Cheapest & Latest ASTM Standard (PDF) (A)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


AIIMASTM-BP-01-08 Portable Document Format-Healthcare (PDF) A Best Practices Guide
A1-00(2005) Standard Specification for Carbon Steel Tee Rails
A2-02(2008) Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
A3-01(2006) Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
A6/A6M-08a Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
A20/A20M-07 Standard Specification for General Requirements for Steel Plates for Pressure Vessels
A27/A27M-08 Standard Specification for Steel Castings, Carbon, for General Application
A29/A29M-05 Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
A31-04e1 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
A34/A34M-06 Standard Practice for Sampling and Procurement Testing of Magnetic Materials



1 A36/A36M-08 Standard Specification for Carbon Structural Steel
2,A36/A36M-08 Especificación Normalizada para Acero al Carbono Estructural
3,A47/A47M-99(2004) Standard Specification for Ferritic Malleable Iron Castings
4,A48/A48M-03(2008) Standard Specification for Gray Iron Castings
5,A49-01(2006) Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
6,A53/A53M-07 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
X 7,A53/A53M-07 Especificación Normalizada para Parrillas Electrosoldadas de Barras Corrugadas de Acero de Refuerzo para Concreto
8,A65-07 Standard Specification for Steel Track Spikes
9,A66-07 Standard Specification for Steel Screw Spikes
10,A67-00(2005) Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked
A74-09 Standard Specification for Cast Iron Soil Pipe and Fittings


1,A82/A82M-07 Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
2,A82/A82M-07 Especificación Normalizada para Alambre de Acero, Liso, para Refuerzo de Concreto
3,A90/A90M-07 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
4,A99-03 Standard Specification for Ferromanganese
5,A100-07 Standard Specification for Ferrosilicon
6,A101-04 Standard Specification for Ferrochromium
7,A102-04 Standard Specification for Ferrovanadium
8,A105/A105M-05 Standard Specification for Carbon Steel Forgings for Piping Applications
9,A106/A106M-08 Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service



1,A108-07 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
2,A109/A109M-08 Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
3,A111-99a(2004)e1 Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire
4,A116-05 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric
5,A121-07 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
6,A123/A123M-08 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
7,A125-96(2007) Standard Specification for Steel Springs, Helical, Heat-Treated
8,A126-04 Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
9,A128/A128M-93(2007) Standard Specification for Steel Castings, Austenitic Manganese



1,A131/A131M-08 Standard Specification for Structural Steel for Ships
2,A132-04 Standard Specification for Ferromolybdenum
3,A134-96(2005) Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
4,A135/A135M-06 Standard Specification for Electric-Resistance-Welded Steel Pipe
5,A139/A139M-04 Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
6,A143/A143M-07 Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
7,A144-04 Specification for Ferrotungsten
8,A146-04 Standard Specification for Molybdenum Oxide Products
9,A148/A148M-08 Standard Specification for Steel Castings, High Strength, for Structural Purposes


1,A153/A153M-05 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
2,A159-83(2006) Standard Specification for Automotive Gray Iron Castings
3,A167-99(2004) Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
4,A176-99(2004) Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
5,A178/A178M-02(2007) Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
6,A179/A179M-90a(2005) Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
7,A181/A181M-06 Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
8,A182/A182M-08a Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
9,A183-03 Standard Specification for Carbon Steel Track Bolts and Nuts


1,A184/A184M-06 Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement
2,A185/A185M-07 Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete Especificación Normalizada para Refuerzo Electrosoldado de Alambre de Acero Liso, para Concreto
3,A192/A192M-02(2007) Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
4,A193/A193M-08b Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications
5,A194/A194M-08b Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
6,A197/A197M-00(2006) Standard Specification for Cupola Malleable Iron
7,A203/A203M-97(2007)e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
8,A204/A204M-03(2007) Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
9,A209/A209M-03(2007) Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes


1,A210/A210M-02(2007) Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
2,A213/A213M-08a Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
3,A214/A214M-96(2005) Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
4,A216/A216M-08 Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
5,A217/A217M-08 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
6,A220/A220M-99(2004) Standard Specification for Pearlitic Malleable Iron
7,A225/A225M-03(2007) Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
8,A227/A227M-06 Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
9,A228/A228M-07 Standard Specification for Steel Wire, Music Spring Quality

1,A229/A229M-99(2005) Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs
2,A230/A230M-05 Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
3,A231/A231M-04 Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
4,A232/A232M-05 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
5,A234/A234M-07 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
6,A239-95(2004) Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
7,A240/A240M-08a Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
8,A242/A242M-04e1 Standard Specification for High-Strength Low-Alloy Structural Steel
9,A242/A242M-04 Especificacion Normalizada para Acero Estructural de Alta Resistencia y Baja Aleacion


1,A247-06 Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
2,A249/A249M-08 Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
3,A250/A250M-05 Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
4,A252-98(2007) Standard Specification for Welded and Seamless Steel Pipe Piles
5,A254-97(2007) Standard Specification for Copper-Brazed Steel Tubing
6,A255-07 Standard Test Methods for Determining Hardenability of Steel
7,A262-02a(2008) Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
8,A263-03 Standard Specification for Stainless Chromium Steel-Clad Plate
9,A264-03 Specification for Stainless Chromium-Nickel Steel-Clad Plate



1,A265-03 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
2,A266/A266M-03a(2008) Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
3,A268/A268M-05a Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
4,A269-08 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
5,A270-03a(2008)e1 Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
6,A275/A275M-08 Standard Practice for Magnetic Particle Examination of Steel Forgings
7,A276-08a Standard Specification for Stainless Steel Bars and Shapes
8,A278/A278M-01(2006) Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)
9,A283/A283M-03(2007) Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates



1,A285/A285M-03(2007) Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
2,A288-91(2008) Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
3,A289/A289M-97(2008) Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
4,A290/A290M-05 Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
5,A291/A291M-05 Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
6,A295/A295M-05 Standard Specification for High-Carbon Anti-Friction Bearing Steel
7,A297/A297M-08a Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
8,A299/A299M-04 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
9,A302/A302M-03(2007) Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel


1,A304-05e2 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
2,A307-07b Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
3,A307-07b Especificación Normalizada paraTornillos y Pernos de Acero al Carbono, con 60 000 PSI de Resistencia a la Traccion
4,A308/A308M-06 Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
5,A309-01(2007) Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
6,A311/A311M-04 Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
7,A312/A312M-08a Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
8,A313/A313M-08 Standard Specification for Stainless Steel Spring Wire
9,A314-08 Standard Specification for Stainless Steel Billets and Bars for Forging


1,A319-71(2006) Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts
2,A320/A320M-08 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service
3,A322-07 Standard Specification for Steel Bars, Alloy, Standard Grades
4,A323-05 Standard Specification for Ferroboron
5,A324-08 Standard Specification for Ferrotitanium
6,A325-09 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
7,A325M-09 Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]
8,A327-91(2006) Standard Test Methods for Impact Testing of Cast Irons
9,A327M-91(2006) Standard Test Methods for Impact Testing of Cast Irons (Metric)

1,A328/A328M-07 Standard Specification for Steel Sheet Piling
2,A333/A333M-05 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
3,A334/A334M-04a Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
4,A335/A335M-06 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
5,A336/A336M-08 Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
6,A338-84(2004) Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C)
7,A340-03a Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
8,A341/A341M-00(2005)e1 Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods
9,A342/A342M-04 Standard Test Methods for Permeability of Feebly Magnetic Materials


1,A343/A343M-03(2008) Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
2,A345-04 Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications
3,A348/A348M-05 Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
4,A350/A350M-07 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
5,A351/A351M-06 Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
6,A352/A352M-06 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
7,A353/A353M-04 Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered
8,A354-07a Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
9,A355-89(2006) Standard Specification for Steel Bars, Alloys, for Nitriding
A356/A356M-07 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines


1,A358/A358M-08a Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
A363-03 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
2,A367-60(2005) Standard Test Methods of Chill Testing of Cast Iron
3,A368-95a(2004) Standard Specification for Stainless Steel Wire Strand
4,A369/A369M-06 Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
5,A370-09 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
6,A372/A372M-03(2008) Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
7,A376/A376M-06 Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
8,A377-03(2008)e1 Standard Index of Specifications for Ductile-Iron Pressure Pipe
9,A380-06 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems


1,A381-96(2005) Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
2,A384/A384M-07 Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
3,A385-08 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
4,A387/A387M-06a Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
5,A388/A388M-08 Standard Practice for Ultrasonic Examination of Steel Forgings
6,A389/A389M-08 Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
7,A390-06 Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
8,A391/A391M-07 Standard Specification for Grade 80 Alloy Steel Chain
9,A392-07 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric


1,A394-08 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
2,A395/A395M-99(2004) Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
3,A400-69(2006) Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
4,A401/A401M-03 Standard Specification for Steel Wire, Chromium-Silicon Alloy
5,A403/A403M-07a Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
6,A407-07 Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
7,A409/A409M-08a Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
8,A411-08 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
9,A413/A413M-07 Standard Specification for Carbon Steel Chain


1,A414/A414M-07 Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels
2,A416/A416M-06 Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
3,A416M-06 Especificación Normalizada para Torón de Acero, de Siete Alambres Sin Recubrimiento para Concreto Preesforzado
4,A418/A418M-07 Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
5,A420/A420M-07 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
6,A421/A421M-05 Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
7,A421M-05 Especificación Normalizada para Alambre de Acero Aliviado de Esfuerzos sin Recubrimiento para Concreto Preesforzado
8,A423/A423M-95(2004) Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
9,A424-06 Standard Specification for Steel, Sheet, for Porcelain Enameling

1,A426/A426M-08 Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
2,A427-02(2007) Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
3,A428/A428M-06 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
4,A434-06 Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
5,A435/A435M-90(2007) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
6,A436-84(2006) Standard Specification for Austenitic Gray Iron Castings
7,A437/A437M-06 Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service
8,A439-83(2004) Standard Specification for Austenitic Ductile Iron Castings
9,A447/A447M-93(2007) Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service


1,A449-07b Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
2,A450/A450M-07 Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
3,A451/A451M-06 Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
4,A453/A453M-08 Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels
5,A455/A455M-03(2007) Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
6,A456/A456M-08 Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
7,A459-08 Standard Specification for Zinc-Coated Flat Steel Armoring Tape
8,A460-94(2004)e1 Standard Specification for Copper-Clad Steel Wire Strand
9,A463/A463M-06 Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process



1,A466/A466M-07 Standard Specification for Weldless Chain
2,A467/A467M-07 Standard Specification for Machine and Coil Chain
3,A469/A469M-07 Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors
4,A470/A470M-05e1 Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
5,A471-08 Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
6,A472/A472M-07 Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings
7,A473-01 Standard Specification for Stainless Steel Forgings
8,A474-03(2008) Standard Specification for Aluminum-Coated Steel Wire Strand
9,A475-03 Standard Specification for Zinc-Coated Steel Wire Strand



1,A476/A476M-00(2005) Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls
2,A478-97(2008) Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
3,A479/A479M-08 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
4,A480/A480M-08b Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
5,A481-05 Standard Specification for Chromium Metal
6,A482-05 Standard Specification for Ferrochrome-Silicon
7,A483-04 Standard Specification for Silicomanganese
8,A484/A484M-08 Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
9,A485-03 Standard Specification for High Hardenability Antifriction Bearing Steel


1,A487/A487M-93(2007) Standard Specification for Steel Castings Suitable for Pressure Service
2,A488/A488M-07 Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
3,A489-04e1 Standard Specification for Carbon Steel Lifting Eyes
4,A490-08b Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
5,A490M-08 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
6,A491-07 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
7,A492-95(2004) Standard Specification for Stainless Steel Rope Wire
8,A493-95(2004) Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
9,A494/A494M-08 Standard Specification for Castings, Nickel and Nickel Alloy


1,A495-06 Standard Specification for Calcium-Silicon Alloys
2,A496/A496M-07 Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement
3,A497/A497M-07 Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete
4,A498-06 Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
5,A499-89(2008) Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails
6,A500/A500M-07 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
7,A500/A500M-07 Carbono Conformados en Frío, Electrosoldados y sin Costura, de forma Circular y no Circular
8,A501-07 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
9,A501-07 Especificacion Normalizada para Tubos Estructurales de Acero al Carbono Conformados en Caliente, Electrosoldados y sin Costura

1,A502-03 Standard Specification for Rivets, Steel, Structural
2,A503/A503M-01(2006) Standard Specification for Ultrasonic Examination of Forged Crankshafts
3,A504/A504M-08 Standard Specification for Wrought Carbon Steel Wheels
4,A505-00(2005) Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
5,A506-05 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
6,A507-06 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
7,A508/A508M-05b Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
8,A510-08 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
9,A510M-08 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric]


1,A511/A511M-08 Standard Specification for Seamless Stainless Steel Mechanical Tubing
2,A512-06 Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
3,A513-08a Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
4,A514/A514M-05 Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
5,A515/A515M-03(2007) Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
6,A516/A516M-06 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
7,A517/A517M-06 Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
8,A518/A518M-99(2008) Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
9,A519-06 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing

1,A521/A521M-06 Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
2,A522/A522M-07 Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
3,A523-96(2005) Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
4,A524-96(2005) Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
5,A529/A529M-05 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
6,A530/A530M-04a Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
7,A531/A531M-91(2006) Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
8,A532/A532M-93a(2008) Standard Specification for Abrasion-Resistant Cast Irons
9,A533/A533M-93(2004)e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel



1,A534-04 Standard Specification for Carburizing Steels for Anti-Friction Bearings
2,A536-84(2004)e1 Standard Specification for Ductile Iron Castings
3,A537/A537M-08 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
4,A540/A540M-06 Standard Specification for Alloy-Steel Bolting Materials for Special Applications
5,A541/A541M-05 Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
6,A542/A542M-99(2004)e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
7,A543/A543M-93(2004)e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
8,A550-06 Standard Specification for Ferrocolumbium
9,A551/A551M-08 Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications

1,A553/A553M-06 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel
2,A554-08a Standard Specification for Welded Stainless Steel Mechanical Tubing
3,A555/A555M-05 Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
4,A556/A556M-96(2005) Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
5,A560/A560M-05 Standard Specification for Castings, Chromium-Nickel Alloy
6,A561-08 Standard Practice for Macroetch Testing of Tool Steel Bars
7,A562/A562M-06 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
8,A563-07a Standard Specification for Carbons and Alloy Steel Nuts
9,A563M-07 Standard Specification for Carbon and Alloy Steel Nuts [Metric]


1,A564/A564M-04 Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
2,A565/A565M-05a Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
3,A568/A568M-07a Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
4,A571/A571M-01(2006) Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
5,A572/A572M-07 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
6,A572/A572M-07 Especificación Normalizada para Acero Estructural de Alta Resistencia de Baja Aleación de Columbio-Vanadio
7,A573/A573M-05 Standard Specification for Structural Carbon Steel Plates of Improved Toughness
8,A574-08 Standard Specification for Alloy Steel Socket-Head Cap Screws
9,A574M-08 Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]


A575-96(2007) Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
A576-90b(2006) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
A577/A577M-90(2007) Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
A578/A578M-07 Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
A579/A579M-04a Standard Specification for Superstrength Alloy Steel Forgings
A580/A580M-08 Standard Specification for Stainless Steel Wire
A581/A581M-95b(2004) Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
A582/A582M-05 Standard Specification for Free-Machining Stainless Steel Bars
A586-04a Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand

A587-96(2005) Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
A588/A588M-05 Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
A588M-05 Especificación Normalizada para Acero Estructural de Alta Resistencia y Baja Aleaci ón, con Punto Mínimo de Fluencia de hasta 50 ksi [345 MPa], con Resistencia a la Corrosi ón Atmosférica
A589/A589M-06 Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
A592/A592M-04 Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels
A595/A595M-06 Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
A596/A596M-95(2004)e1 Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
A597-87(2004) Standard Specification for Cast Tool Steel
A598/A598M-02(2007) Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores

A599/A599M-07 Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
A600-92a(2004) Standard Specification for Tool Steel High Speed
A601-05 Standard Specification for Electrolytic Manganese Metal
A602-94(2004) Standard Specification for Automotive Malleable Iron Castings
A603-98(2003) Standard Specification for Zinc-Coated Steel Structural Wire Rope
A604/A604M-07 Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
A606-04 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
A608/A608M-06 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperature
A609/A609M-91(2007) Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof


A610-79(2004) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
A612/A612M-03(2007) Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
A615/A615M-08b Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
A615/A615M-08b Especificación Normalizada para Barras de Acero al Carbono Lisas y Corrugadas para Refuerzo de Concreto
A618/A618M-04 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
A623-08 Standard Specification for Tin Mill Products, General Requirements
A623M-08 Standard Specification for Tin Mill Products, General Requirements [Metric]
A624/A624M-03(2008)e1 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
A625/A625M-08 Standard Specification for Tin Mill Products, Black Plate, Single-Reduced


A626/A626M-03(2008)e1 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
A627-03 Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
A630-03 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
A632-04 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
A633/A633M-01(2006) Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
A635/A635M-08 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
A636-08 Standard Specification for Nickel Oxide Sinter
A638/A638M-00(2004) Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
A640-97(2002)e1 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable


A641/A641M-09 Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
A644-05 Standard Terminology Relating to Iron Castings
A645/A645M-05 Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
A646/A646M-06 Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
A648-04a Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe
A649/A649M-08 Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
A650/A650M-03(2008) Standard Specification for Tin Mill Products, Black Plate, Double Reduced
A653/A653M-08 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A656/A656M-05e2 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability

A657/A657M-03(2008)e1 Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
A659/A659M-08 Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
A660-96(2005) Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
A662/A662M-03(2007) Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A663/A663M-89(2006) tandard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
A664-06e1 Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
A666-03 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
A667/A667M-87(2008) Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
A668/A668M-04 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use


A671-06 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures


A672-08 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
A673/A673M-07 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
A674-05 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
A675/A675M-03e1 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
A677-07 Standard Specification for Nonoriented Electrical Steel Fully Processed Types
A678/A678M-05 Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates
A679/A679M-06 Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
A681-08 Standard Specification for Tool Steels Alloy
A682/A682M-05 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For


A683-05e1 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
A684/A684M-08 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
A686-92(2004) Standard Specification for Tool Steel, Carbon
A688/A688M-08 Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
A689-97(2007)e1 Standard Specification for Carbon and Alloy Steel Bars for Springs
A690/A690M-07 Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
A691-98(2007) Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
A693-06 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A694/A694M-08 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
A696-90a(2006) Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
A697/A697M-03(2008) Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
A698/A698M-07 Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
A700-05 Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment
A701-05 Standard Specification for Ferromanganese-Silicon
A702-89(2006) Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought
A703/A703M-08a Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
A704/A704M-06 Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
A705/A705M-95(2004) Standard Specification for Age-Hardening Stainless Steel Forgings
A706/A706M-08a Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
A706/A706M-08a Especificación Normalizada para Barras de Acero de Baja Aleación Lisas y Corrugadas para Refuerzo de Concreto
A707/A707M-02(2007) Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
A709/A709M-08 Standard Specification for Structural Steel for Bridges
A710/A710M-02(2007) Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
A711/A711M-07 Standard Specification for Steel Forging Stock
A712-07 Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys
A713-04 Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
A714-99(2003) Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
A716-08 Standard Specification for Ductile Iron Culvert Pipe
A717/A717M-06 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
A719/A719M-02(2007) Standard Test Method for Lamination Factor of Magnetic Materials
A720/A720M-02(2007) Standard Test Method for Ductility of Nonoriented Electrical Steel
A721/A721M-02(2007) Standard Test Method for Ductility of Oriented Electrical Steel
A722/A722M-07 Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete
A722/A722M-07 Especificación Normalizada para Barras de Acero de Alta Resistencia sin Recubrimiento para Concreto Preesforzado
A723/A723M-08 Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
A724/A724M-04 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels
A726-05 Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types
A727/A727M-02(2007) Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
A729/A729M-06 Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
A732/A732M-05 Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
A733-03 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
A734/A734M-87a(2007) Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered
A735/A735M-03(2007) Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service
A736/A736M-03(2007) Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel
A737/A737M-99(2004) Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
A738/A738M-07 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A739-90a(2006) Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
A740-98(2008) Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
A741-98(2003) Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail
A742/A742M-03(2008) Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
A743/A743M-06 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
A744/A744M-06 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
A745/A745M-94(2003) Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
A746-03 Standard Specification for Ductile Iron Gravity Sewer Pipe
A747/A747M-07 Standard Specification for Steel Castings, Stainless, Precipitation Hardening
A748/A748M-87(2008) Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
A749/A749M-08 Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
A751-08 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
A752-04 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
A752M-04 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]
A753-08 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
A754/A754M-08 Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
A755/A755M-03(2008) Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
A756-94(2001) Standard Specification for Stainless Anti-Friction Bearing Steel
A757/A757M-00(2004) Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
A758/A758M-00(2005) Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
A759-00(2005) Standard Specification for Carbon Steel Crane Rails
A760/A760M-06 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
A761/A761M-04 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
A762/A762M-08 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
A763-93(2004) Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
A764-07 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
A765/A765M-07 Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
A767/A767M-05 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
A767/A767M-05 Especificación Normalizada para Barras de Acero Cincadas (Galvanizadas) para Refuerzo de Concreto
A768/A768M-05 Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
A769/A769M-05 Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes
A770/A770M-03(2007) Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
A772/A772M-00(2005) Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current
A773/A773M-01 Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
A774/A774M-06 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
A775/A775M-07b Standard Specification for Epoxy-Coated Steel Reinforcing Bars
A775/A775M-07b Especificación Normalizada para Barras de Acero de Refuerzo Recubiertas con Epoxi
A778-01 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
A779/A779M-05 Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete
A780-01(2006) Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
A781/A781M-08 Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A782/A782M-06 Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel
A786/A786M-05 Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
A787-05 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
A788/A788M-08a Standard Specification for Steel Forgings, General Requirements
A789/A789M-08b Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
A790/A790M-08a Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
A792/A792M-08 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
A793-96(2001) Standard Specification for Rolled Floor Plate, Stainless Steel
A794-06 Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled
A795/A795M-08 Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
A796/A796M-06 Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
A798/A798M-07 Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
A799/A799M-04 Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
A800/A800M-01(2006) Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof
A801-04 Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)
A802/A802M-95(2006) Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
A803/A803M-08 Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes
A804/A804M-04 Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens
A805-08 Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
A807/A807M-02(2008) Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
A809-08 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
A810-01(2008) Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
A811-03(2008) Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques
A813/A813M-07 Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
A814/A814M-08 Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
A815/A815M-08b Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
A817-07 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
A818-06 Standard Specification for Coppered Carbon Steel Wire
A820/A820M-06 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
A821/A821M-05 Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Tanks
A822/A822M-04 Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
A823-99(2008) Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
A824-01(2007) Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
A827/A827M-02(2007) Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications
A829/A829M-06 Standard Specification for Alloy Structural Steel Plates
A830/A830M-06 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
A832/A832M-06 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
A833-08a Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
A834-95(2006) Standard Specification for Common Requirements for Iron Castings for General Industrial Use
A835/A835M-84(2005) Standard Specification for Sizes of Ferroalloys and Alloy Additives
A836/A836M-02(2007) Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
A837/A837M-06 Standard Specification for Steel Forgings, Alloy, for Carburizing Applications
A838-02(2007) Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications
A839-02(2008) Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications
A840-06 Standard Specification for Fully Processed Magnetic Lamination Steel
A841/A841M-03a(2007) Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
A842-85(2004) Standard Specification for Compacted Graphite Iron Castings
A844/A844M-04 Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
A847/A847M-05 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
A848-01(2006) Standard Specification for Low-Carbon Magnetic Iron
A849-00(2005) Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
A852/A852M-03(2007) Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick
A853-04 Standard Specification for Steel Wire, Carbon, for General Use
A854/A854M-08 Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
A855/A855M-03 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
A856/A856M-03 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
A857/A857M-07 Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage
A858/A858M-07 Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
A859/A859M-04 Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
A860/A860M-08 Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings
A861-04(2008) Standard Specification for High-Silicon Iron Pipe and Fittings
A862/A862M-98(2008) Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
A865/A865M-06 Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
A866-01 Standard Specification for Medium Carbon Anti-Friction Bearing Steel
A867-03(2008) Standard Specification for Iron-Silicon Relay Steels
A871/A871M-03(2007) Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
A872/A872M-07a Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
A874/A874M-98(2004) Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
A875/A875M-06 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
A876-03 Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
A877/A877M-05 Standard Specification for Steel Wire, Chromium-Silicon Alloy Valve Spring Quality
A878/A878M-05 Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
A879/A879M-06 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A881/A881M-05 Standard Specification for Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties
A882/A882M-04a Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
A884/A884M-06 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
A884M-06 Especificación Normalizada para Alambre y Refuerzo Electrosoldado de Alambre de Acero Recubierto con Epoxi
A886/A886M-05 Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
A887-89(2004) Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
A888-09 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
A889/A889M-03(2008) Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame
A890/A890M-99(2007) Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
A891/A891M-08 Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
A892-06 Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
A893/A893M-03(2008) Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
A894/A894M-00(2005) Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials
A895-89(2004) Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
A896-89(2004) Standard Practice for Conducting Case Studies on Galvanized Structures
A897/A897M-06 Standard Specification for Austempered Ductile Iron Castings
A898/A898M-07 Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
A899-91(2007) Standard Specification for Steel Wire, Epoxy-Coated
A900/A900M-01(2006) Standard Test Method for Lamination Factor of Amorphous Magnetic Strip
A901-03(2008) Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
A902-08a Standard Terminology Relating to Metallic Coated Steel Products
A903/A903M-99(2007) Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
A904-04 Standard Specification for 50 Nickel-50 Iron Powder Metallurgy (P/M) Soft Magnetic Parts
A905-04 Standard Specification for Steel Wire, Pressure Vessel Winding
A906/A906M-02 Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
A908-03(2008)e1 Standard Specification for Stainless Steel Needle Tubing
A909/A909M-06 Standard Specification for Steel Forgings, Microalloy, for General Industrial Use
A910/A910M-05 Standard Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete
A911/A911M-05 Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties
A912/A912M-04 Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
A913/A913M-07 Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
A914/A914M-92(2005) Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
A915/A915M-08 Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
A917-08 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
A918-06 Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A920/A920M-07 Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
A921/A921M-93(2005) Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
A922-05 Standard Specification for Silicon Metal
A923-08 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
A924/A924M-08a Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A925-03 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
A926-03(2008) Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
A927/A927M-04 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
A928/A928M-08a Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
A929/A929M-01(2007) Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A930-03 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
A931-08 Standard Test Method for Tension Testing of Wire Ropes and Strand
A932/A932M-01(2006) Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
A933/A933M-07 Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement
A934/A934M-07 Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
A934-07 Especificación Normalizada para Barras de Acero de Refuerzo Prefabricadas Recubiertas con Epoxi
A937/A937M-06 Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
A938-07 Standard Test Method for Torsion Testing of Wire
A939-07 Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
A940/A940M-06 Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
A941-06a Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
A942-95(2007) Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells
A943/A943M-01(2005) Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
A944-05 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
A945/A945M-06e1 Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
A946-95(2004) Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service
A947M-95(2004) Standard Specification for Textured Stainless Steel Sheet [Metric]
A949/A949M-01(2005) Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
A950/A950M-99(2007) Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
A951/A951M-06 Standard Specification for Steel Wire for Masonry Joint Reinforcement
A952/A952M-02 Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
A955/A955M-07a Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
A956-06 Standard Test Method for Leeb Hardness Testing of Steel Products
A957/A957M-09 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A958-00(2006) Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
A959-07 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
A960/A960M-08a Standard Specification for Common Requirements for Wrought Steel Piping Fittings
A961/A961M-08a Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
A962/A962M-07b Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range
A964/A964M-03 Standard Specification for Corrugated Steel Box Culverts
A965/A965M-06a Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
A966/A966M-08 Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current
A967-05e1 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
A968/A968M-96(2001) Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service
A970/A970M-07 Standard Specification for Headed Steel Bars for Concrete Reinforcement
A971/A971M-05 Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
A972/A972M-00(2004) Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
A973/A973M-07 Standard Specification for Grade 100 Alloy Steel Chain
A974-97(2003) Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
A975-97(2003) Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
A976-03(2008) Standard Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application
A977/A977M-07 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
A978/A978M-08 Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
A979/A979M-03 Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
A980-97(2003) Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
A981-97(2007) Standard Test Method for Evaluating Bond Strength for 15.2 mm (0.6 in.) Diameter Prestressing Steel Strand, Grade 270, Uncoated, Used in Prestressed Ground Anchors
A982/A982M-05 Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
A983/A983M-06 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
A984/A984M-03 Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded
A985/A985M-08 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
A986/A986M-01(2006) Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
A987-07 Standard Practice for Measuring Shape Characteristics of Tin Mill Products
A988/A988M-07 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
A989/A989M-07 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
A990-08 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
A991/A991M-08 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
A992/A992M-06a Standard Specification for Structural Steel Shapes
A992M-06a Especificación Normalizada para Perfiles de Acero Estructural
A994-05 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
A995/A995M-98(2007) Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
A996/A996M-06a Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
A996/A996M-06a Especificación Normalizada para Barras Corrugadas de Acero de Riel y de Acero de Eje para Refuerzo de Concreto
A997-08 Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
A998/A998M-08 Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications
A999/A999M-04a Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
A1000-05 Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
A1001-01(2006) Standard Specification for High Strength Steel Castings in Heavy Sections
A1002-99(2003) Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
A1003/A1003M-08 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
A1004/A1004M-99(2004) Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
A1005/A1005M-00(2004) Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded
A1006/A1006M-00(2004) Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded
A1007-07 Standard Specification for Carbon Steel Wire for Wire Rope
A1008/A1008M-08a Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
A1009-05 Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications
A1010/A1010M-01e1 Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip
A1011/A1011M-08 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
A1012-02(2007) Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
A1013-00(2005) Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method
A1014/A1014M-06 Standard Specification for Precipitation-Hardening Bolting Material (UNS N07718) for High Temperature Service
A1015-01(2005) Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
A1016/A1016M-08 Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
A1017/A1017M-07 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
A1018/A1018M-08a Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
A1019/A1019M-01(2007) Standard Specification for Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, Polymer Precoated for Sewers and Drains
A1020/A1020M-02(2007) Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications
A1021/A1021M-05 Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service
A1022/A1022M-07 Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
A1023/A1023M-07 Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes
A1024/A1024M-02(2007) Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless
A1025-05 Standard Specification for Ferroalloys, General Requirements
A1028-03 Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils
A1030/A1030M-05 Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products
A1031-05 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
A1032-04 Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe
A1033-04 Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
A1034/A1034M-05b Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
A1035/A1035M-07 Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
A1036-04 Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers
A1037/A1037M-05 Standard Specification for Steel Line Pipe, Black, Furnace-butt-Welded
A1038-08 Standard Practice for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
A1039/A1039M-04 Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial and Structural, Produced by the Twin-Roll Casting Process
A1040-07 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
A1041/A1041M-04 Standard Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten
A1042/A1042M-04 Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains
A1043/A1043M-05 Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
A1044/A1044M-05 Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
A1045-08 Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Water Closets to Sanitary Drainage System
A1046/A1046M-06 Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
A1047/A1047M-05 Standard Test Method for Pneumatic Leak Testing of Tubing
A1048/A1048M-06 Standard Specification for Pressure Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service
A1049/A1049M-06 Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
A1053/A1053M-06 Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe
A1054-07 Standard Specification for Sintered Ceramic Ferrite Permanent Magnets
A1055/A1055M-08a Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
A1056-08 Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings
A1057/A1057M-08 Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
A1058-08 Standard Test Methods for Mechanical Testing of Steel Products—Metric
A1059/A1059M-08 Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products



Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm