API RP 11V8
Recommended Practice for Gas Lift System Design and Performance Prediction-First Edition

API RP 13I
Recommended Practice for Laboratory Testing of Drilling Fluids-Seventh Edition

API INTERPRETATIONS 1988
1988 Interpretations - Technical Publications Answers to Technical Inquiries

API INTERPRETATIONS 1995
1994 and 1995 Interpretations - Technical Publications Answers to Technical Inquiries

ANSI RP 11S8
Recommended Practice on Electric Submersible Pump System Vibrations

API RP 11S8
Recommended Practice on Electric Submersible Pump System Vibrations

API SPEC 7F
Specification for Oil-Field Chain and Sprockets-Seventh Edition

API RP 11S1
Recommended Practice for Electrical Submersible Pump Teardown Report-Third Edition

ANSI RP 11V6
Recommended Practice for Design of Continuous Flow Gas Lift Installations Using Injection Pressure Operated Valves-Second Edition

API RP 11V6
Recommended Practice for Design of Continuous Flow Gas Lift Installations Using Injection Pressure Operated Valves-Second Edition

API RP 10F
Recommended Practice for Performance Testing of Cementing Float Equipment-Third Edition; ANSI/API 10F/ISO 18165-2001/ISO 18165 Adoption; Errata 2003

API RP 5SI
Recommended Practice for Purchaser Representative Surveillance and/or Inspection at the Supplier-First Edition

API RP T-2
Qualification Programs for Offshore Production Personnel Who Work with Safety Devices-Second Edition

API RP 11V2
Gas-Lift Valve Performance Testing-Second Edition

ANSI RP 11S5
Recommended Practice for Application of Electric Submersible Cable Systems

API RP 11S5
Recommended Practice for Application of Electric Submersible Cable Systems

API RP 70
Security for Offshore Oil and Natural Gas Operations-First Edition

ANSI RP 11V7
Recommended Practice for Repair, Testing, and Setting Gas Lift Valves-Second Edition

API RP 11V7
Recommended Practice for Repair, Testing, and Setting Gas Lift Valves-Second Edition

API TR 6J1
Elastomer Life Estimation Testing Procedures-First Edition

API SPEC 2MT2
Rolled Shapes with Improved Notch Toughness-First Edition

API SPEC 7NRV
Specification for Drill String Non-return Valves

API PUBL 3802
Audit Control Cuide

API RP 52
Land Drilling Practices for Protection of the Environment-Second Edition

API RP 95J
Gulf of Mexico Jackup Operations for Hurricane SeasonInterim Recommendations-First Edition

ANSI RP 10D-2
Recommended Practice for Centralizer Placement and Stop Collar Testing-First Edition: ISO 10427-2 Adoption

API RP 10D-2
Recommended Practice for Centralizer Placement and Stop Collar Testing-First Edition: ISO 10427-2 Adoption

API REPORT OF LINE PIPE
Report of Eastern and Western Hemisphere Production of Line Pipe

ANSI RP 11V5
Recommended Practice for Operations, Maintenance, and Trouble-Shooting of Gas Lift Installations-Second Edition

API RP 11V5
Recommended Practice for Operations, Maintenance, and Trouble-Shooting of Gas Lift Installations-Second Edition

API INTERPRETATIONS 1989
1989 and 1990 Interpretations - Technical Publications Answers to Technical Inquiries

API REPORT OF CASING
Report of Eastern and Western Hemisphere Production of Casing, Tubing and Drill Pipe

API RP 70I
Security for Worldwide Offshore Oil and Natural Gas Operations-First Edition

API RP 11S7
Recommended Practice on Application and Testing of Electric Submersible Pump Seal Chamber Sections

API PUBL 4615
Emission Factors for Oil and Gas Production Operations

ANSI RP 11ER
Recommended Practice for Guarding of Pumping Units

API RP 11ER
Recommended Practice for Guarding of Pumping Units

API RP T-1
Orientation Programs for Personnel Going Offshore for the First Time-Fourth Edition

ANSI BULL 11L2
Catalog of Analog Computer Dynamometer Cards

API BULL 11L2
Catalog of Analog Computer Dynamometer Cards

ANSI RP 13M-4
Recommended Practice for Measuring Stimulation and Gravel-pack Fluid Leakoff Under Static Conditions-First Edition; ISO 13503-4 Adoption

API RP 13M-4
Recommended Practice for Measuring Stimulation and Gravel-pack Fluid Leakoff Under Static Conditions-First Edition; ISO 13503-4 Adoption

API RP 56
Recommended Practices for Testing Sand Used in Hydraulic Fracturing Operations-Second Edition

API RP T-6
Training and Qualification of Personnel in Well Control Equipment and Techniques for Wireline Operations in Offshore Location-First Edition

API REPORT 91-48
Growth Rate of Short Fatigue Cracks as Relevant to Higher Strength Steels for Offshore Structures (Year-Two)

API TR 10TR3
Technical Report on Temperatures for API Cement Operating Thickening Time Tests; 1993 Report from the API Task Group on Cementing Temperature Schedules-First Edition

API BULL D8
Tabular Method for Determining the Change of the Overall Angle and Dog-Leg Severity (for Hole Inclinations up to 70 Degrees)

API PUBL 7103
Management and Disposal Alternatives for Naturally Occurring Radioactive Material (NORM) Wastes in Oil Production and Gas Plant Equipment

ANSI RP 10B-4
Recommended Practice on Preparation and Testing of Foamed Cement Slurries at Atmospheric Pressure-First Edition; ISO 10426-4 Adoption

API RP 10B-4
Recommended Practice on Preparation and Testing of Foamed Cement Slurries at Atmospheric Pressure-First Edition; ISO 10426-4 Adoption

API RP 10B-5
Recommended Practice on Determination of Shrinkage and Expansion of Well Cement Formulations at Atmospheric Pressure-First Edition; ISO 10426-5 Adoption

ANSI RP 13K
Recommended Practice for Chemical Analysis of Barite-Second Edition; Errata 4/25/1998

API RP 13K
Recommended Practice for Chemical Analysis of Barite-Second Edition; Errata 4/25/1998

API RP 60
Recommended Practices for Testing High-Strength Proppants Used in Hydraulic Fracturing Operations-Second Edition

API RP 15TL4
Recommended Practice for Care and Use of Fiberglass Tubulars-Second Edition

ANSI RP 10B-3
Recommended Practice on Testing of Deepwater Well Cement Formulations-First Edition; ISO 10426-3 Adoption

API RP 10B-3
Recommended Practice on Testing of Deepwater Well Cement Formulations-First Edition; ISO 10426-3 Adoption

API BULL 91
Planning and Conducting Surface Preparation and Coating Operations for Oil and Natural Gas Drilling and Production Facilities in a Marine Environment-FIRST EDITION

API RP 13L
Recommended Practice for Training and Qualification of Drilling Fluid Technologists-First Edition

API INTERPRETATIONS 1991
1991 Interpretations - Technical Publications Answers to Technical Inquiries

API RP 11T
Recommended Practice for Installation and Operation of Wet Steam Generators

API RP 41
Recommended Practice for Presenting Performance Data on Cementing and Hydraulic Fracturing Equipment-Second Edition

API RP 63
Recommended Practices for Evaluation of Polymers Used in Enhanced Oil Recovery Operations-First Edition

ANSI RP 13M
Recommended Practice for the Measurement of Viscous Properties of Completion Fluids-First Edition; ISO 13503-1 Adoption

API RP 13M
Recommended Practice for the Measurement of Viscous Properties of Completion Fluids-First Edition; ISO 13503-1 Adoption

API TR 10TR2
Shrinkage and Expansion in Oilwell Cements-First Edition

API REPORT 5TRSR22
Technical Report on SR22, Supplementary Requirements for Enhanced Leak Resistance LTC-First Edition

API SPEC 1B
Specification for Oil-Field V-Belt

API PUBL 4638
Calculation Workbook for Oil and Gas Production Equipment Fugitive Emissions

API RP T-7
Training of Personnel in Rescue of Persons in Water-Second Edition

API RP 11L1
Design Calculations Conventional Socker Rod Pumping Systems

API RP 58
Recommended Practices for Testing Sand Used in Gravel Packing Operations-Second Edition

API INTERPRETATIONS 1993
1993 Interpretations - Technical Publications Answers to Technical Inquiries

API PUBL 4677
Fugitive Emissions from Refinery Process Drains Volume I; Fugitive Emission Factors for Refinery Process Drains

API TR 10TR1
Cement Sheath Evaluation-First Edition

API INTERPRETATIONS 1992
1992 Interpretations - Technical Publications Answers to Technical Inquiries

API PUBL 7102
Methods for Measuring Naturally Occurring Radioactive Materials (NORM) in Petroleum Production Equipment

API PUBL 3860
Petroleum Industry Data Exchange PIDX Implementation Guideline for EDI Electronic Data Interchange

API RP 11S2 RUSSIAN
Recommended Practice for Electric Submersible Pump Testing-Second Edition; Effective Date: 10/01/1997

API RP 31A
Standard Form for Hardcopy Presentation of Downhole Well Log Data-First Edition

API PUBL 3810
CODE - Crude Oil Data Exchange Implementation Guidelines

API PUBL 4683
Correlation Equations to Predict Reid Vapor Pressure and Properties of Gaseous Emissions for Exploration and Production Facilities

API PUBL 4678
Fugitive Emissions from Refinery Process Drains Volume II; Fundamentals of Fugitive Emissions from Refinery Process Drains

API PUBL 4722
Groundwater Sensitivity Toolkit

API PUBL 3855
Conventions and Implementation Guidelines for EDI Wellsite Information Transfer Specification (WITS)-Version 1.1

API PUBL 4663
Remediation of Salt-Affected Soils at Oil and Gas Production Facilities-Errata 10/15/98

API PUBL 7101
National Survey on Naturally Occurring Radioactive Material (NORM) in Petroleum Production and Gas Processing Facilities

API PUBL 4611
Interlaboratory Study of EPA Methods 1662, 1654A, and 1663 for the Determination of Diesel, Mineral and Crude Oils in Drilling Muds from Offshore Oil and Gas Industry Discharges

API PUBL 7100
A Naturally Occurring Radioactive Material (NORM) Disposal Cost Study-First Edition

API PUBL 3815
COS - Crude Oil Settlements

API PUBL 4641
Summary of Produced Water Toxicity Identification Evaluation Research

API PUBL 4680
Amine Unit Air Emissions Model Evaluation

API PUBL 4731
Light Non-Aqueous Phase Liquid (LNAPL) Parameters Database - Version 2.0 - User Guide

API PUBL 7104
Proceedings of the 1995 API and GRI Naturally Occurring Radioactive Material (NORM) Conference

API PUBL 3820
Grade; Gas Revenue Accounting Data Exchange; Grade User Manual

API PUBL 4633
Barium in Produced Water: Fate and Effects in the Marine Environment

API PUBL 4662
Evaluation of a Petroleum Production Tank Emissions Model-Appendices A, B, C, & D- October 1997

API PUBL 4717
Predictors of Water-Soluble Organics (WS0s) in Produced Water - A Literature Review

API PUBL 4729
Models for Design of Free-Product Recovery Systems for Petroleum Hydrocarbon Liquids

API PUBL 3805
CDEX - Check Stub Data Exchange Formats

API PUBL 7105
Probabilistic Estimates of Dose and Indoor Radon Concentrations Attributable to Remediated Oilfield Naturally Occuring Radioactive Material (NORM)

API PUBL 3865
PIDD - Petroleum Industry Data Dicitionary-Diskette only
API H00005
Manual of Petroleum Measurement Standards - Draft Standard - Sediment and Water - Continuous On-Line Measurement of Water Content in Petroleum and Petroleum Products-First Edition

API H00008
Measurement of Liquid Hydrocarbons by Ultrasonic Flowmeters Using Transit Time Technology-First Edition

API MPMS 1
Manual of Petroleum Measurement Standards Chapter 1 - Vocabulary

API MPMS 10.1
Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water, Section 1 - Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method-Second Edition

API MPMS 10.2
Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 2 - Determination of Water in Crude Oil by the Distillation Method

API MPMS 10.3
Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 3 - Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)-Second Edition

API MPMS 10.4
Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 4 - Determination of Water and/or Sediment in Crude Oil by the Centrifuge Method (Field Procedure)

API MPMS 10.9
Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 9 - Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration-Second Edition

API MPMS 11.1
Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils-VCF Software; Software Application - To Purchase the Software Application call 1-800-854-7179

API MPMS 11.2
Manual of Petroleum Measurement Standards Chapter 11.2.1 and 11.2.1M - Compressibility Factors for Hydrocarbons: 0-90 Degrees API Gravity and 638-1074 Kilograms per Cubic Metre Ranges Chapter 11.2.3 and 11.2.3M - Water Calibration of Provers Computer Tape

API MPMS 11.2.2
Manual of Petroleum Measurement Standards Chapter 11.2.2 - Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60 Degrees F/ 60 Degrees F) and -50 Degrees F to 140 Degrees F Metering Temperature-Second Edition; GPA 8286-86; Errata:June

API MPMS 11.2.2 ADDENDUM
Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Addendum to Section 2, Part 2 - Compressibility Factors for Hydrocarbons, Correlation of Vapor Pressure for Commercial Natural Gas Liquids-First Edition; Errata 1996

API MPMS 11.2.2M
Manual of Petroleum Measurement Standards Chapter 11.2.2M - Compressibility Factors for Hydrocarbons: 350-637 Kilograms per Cubic Metre Density (15 Degrees C) and -46 Degrees C to 60 Degrees C Metering Temperature

API MPMS 11.3.2.1
Manual of Petroleum Measurement Standards Chapter 11.3.2.1 - Ethylene Density Measurement Manual-Disk Available

API MPMS 11.3.3.2
Manual of Petroleum Measurement Standards Chapter 11.3.3.2 - Propylene Compressibility Tables-Disk Available

API MPMS 12.1.1
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 1 - Upright Cylindrical Tanks and Marine Vessels-Second Edition

API MPMS 12.1.2
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 2 - Calculation Procedures for Tank Cars-First Edition

API MPMS 12.2
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Liquid Petroleum Quantities Measured by Turbine or Displacement Meters-First Edition

API MPMS 12.2.1
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 1 - Introduction- Second Edition

API MPMS 12.2.2
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 2 - Measurement Tickets-Third Edition

API MPMS 12.2.3
Calculation of Petroleum Quantities - Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors - Part 3 - Proving Reports-First Edition

API MPMS 12.2.4
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 4 - Calculation of Base Prover Volumes by t

API MPMS 14.4
Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 4 - Converting Mass of Natural Gas Liquids and Vapors to Equivalent Liquid Volumes-First Edition

API MPMS 14.8
Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 8 - Liquefied Petroleum Gas Measurement-Second Edition

API MPMS 15
Manual of Petroleum Measurement Standards Chapter 15 - Guidelines for the Use of the International System of Units (SI) in the Petroleum and Allied Industries-API PUBL 2564

API MPMS 16.2
Manual of Petroleum Measurement Standards Chapter 16 - Measurement of Hydrocarbon Fluids by Weight or Mass Section 2 - Mass Measurement of Liquid Hydrocarbons in Vertical Cylindrical Storage Tanks by Hydrostatic Tank Gauging-First Edition

API MPMS 17.1
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 1 - Guidelines for Marine Cargo Inspection-Fourth Edition; Errata: June 2005

API MPMS 17.2
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 2 - Measurement of Cargoes on Board Tank Vessels-Second Edition; Errata: April 28, 2000

API MPMS 17.3
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 3 - Guidelines for Identification of the Source of Free Waters Associated with Marine Petroleum Cargo Movements-First Edition; Errata - 1992

API MPMS 17.4
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 4 - Method for Quantification of Small Volumes on Marine Vessels (OBQ/ROB)

API MPMS 17.5
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 5 - Guidelines for Cargo Analysis and Reconciliation of Cargo Quantities-Second Edition

API MPMS 17.6
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 6 - Guidelines for Determining the Fullness of Pipelines between Vessels and Shore Tanks-First Edition

API MPMS 17.7
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 7 - Recommended Practices for Developing Barge Control Factors (Volume Ratio)

API MPMS 17.8
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 8 - Guidelines for Pre-Loading Inspection of Marine Vessel Cargo Tanks-First Edition

API MPMS 17.9
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 9Vessel Experience Factor (VEF) IP Hydrocarbon Management HM 49- First Edition

API MPMS 19.1
Manual of Petroleum Measurement Standards Chapter 19 - Evaporative Loss Measurement Section 1 - Evaporative Loss from Fixed-Roof Tanks-Third Edition

API MPMS 19.2
Manual of Petroleum Measurement Standards Chapter 19 - Evaporative Loss Measurement Section 2 - Evaporative Loss from Floating-Roof Tanks- Second Edition; Formerly, API Publications 2517 and 2519

API MPMS 2.2E
Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 1: Manual Methods-First Edition; ISO 12917-1 Adoption

API MPMS 2.7
Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 7 - Calibration of Barge Tanks-First Edition

API MPMS 2.8A
Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 8A - Calibration of Tanks on Ships and Oceangoing Barges-First Edition

API MPMS 3.1A
Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1A - Standard Practice for the Manual Gauging of Petroleum and Petroleum Products-Second Edition

API MPMS 3.1B
Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1B - Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging-Second Edition

API MPMS 3.5
Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging; Section 5 - Standard Practice for Level Measurement of Light Hydrocarbon Liquids Onboard Marine Vessels by Automatic Tank Gauging-First Edition

API MPMS 4.1
Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 1 - Introduction-Third Edition

API MPMS 4.2
Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 2 - Displacement Provers-Third Edition

API MPMS 4.5
Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 5 - Master-Meter Provers-Second Edition; Supersedes 1101, 2531, 2533, 2534

API MPMS 4.6
Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 6 - Pulse Interpolation-Second Edition

API MPMS 4.7
Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 7 - Field - Standard Test Measures-Second Edition

API MPMS 4.8
Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 8 - Operation of Proving Systems

API MPMS 4.9.1
Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and 1Introduction to the Determination of the Volume of Displacement and Tank Provers-First Edition

API MPMS 4.9.2
Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and Volumetric Tank Provers Part 2Determination of the Volume of Displacement and Tank Provers by the Waterdraw Method of Calibration-First

API MPMS 5.1
Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 1 - General Considerations for Measurement by Meters-Fourth Edition

API MPMS 5.3
Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 3 - Measurement of Liquid Hydrocarbons by Turbine Meters-Fifth Edition

API MPMS 5.4
Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 4 - Accessory Equipment for Liquid Meters-Fourth Edition

API MPMS 5.5
Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 5 - Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems- Second Edition

API MPMS 5.6
Metering, Section 6 - Measurment of Liquid Hydrocarbons by Coriolis Meters-First Edition; Replaces API H00004 and API H00006

API MPMS 5.8
Manual of Petroluem Measurement Standards Chapter 5 - Metering - Section 8 - Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology-First Edition

API MPMS 6.5
Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 5 - Metering Systems for Loading and Unloading Marine Bulk Carriers- Second Edition

API MPMS 6.7
Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 7 - Metering Viscous Hydrocarbons-Second Edition

API MPMS 8.2
Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 2 - Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products-Second Edition; ASTM D4177

API MPMS 8.3
Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 3 - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products-First Edition; ASTM D5854

API MPMS 8.4
Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 4 - Standard Practice for Sampling and Handling of Fuels for Volatility Measurement- Second Edition

API MPMS 9.1
Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 1 - Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method-Second Edit

API MPMS 9.2
Manual of Petroleum Measurement Standards Chapter 9 - Determination Section 2 - Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer-Second Edition

API MPMS 9.3
Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 3 - Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method-Second Edition

API PUBL 2514A
Atmospheric Hydrocarbon Emissions from Marine Vessel Transfer Operations-Second Edition

API PUBL 2524
Impact Assessment of New Data on the Validity of American Petroleum Institute Marine Transfer Operation Emission Factors

API STD 1163
In-line Inspection Systems Qualification Standard-First Edition

API H00005
Manual of Petroleum Measurement Standards - Draft Standard - Sediment and Water - Continuous On-Line Measurement of Water Content in Petroleum and Petroleum Products-First Edition

API H00008
Measurement of Liquid Hydrocarbons by Ultrasonic Flowmeters Using Transit Time Technology-First Edition

API MPMS 1
Manual of Petroleum Measurement Standards Chapter 1 - Vocabulary

API MPMS 11.1
Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils-VCF Software; Software Application - To Purchase the Software Application call 1-800-854-7179

API MPMS 11.2
Manual of Petroleum Measurement Standards Chapter 11.2.1 and 11.2.1M - Compressibility Factors for Hydrocarbons: 0-90 Degrees API Gravity and 638-1074 Kilograms per Cubic Metre Ranges Chapter 11.2.3 and 11.2.3M - Water Calibration of Provers Computer Tape

API MPMS 11.2.2
Manual of Petroleum Measurement Standards Chapter 11.2.2 - Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60 Degrees F/ 60 Degrees F) and -50 Degrees F to 140 Degrees F Metering Temperature-Second Edition; GPA 8286-86; Errata:June

API MPMS 11.2.2 ADDENDUM
Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Addendum to Section 2, Part 2 - Compressibility Factors for Hydrocarbons, Correlation of Vapor Pressure for Commercial Natural Gas Liquids-First Edition; Errata 1996

API MPMS 11.2.2M
Manual of Petroleum Measurement Standards Chapter 11.2.2M - Compressibility Factors for Hydrocarbons: 350-637 Kilograms per Cubic Metre Density (15 Degrees C) and -46 Degrees C to 60 Degrees C Metering Temperature

API MPMS 11.3.2.1
Manual of Petroleum Measurement Standards Chapter 11.3.2.1 - Ethylene Density Measurement Manual-Disk Available

API MPMS 11.3.3.2
Manual of Petroleum Measurement Standards Chapter 11.3.3.2 - Propylene Compressibility Tables-Disk Available

API MPMS 12.1.1
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 1 - Upright Cylindrical Tanks and Marine Vessels-Second Edition

API MPMS 12.1.2
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 2 - Calculation Procedures for Tank Cars-First Edition

API MPMS 12.2
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Liquid Petroleum Quantities Measured by Turbine or Displacement Meters-First Edition

API MPMS 12.2.1
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 1 - Introduction- Second Edition

API MPMS 12.2.2
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 2 - Measurement Tickets-Third Edition

API MPMS 12.2.3
Calculation of Petroleum Quantities - Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors - Part 3 - Proving Reports-First Edition

API MPMS 12.2.4
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 4 - Calculation of Base Prover Volumes by t

API MPMS 14.3.1
Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 1 - General Equations and Uncertainty Guidelines-Third Edition; Errata - 1991; Errata - 1993; Replaces API MPMS

API MPMS 14.3.3
Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 3 - Natural Gas Applications

API MPMS 14.4
Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 4 - Converting Mass of Natural Gas Liquids and Vapors to Equivalent Liquid Volumes-First Edition

API MPMS 14.5
Calculation of Gross Heating Value, Relative Density and Compressibility Factor for Natural Gas Mixtures from Compositional Analysis-GPA STD 2172- 96

API MPMS 14.8
Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 8 - Liquefied Petroleum Gas Measurement-Second Edition

API MPMS 17.1
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 1 - Guidelines for Marine Cargo Inspection-Fourth Edition; Errata: June 2005

API MPMS 2.2A
Manual of Petroleum Measurement Standard Chapter 2 - Tank Calibration Section 2A - Measurement and Calibration of Upright Cylindrical Tanks by the Manual Tank Strapping Method-First Edition

API MPMS 2.2B
Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2B - Calibration of Upright Cylindrical Tanks Using the Optical Reference Line Method-First Edition

API MPMS 2.2C
Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2C - Calibration of Upright Cylindrical Tanks Using the Optical- Triangulation Method-First Edition/ ISO 7507-3 Adoption

API MPMS 2.2D
Manual of Petroleum Measurement Standards Chapter 2 Tank Calibration Section 2D Calibration of Upright Cylindrical Tanks Using the Internal Electrooptical Distance Ranging Method-First Edition/ISO 7507-4 Adoption

API MPMS 2.2E
Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 1: Manual Methods-First Edition; ISO 12917-1 Adoption

API MPMS 2.2F
Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 2: Internal Electro-Optical Distance-Ranging Method-First Edition; ISO 12917-2 Adoption

API MPMS 2.7
Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 7 - Calibration of Barge Tanks-First Edition

API MPMS 2.8A
Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 8A - Calibration of Tanks on Ships and Oceangoing Barges-First Edition

API MPMS 20.1
Manual of Petroleum Measurement Standards Chapter 20 - Allocation Measurement Section 1 - Allocation Measurement

API MPMS 21.1
Manual of Petroleum Measurement Standards Chapter 21 - Flow Measurement Using Electronic Metering Systems Section 1 - Electronic Gas Measurement

API MPMS 22.2
Manual of Petroleum Measurement Standards Chapter 22Testing Protocol Section 2Differential Pressure Flow Measurement Devices-First Edition; Replaces MPMS 5.7:2003

API MPMS 3.1A
Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1A - Standard Practice for the Manual Gauging of Petroleum and Petroleum Products-Second Edition

API MPMS 3.1B
Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1B - Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging-Second Edition

API MPMS 3.2
Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 2 - Standard Practice for Gauging Petroleum and Petroleum Products in Tank Cars-First Edition; Replaces STD 2545

API MPMS 3.3
Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 3 - Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Pressurized Storage Tanks by Automatic Tank Gauging-First Edition; Replaces STD 2545

API MPMS 3.5
Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging; Section 5 - Standard Practice for Level Measurement of Light Hydrocarbon Liquids Onboard Marine Vessels by Automatic Tank Gauging-First Edition

API MPMS 4.1
Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 1 - Introduction-Third Edition

API MPMS 4.2
Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 2 - Displacement Provers-Third Edition

API MPMS 4.5
Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 5 - Master-Meter Provers-Second Edition; Supersedes 1101, 2531, 2533, 2534

API MPMS 4.6
Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 6 - Pulse Interpolation-Second Edition

API MPMS 4.7
Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 7 - Field - Standard Test Measures-Second Edition

API MPMS 4.8
Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 8 - Operation of Proving Systems

API MPMS 4.9.1
Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and 1Introduction to the Determination of the Volume of Displacement and Tank Provers-First Edition

API MPMS 4.9.2
Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and Volumetric Tank Provers Part 2Determination of the Volume of Displacement and Tank Provers by the Waterdraw Method of Calibration-First

API MPMS 5.1
Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 1 - General Considerations for Measurement by Meters-Fourth Edition

API MPMS 5.3
Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 3 - Measurement of Liquid Hydrocarbons by Turbine Meters-Fifth Edition

API MPMS 5.4
Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 4 - Accessory Equipment for Liquid Meters-Fourth Edition

API MPMS 5.5
Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 5 - Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems- Second Edition

API MPMS 5.6
Metering, Section 6 - Measurment of Liquid Hydrocarbons by Coriolis Meters-First Edition; Replaces API H00004 and API H00006

API MPMS 5.8
Manual of Petroluem Measurement Standards Chapter 5 - Metering - Section 8 - Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology-First Edition

API MPMS 8.2
Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 2 - Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products-Second Edition; ASTM D4177

API MPMS 8.3
Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 3 - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products-First Edition; ASTM D5854

API MPMS 8.4
Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 4 - Standard Practice for Sampling and Handling of Fuels for Volatility Measurement- Second Edition

API MPMS 9.1
Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 1 - Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method-Second Edit

API MPMS 9.2
Manual of Petroleum Measurement Standards Chapter 9 - Determination Section 2 - Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer-Second Edition

API MPMS 9.3
Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 3 - Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method-Second Edition

API STD 2551
Standard Method for Measurement and Calibration of Horizontal Tanks-ASTM D1410
API H00005
Manual of Petroleum Measurement Standards - Draft Standard - Sediment and Water - Continuous On-Line Measurement of Water Content in Petroleum and Petroleum Products-First Edition

API H00008
Measurement of Liquid Hydrocarbons by Ultrasonic Flowmeters Using Transit Time Technology-First Edition

API MPMS 1
Manual of Petroleum Measurement Standards Chapter 1 - Vocabulary

API MPMS 10.5
Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 5 - Standard Test Method of Water in Petroleum Products and Bituminous Materials by Distillation-Fourth Edition

API MPMS 10.6
Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 6 - Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)-Fourth Edition

API MPMS 11.1
Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils-VCF Software; Software Application - To Purchase the Software Application call 1-800-854-7179

API MPMS 11.2
Manual of Petroleum Measurement Standards Chapter 11.2.1 and 11.2.1M - Compressibility Factors for Hydrocarbons: 0-90 Degrees API Gravity and 638-1074 Kilograms per Cubic Metre Ranges Chapter 11.2.3 and 11.2.3M - Water Calibration of Provers Computer Tape

API MPMS 11.2.2
Manual of Petroleum Measurement Standards Chapter 11.2.2 - Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60 Degrees F/ 60 Degrees F) and -50 Degrees F to 140 Degrees F Metering Temperature-Second Edition; GPA 8286-86; Errata:June

API MPMS 11.2.2 ADDENDUM
Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Addendum to Section 2, Part 2 - Compressibility Factors for Hydrocarbons, Correlation of Vapor Pressure for Commercial Natural Gas Liquids-First Edition; Errata 1996

API MPMS 11.2.2M
Manual of Petroleum Measurement Standards Chapter 11.2.2M - Compressibility Factors for Hydrocarbons: 350-637 Kilograms per Cubic Metre Density (15 Degrees C) and -46 Degrees C to 60 Degrees C Metering Temperature

API MPMS 11.3.2.1
Manual of Petroleum Measurement Standards Chapter 11.3.2.1 - Ethylene Density Measurement Manual-Disk Available

API MPMS 11.3.3.2
Manual of Petroleum Measurement Standards Chapter 11.3.3.2 - Propylene Compressibility Tables-Disk Available

API MPMS 12.1.1
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 1 - Upright Cylindrical Tanks and Marine Vessels-Second Edition

API MPMS 12.1.2
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 2 - Calculation Procedures for Tank Cars-First Edition

API MPMS 12.2
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Liquid Petroleum Quantities Measured by Turbine or Displacement Meters-First Edition

API MPMS 12.2.1
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 1 - Introduction- Second Edition

API MPMS 12.2.2
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 2 - Measurement Tickets-Third Edition

API MPMS 12.2.3
Calculation of Petroleum Quantities - Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors - Part 3 - Proving Reports-First Edition

API MPMS 12.2.4
Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 4 - Calculation of Base Prover Volumes by t

API MPMS 14.3.1
Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 1 - General Equations and Uncertainty Guidelines-Third Edition; Errata - 1991; Errata - 1993; Replaces API MPMS

API MPMS 14.3.3
Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 3 - Natural Gas Applications

API MPMS 14.4
Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 4 - Converting Mass of Natural Gas Liquids and Vapors to Equivalent Liquid Volumes-First Edition

API MPMS 14.8
Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 8 - Liquefied Petroleum Gas Measurement-Second Edition

API MPMS 16.2
Manual of Petroleum Measurement Standards Chapter 16 - Measurement of Hydrocarbon Fluids by Weight or Mass Section 2 - Mass Measurement of Liquid Hydrocarbons in Vertical Cylindrical Storage Tanks by Hydrostatic Tank Gauging-First Edition

API MPMS 17.1
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 1 - Guidelines for Marine Cargo Inspection-Fourth Edition; Errata: June 2005

API MPMS 17.2
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 2 - Measurement of Cargoes on Board Tank Vessels-Second Edition; Errata: April 28, 2000

API MPMS 17.3
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 3 - Guidelines for Identification of the Source of Free Waters Associated with Marine Petroleum Cargo Movements-First Edition; Errata - 1992

API MPMS 17.4
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 4 - Method for Quantification of Small Volumes on Marine Vessels (OBQ/ROB)

API MPMS 17.5
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 5 - Guidelines for Cargo Analysis and Reconciliation of Cargo Quantities-Second Edition

API MPMS 17.6
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 6 - Guidelines for Determining the Fullness of Pipelines between Vessels and Shore Tanks-First Edition

API MPMS 17.7
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 7 - Recommended Practices for Developing Barge Control Factors (Volume Ratio)

API MPMS 17.8
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 8 - Guidelines for Pre-Loading Inspection of Marine Vessel Cargo Tanks-First Edition

API MPMS 17.9
Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 9Vessel Experience Factor (VEF) IP Hydrocarbon Management HM 49- First Edition

API MPMS 19.1
Manual of Petroleum Measurement Standards Chapter 19 - Evaporative Loss Measurement Section 1 - Evaporative Loss from Fixed-Roof Tanks-Third Edition

API MPMS 19.1D
Documentation File for API Manual of Petroleum Measurement Standards Chapter 19.1 - Evaporative Loss from Fixed Roof Tanks-First Edition; Erratum - 1994; API Bulletin 2518

API MPMS 19.2
Manual of Petroleum Measurement Standards Chapter 19 - Evaporative Loss Measurement Section 2 - Evaporative Loss from Floating-Roof Tanks- Second Edition; Formerly, API Publications 2517 and 2519

API MPMS 19.3 PART A
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part A - Wind Tunnel Test Method for the Measurement of Deck-Fitting Loss Factors for External Floating-Roof Tanks-First Edition

API MPMS 19.3 PART B
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part B - Air Concentration Test Method - Rim-Seal Loss Factors for Floating-Roof Tanks-First Edition

API MPMS 19.3 PART C
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part C - Weight Loss Test Method for the Measurement of Rim-Seal Loss Factors for Internal Floating-Roof Tanks-First Edition

API MPMS 19.3 PART D
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part D - Fugitive Emission Test Method for the Measurement of Deck- Seam Loss Factors for Internal Floating-Roof Tanks-First Edition

API MPMS 19.3 PART E
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part E - Weight Loss Test Method for the Measurement of Deck-Fitting Loss Factors for Internal Floating-Roof Tanks-First Edition

API MPMS 19.3 PART F
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part F - Evaporative Loss Factor for Storage Tanks Certification Program- First Edition

API MPMS 19.3 PART G
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part G - Certified Loss Factor Testing Laboratory Registration-First Edition

API MPMS 19.3 PART H
Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part H - Tank Seals and Fittings Certification - Administration-First Edition

API MPMS 19.4
Manual of Petroleum Measurement Standards Chapter 19.4 - Recommended Practice for Speciation of Evaporative Losses-Second Edition

API MPMS 2.2A
Manual of Petroleum Measurement Standard Chapter 2 - Tank Calibration Section 2A - Measurement and Calibration of Upright Cylindrical Tanks by the Manual Tank Strapping Method-First Edition

API MPMS 2.2B
Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2B - Calibration of Upright Cylindrical Tanks Using the Optical Reference Line Method-First Edition

API MPMS 2.2C
Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2C - Calibration of Upright Cylindrical Tanks Using the Optical- Triangulation Method-First Edition/ ISO 7507-3 Adoption

API MPMS 2.2D
Manual of Petroleum Measurement Standards Chapter 2 Tank Calibration Section 2D Calibration of Upright Cylindrical Tanks Using the Internal Electrooptical Distance Ranging Method-First Edition/ISO 7507-4 Adoption

API MPMS 2.2E
Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 1: Manual Methods-First Edition; ISO 12917-1 Adoption

API MPMS 2.2F
Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 2: Internal Electro-Optical Distance-Ranging Method-First Edition; ISO 12917-2 Adoption

API MPMS 2.7
Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 7 - Calibration of Barge Tanks-First Edition

API MPMS 2.8A
Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 8A - Calibration of Tanks on Ships and Oceangoing Barges-First Edition

API MPMS 21.1
Manual of Petroleum Measurement Standards Chapter 21 - Flow Measurement Using Electronic Metering Systems Section 1 - Electronic Gas Measurement

API MPMS 22.2
Manual of Petroleum Measurement Standards Chapter 22Testing Protocol Section 2Differential Pressure Flow Measurement Devices-First Edition; Replaces MPMS 5.7:2003

API MPMS 3.1A
Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1A - Standard Practice for the Manual Gauging of Petroleum and Petroleum Products-Second Edition

API MPMS 3.1B
Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1B - Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging-Second Edition

API MPMS 4.1
Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 1 - Introduction-Third Edition

API MPMS 4.4
Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 4 - Tank Provers-Second Edition

API MPMS 4.9.1
Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and 1Introduction to the Determination of the Volume of Displacement and Tank Provers-First Edition

API MPMS 4.9.2
Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and Volumetric Tank Provers Part 2Determination of the Volume of Displacement and Tank Provers by the Waterdraw Method of Calibration-First

API MPMS 5.1
Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 1 - General Considerations for Measurement by Meters-Fourth Edition

API MPMS 5.3
Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 3 - Measurement of Liquid Hydrocarbons by Turbine Meters-Fifth Edition

API MPMS 5.4
Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 4 - Accessory Equipment for Liquid Meters-Fourth Edition

API MPMS 5.5
Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 5 - Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems- Second Edition

API MPMS 5.6
Metering, Section 6 - Measurment of Liquid Hydrocarbons by Coriolis Meters-First Edition; Replaces API H00004 and API H00006

API MPMS 5.8
Manual of Petroluem Measurement Standards Chapter 5 - Metering - Section 8 - Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology-First Edition

API MPMS 6.2
Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 2 - Loading-Rack Metering Systems-Third Edition

API MPMS 6.4
Manual of Petroleum Measurement Standards Chapter 6 - Metering Section 4 - Metering Systems for Aviation Fueling Facilities-First Edition

API MPMS 6.5
Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 5 - Metering Systems for Loading and Unloading Marine Bulk Carriers- Second Edition

API MPMS 8.2
Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 2 - Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products-Second Edition; ASTM D4177

API MPMS 8.3
Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 3 - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products-First Edition; ASTM D5854

API MPMS 8.4
Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 4 - Standard Practice for Sampling and Handling of Fuels for Volatility Measurement- Second Edition

API MPMS 9.1
Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 1 - Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method-Second Edit

API MPMS 9.2
Manual of Petroleum Measurement Standards Chapter 9 - Determination Section 2 - Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer-Second Edition

API MPMS 9.3
Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 3 - Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method-Second Edition

API PUBL 1835
Study of Used Motor Oil Recycling in Eleven Selected Countries

API PUBL 2558
Wind Tunnel Testing of External Floating-Roof Storage Tanks

API STD 2554
Measurement and Calibration of Tank Cars-ASTM D1409



Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment

Post a Comment