2009/09/07

Cheapest & Latest BSI Standard (PDF) (20)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


BS EN 60684-3-271:2004 BS EN 60684-3-271:2004. Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable elastomer sleeving, flame retarted, fluid resistant, shrink ratio 2:1
BS EN 60684-3-228:2004 BS EN 60684-3-228:2004. Flexible insulating sleeving. Specification requirements for individual types of sleeving. Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1
BS EN 60684-3-216:2005 BS EN 60684-3-216:2005. Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable, flame-retarded, limited-fire hazard sleeving
BS EN 2703:2005 BS EN 2703:2005. Aluminium alloy AL-P2024-T4 or T42. Clad sheet and strip. 0,3 mm ≤ a ≤ 6 mm
BS EN 2002-2:2005 BS EN 2002-2:2005. Aerospace series. Metallic materials. Test methods. Tensile testing at elevated temperature
BS EN 10335:2005 BS EN 10335:2005. Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption. Non alloyed electrolytic chromium/chromium oxide coated steel
BS EN 10334:2005 BS EN 10334:2005. Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption. Non-coated steel (blackplate)
BS EN 10333:2005 BS EN 10333:2005. Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption. Tin coated steel (tinplate)
BS EN 50363-10-2:2005 BS EN 50363-10-2:2005. Insulating, sheathing and covering materials for low-voltage energy cables. Miscellaneous sheathing compounds. Thermoplastic polyurethane
BS EN 50363-10-1:2005 BS EN 50363-10-1:2005. Insulating, sheathing and covering materials for low-voltage energy cables. Miscellaneous sheathing compounds. Cross-linked polyvinyl chloride (XLPVC)
BS EN 50363-9-1:2005 BS EN 50363-9-1:2005. Insulating, sheathing and covering materials for low-voltage energy cables. Miscellaneous insulating compounds. Cross-linked polyvinyl chloride (XLPVC)
BS EN 50363-8:2005 BS EN 50363-8:2005. Insulating, sheathing and covering materials for low voltage energy cables. Halogen-free, thermoplastic sheathing compounds
06/30065340 DC 06/30065340 DC. ISO 7849. Acoustics. Determination of airborne sound power levels emitted by machinery using vibration measurement. Part 1. Survey method using a fixed radiation faxtor
BS EN 50363-7:2005 BS EN 50363-7:2005. Insulating, sheathing and covering materials for low voltage energy cables. Halogen-free, thermoplastic insulating compounds
BS EN 50363-6:2005 BS EN 50363-6:2005. Insulating, sheathing and covering materials for low-voltage energy cables. Halogen-free, cross-linked sheathing compounds
BS EN 50363-5:2005 BS EN 50363-5:2005. Insulating, sheathing and covering materials for low voltage energy cables. Halogen-free, cross-linked insulating compounds
BS EN 50363-4-2:2005 BS EN 50363-4-2:2005. Insulating, sheathing and covering materials for low voltage energy cables. PVC covering compounds
BS EN 50363-4-1:2005 BS EN 50363-4-1:2005. Insulating, sheathing and covering materials for low voltage energy cables. PVC sheathing compounds
BS EN 50363-3:2005 BS EN 50363-3:2005. Insulating, sheathing and covering materials for low voltage energy cables. PVC insulating compounds
BS EN 50363-2-2:2005 BS EN 50363-2-2:2005. Insulating, sheathing and covering materials for low voltage energy cables. Cross-linked elastomeric covering compounds
BS EN 50363-2-1:2005 BS EN 50363-2-1:2005. Insulating, sheathing and covering materials for low-voltage energy cables. Cross-linked elastomeric sheathing compounds
BS EN 50363-1:2005 BS EN 50363-1:2005. Insulating, sheathing and covering materials for low voltage energy cables. Cross-linked elastomeric insulating compounds
BS EN 50363-0:2005 BS EN 50363-0:2005. Insulating, sheathing and covering materials for low voltage energy cables. General introduction
BS EN 62226-1:2005 BS EN 62226-1:2005. Exposure to electric or magnetic fields in the low and intermediate frequency range. Methods for calculating the current density and internal electric field induced in the human body. General
BS ISO 20022-2:2004 BS ISO 20022-2:2004. Financial services. UNIversal Financial Industry message scheme. Roles and responsibilities of the registration bodies
BS EN 14225-2:2005 BS EN 14225-2:2005. Diving suits. Dry suits. Requirements and test methods
BS EN 14225-1:2005 BS EN 14225-1:2005. Diving suits. Wet suits. Requirements and test methods
BS EN 10219-2:2006 BS EN 10219-2:2006. Cold formed welded structural hollow sections of non-alloy and fine grain steels. Tolerances, dimensions and sectional properties
BS EN 10219-1:2006 BS EN 10219-1:2006. Cold formed welded structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements
BS ISO 687:2004 BS ISO 687:2004. Solid mineral fuels. Coke. Determination of moisture in the general analysis test sample
BS EN ISO 3107:2004 BS EN ISO 3107:2004. Dentistry. Zinc oxide/eugenol and zinc oxide/non-eugenol cements
BS EN 60512-25-7:2005 BS EN 60512-25-7:2005. Connectors for electronic equipment. Tests and measurements. Test 25g. Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
BS ISO 16269-8:2004 BS ISO 16269-8:2004. Statistical interpretation of data. Determination of prediction intervals
DD CEN/TS 764-6:2004 DD CEN/TS 764-6:2004. Pressure equipment. Structure and content of operating instructions
BS ISO 16067-2:2004 BS ISO 16067-2:2004. Photography. Electronic scanners for photographic images. Spatial resolution measurements. Film scanners
BS ISO 16833:2006 BS ISO 16833:2006. Road vehicles. Wheels. Measurement of radial and lateral run-out
BS EN 14339:2005 BS EN 14339:2005. Underground fire hydrants
BS ISO 10185:2004 BS ISO 10185:2004. Tobacco and tobacco products. Vocabulary
ISO21727 : 2004 EDTN1 ISO21727 : 2004 EDTN1. ISO21727 : 2004 Cinematography - Method of measurement of perceived loudness of motion-picture audio material
BS EN 926-2:2005 BS EN 926-2:2005. Paragliding equipment. Paragliders. Requirements and test methods for classifying flight safety characteristics
BS EN 14333-3:2004 BS EN 14333-3:2004. Non-fatty foods. Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim). HPLC method with liquid/liquid-partition clean up
BS EN 14333-2:2004 BS EN 14333-2:2004. Non fatty foods. Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim). HPLC method with gel permeation chromatography clean up
BS EN 14333-1:2004 BS EN 14333-1:2004. Non fatty foods. Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim). HPLC method with solid phase extraction clean up
BS 6002-3:2005 BS 6002-3:2005. Sampling procedures for inspection by variables. Guide to double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
BS EN 14344:2004 BS EN 14344:2004. Child use and care articles. Child seats for cycles. Safety requirements and test methods
BS EN 14350-1:2004 BS EN 14350-1:2004. Child use and care articles. Drinking equipment. General and mechanical requirements and tests
05/30064424 DC 05/30064424 DC. ISO 10846-5. Acoustics and vibration. Laboratory measurement of vibro- acoustic transfer properties of resilient elements. Part 5. Low frequency dynamic stiffness of elastic supports for translatory motion (Driving point method)
BS EN 14350-2:2004 BS EN 14350-2:2004. Child use and care articles. Drinking equipment. Chemical requirements and test methods
BS EN ISO 7539-7:2005 BS EN ISO 7539-7:2005. Corrosion of metals and alloys. Stress corrosion testing. Method for slow strain rate testing
BS EN 14348:2005 BS EN 14348:2005. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants in the medical area including instrument disinfectants. Test methods and requirements (phase 2, step 1)
BS ISO/IEC 15946-4:2004 BS ISO/IEC 15946-4:2004. Information technology. Security techniques. Cryptographic techniques based on elliptic curves. Digital signatures giving message recovery
BS 7801:2004 BS 7801:2004. Escalators and moving walks. Code of practice for safe working on escalators and moving walks
BS EN 14179-1:2005 BS EN 14179-1:2005. Glass in building. Heat-soaked thermally-toughened soda lime silicate safety glass. Definition and description
BS EN 14337:2005 BS EN 14337:2005. Heating systems in buildings. Design and installation of direct electrical room heating systems
BS EN 14328:2005 BS EN 14328:2005. Protective clothing. Gloves and armguards protecting against cuts by powered knives. Requirements and test methods
BS EN 14334:2005 BS EN 14334:2005. Inspection and testing of LPG road tankers
BS EN 14321-2:2005 BS EN 14321-2:2005. Glass in building. Thermally toughened alkaline earth silicate safety glass. Evaluation of conformity/Product standard
BS EN 14321-1:2005 BS EN 14321-1:2005. Glass in building. Thermally toughened alkaline earth silicate safety glass. Definition and description
BS EN 14178-1:2004 BS EN 14178-1:2004. Glass in building. Basic alkaline earth silicate glass. Float glass
BS EN 847-3:2004 BS EN 847-3:2004. Tools for woodworking. Safety requirements . Clamping devices
ISO17874-2 : 2004 (R08) EDTN1 ISO17874-2 : 2004 (R08) EDTN1. ISO17874-2 : 2004 Remote-handling devices for radioactive materials -. Part 2: Mechanical master-slave manipulators
BS EN 14615:2005 BS EN 14615:2005. Postal services. Digital postage marks. Applications, security and design
DD CEN/TS 1071-10:2004 DD CEN/TS 1071-10:2004. Advanced technical ceramics. Methods of test for ceramic coatings. Determination of coating thickness by cross section
BS ISO 17514:2004 BS ISO 17514:2004. Time-measuring instruments. Photoluminescent deposits. Test methods and requirements
BS EN 12015:2004 BS EN 12015:2004. Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Emission
DD ISO/TS 19979:2004 DD ISO/TS 19979:2004. Ophthalmic optics. Contact lenses. Hygienic management of multipatient use trial contact lenses
BS EN 81-73:2005 BS EN 81-73:2005. Safety rules for the construction and installation of lifts. Particular applications for passenger and goods passenger lifts. Behaviour of lifts in the event of fire
BS EN ISO 9342-1:2005 BS EN ISO 9342-1:2005. Optics and optical instruments. Test lenses for calibration of focimeters. Test lenses for focimeters used for measuring spectacle lenses
BS EN 450-2:2005 BS EN 450-2:2005. Fly ash for concrete. Conformity evaluation
BS EN 10323:2004 BS EN 10323:2004. Steel wire and products. Bead wire
BS ISO 18894:2006 BS ISO 18894:2006. Coke. Determination of coke reactivity index (CRI) and coke strength after reaction (CSR)
BS EN 13286-51:2004 BS EN 13286-51:2004. Unbound and hydraulically bound mixtures. Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction
BS EN 13286-50:2004 BS EN 13286-50:2004. Unbound and hydraulically bound mixtures. Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction
BS EN 14888:2005 BS EN 14888:2005. Fertilizers and liming materials. Determination of cadmium content
BS EN 13286-48:2005 BS EN 13286-48:2005. Unbound and hydraulically bound mixtures. Test method for the determination of degree of pulverisation
BS EN 2696:2005 BS EN 2696:2005. Aerospace series. Aluminium alloy AL-P7075-T6 or T62. Sheet and strip. 0,4 mm ≤a ≤6 mm
BS EN 2695:2005 BS EN 2695:2005. Aerospace series. Aluminium alloy AL-P6081-T6. Sheet and strip. 0,3 mm ≤a ≤6 mm
BS EN 2511:2005 BS EN 2511:2005. Aluminium alloy AL-P7075-T7351. Plate. 6 mm < a ≤ 100 mm
BS EN 2694:2005 BS EN 2694:2005. Aerospace series. Aluminium alloy AL-P6061-T6 or T62. Sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 2693:2005 BS EN 2693:2005. Aerospace series. Aluminium alloy AL-P5086-H111. Sheet and strip. 0,3 mm ≤a ≤6 mm
BS EN 2422:2005 BS EN 2422:2005. Aluminium alloy AL-P2124-T351. Plate. 25 mm < a ≤ 120 mm
BS EN 2395:2005 BS EN 2395:2005. Aerospace series. Aluminium alloy AL-P2014A-T4 or T42. Sheet and strip. 0,4 mm ≤a ≤6 mm
BS EN 2092:2005 BS EN 2092:2005. Aerospace series. Aluminium alloy AL-P7075-T6 or T62. Clad sheet and strip. 0,4 mm ≤a ≤6 mm
BS EN 2090:2005 BS EN 2090:2005. Aluminium alloy AL-P2024-T3. Clad sheet and strip. 0,3 mm ≤ a ≤ 6 mm
BS EN 2089:2005 BS EN 2089:2005. Aluminium alloy AL-P2014A T6 or T62. Sheet and strip. 0,4 mm ≤ a ≤ 6 mm
ISO21069-1 : 2004 (R08) EDTN1 ISO21069-1 : 2004 (R08) EDTN1. ISO21069-1 : 2004 Road vehicles - Test of braking systems on vehicles with a permissible mass 0f over 3,5 t using a roller brake tester. Part 1: Air braking systems
BS EN 2088:2005 BS EN 2088:2005. Aerospace series. Aluminium alloy AL-P2014A. T4 or T42. Clad sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 54-17:2005 BS EN 54-17:2005. Fire detection and fire alarm systems. Short-circuit isolators
BS EN ISO 7886-3:2005 BS EN ISO 7886-3:2005. Sterile hypodermic syringes for single use. Auto-disable syringes for fixed dose immunization
ISO/IEC14496-13 : 2004 EDTN 1 ISO/IEC14496-13 : 2004 EDTN 1. ISO/IEC14496-13 : 2004 Coding of audio-visual objects . Part 13 : Intellectual Property Management and Protection (IPMP) extensions
BS EN 13084-7:2005 BS EN 13084-7:2005. Free-standing chimneys. Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners.
BS EN ISO 15848-1:2006 BS EN ISO 15848-1:2006. Industrial valves. Measurement, test and qualification procedures for fugitive emissions. Classification system and qualification procedures for type testing of valves
BS ISO 446:2004 BS ISO 446:2004. Micrographics. ISO character and ISO test chart No 1. Description and use
ISO11659-3 : 2004 EDTN 1 ISO11659-3 : 2004 EDTN 1. ISO11659-3 : 2004 Textile machinery and accessories - Machine parts in contact with textile processing oils . Part 3: Determination of the impact on lacquers
ISO11659-2 : 2004 EDTN 1 ISO11659-2 : 2004 EDTN 1. ISO11659-2 : 2004 Textile machinery and accessories - Machine parts in contact with textile processing oils . Part 2: Determination of the impact on polymeric materials
BS EN 12101-10:2005 BS EN 12101-10:2005. Smoke and heat control systems. Power supplies
BS EN ISO 11904-2:2004 BS EN ISO 11904-2:2004. Acoustics. Determination of sound immission from sound sources placed close to the ear. Technique using a manikin
BS EN 9133:2004 BS EN 9133:2004. Aerospace series. Quality management systems. Qualification procedure for aerospace standard parts
BS EN 14296:2005 BS EN 14296:2005. Sanitary appliances. Communal washing troughs
BS EN 60099-4:2004 BS EN 60099-4:2004. Surge arresters. Metal-oxide surge arresters without gaps for a.c. systems
PD ISO/IEC TR 9294:2005 PD ISO/IEC TR 9294:2005. Information technology. Guidelines for the management of software documentation
ISO8895 : 2004 EDTN2 ISO8895 : 2004 EDTN2 . ISO8895 : 2004 Shaped insulating refractory products - Determination of cold crushing strength
PD 6682-5:2005 PD 6682-5:2005. Aggregates. Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications. Guidance on the use of BS EN 13055-2
BS ISO 15736:2006 BS ISO 15736:2006. Ships and marine technology. Pyrotechnic life-saving appliances. Testing, inspection and marking of production units
BS EN 12900:2005 BS EN 12900:2005. Refrigerant compressors. Rating conditions, tolerances and presentation of manufacturer's performance data
BS EN ISO 11341:2004, BS 3900-F14:2004 BS EN ISO 11341:2004, BS 3900-F14:2004. Paints and varnishes. Artificial weathering and exposure to artificial radiation. Exposure to filtered xenon-arc radiation
ISO11372 : 2005 EDTN2 ISO11372 : 2005 EDTN2. ISO11372 : 2005 Cylinders for dissolved acetylene - Inspection at time of filling
ISO10461 : 2005 EDTN 2 ISO10461 : 2005 EDTN 2. ISO10461 : 2005 Gas cylinders - Seamless aluminium-alloy gas cylinders - Periodic inspection and testing
ISO10460 : 2005 EDTN2 ISO10460 : 2005 EDTN2. ISO10460 : 2005 Gas cylinders - Welded carbon steel gas cylinders - Periodic inspection and testing
ISO6406 : 2005 EDTN2 ISO6406 : 2005 EDTN2. ISO6406 : 2005 Gas cylinders - Seamless steel gas cylinders - Periodic inspection and testing
BS EN ISO 20685:2005 BS EN ISO 20685:2005. 3-D scanning methodologies for internationally compatible anthropomteric databases
BS EN 230:2005 BS EN 230:2005. Automatic burner control systems for oil burners
BS EN 60789:2005 BS EN 60789:2005. Medical electrical equipment. Characteristics and test conditions of radionuclide imaging devices. Anger type gamma cameras
BS EN 12098-5:2005 BS EN 12098-5:2005. Controls for heating systems. Start-stop schedulers for heating systems
BS ISO 14004:2004 BS ISO 14004:2004. Environmental management systems. General guidelines on principles, systems and supporting techniques
BS EN ISO 14001:2004 BS EN ISO 14001:2004. Environmental management systems. Requirements with guidance for use
BS EN 13609-1:2005 BS EN 13609-1:2005. Health informatics. Messages for maintenance of supporting information in healthcare systems. Updating of coding schemes
PD ISO/IEC TR 18044:2004 PD ISO/IEC TR 18044:2004. Information technology. Security techniques. Information security incident management
BS EN 572-9:2004 BS EN 572-9:2004. Glass in building. Basic soda lime silicate glass products. Evaluation of conformity/Product standard
PD ISO/TR 11146-3:2004 PD ISO/TR 11146-3:2004. Lasers and laser-related equipment. Test methods for laser beam widths, divergence angles and beam propagation ratios. Intrinsic and geometrical laser beam classification, propagation and details of test methods
BS EN ISO 11146-2:2005 BS EN ISO 11146-2:2005. Lasers and laser-related equipment. Test methods for laser beam widths, divergence angles and beam propagation ratios. General astigmatic beams
BS EN ISO 11146-1:2005 BS EN ISO 11146-1:2005. Lasers and laser-related equipment. Test methods for laser beam widths, divergence angles and beam propagation ratios. Stigmatic and simple astigmatic beams
BS EN 61300-2-42:2005 BS EN 61300-2-42:2005. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Static side load for connectors
BS EN 14298:2004 BS EN 14298:2004. Sawn timber. Assessment of drying quality
BS EN 10088-1:2005 BS EN 10088-1:2005. Stainless steels. List of stainless steels
BS EN 14361:2004 BS EN 14361:2004. Aluminium and aluminium alloys. Chemical analysis. Sampling from metal melts
BS EN 10088-3:2005 BS EN 10088-3:2005. Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
BS EN 10088-2:2005 BS EN 10088-2:2005. Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
BS ISO 7251:2005 BS ISO 7251:2005. Microbiology of food and animal feeding stuffs. Horizontal method for the detection and enumeration of presumptive Escherichia coli. Most probable number technique
BS ISO 8217:2005 BS ISO 8217:2005. Petroleum products. Fuels (class F). Specifications of marine fuels
BS ISO 8216-1:2005 BS ISO 8216-1:2005. Petroleum products. Fuels (class F). Classification. Categories of marine fuels
BS EN ISO 20200:2005 BS EN ISO 20200:2005. Plastics. Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
DD IEC/TS 61967-3:2005 DD IEC/TS 61967-3:2005. Integrated circuits. Measurement of electromagnetic emissions, 150 kHzto 1 GHz. Measurement of radiated emissions. Surface scan method
ISO16124 : 2004 EDTN1 ISO16124 : 2004 EDTN1. ISO16124 : 2004 Steel wire rod - Dimensions and tolerances
BS EN 60749-21:2005 BS EN 60749-21:2005. Semiconductor devices. Mechanical and climatic test methods. Solderability
04/30061005 DC 04/30061005 DC. ISO 17769. Liquid pumps. General terms and installation. Definitions, quantities, letter symbols and units
BS EN 14297:2004 BS EN 14297:2004. Chimneys. Freeze-thaw resistance test method for chimney products
PD IEC/TR 60071-4:2004 PD IEC/TR 60071-4:2004. Insulation co-ordination. Computational guide to insulation co-ordination and modelling of electrical networks
DD IEC TS 62282-1:2005 DD IEC TS 62282-1:2005. Fuel cell technologies. Terminology
BS ISO 10766:2006 BS ISO 10766:2006. Hydraulic fluid power. Cylinders. Housing dimensions forrectangular-sect bearing rings for pistons and rods
BS 8475:2006 BS 8475:2006. Instrumental colour measurement of textiles. Method
BS EN ISO 4934:2003 BS EN ISO 4934:2003. Steel and iron. Determination of sulfur content. Gravimetric method
BS EN ISO 22774:2004 BS EN ISO 22774:2004. Footwear. Test methods for accessories. Shoe laces. Abrasion resistance
BS EN 14279:2004 BS EN 14279:2004. Laminated veneer lumber (LVL). Definitions, classification and specifications
BS EN ISO 22775:2004 BS EN ISO 22775:2004. Footwear. Test methods for accessories. Metallic accessories. Corrosion resistance
BS EN ISO 22776:2004 BS EN ISO 22776:2004. Footwear. Test method for accessories. Touch and close fasteners. Shear strength before and after repeated closing
BS EN ISO 22777:2004 BS EN ISO 22777:2004. Footwear. Test method for accessories: touch and close fasteners. Peel strenght before and after repeated closingst method for accessories. Touch and close fasteners. Peel strength before and after repeated closing
BS EN 1504-5:2004 BS EN 1504-5:2004. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Concrete injection
BS EN ISO 22478:2006 BS EN ISO 22478:2006. Water quality. Determination of certain explosives and related compounds. Method using high-performance liquid chromatography (HPLC) with UV detection
PD CEN/TR 15126:2005 PD CEN/TR 15126:2005. Characterization of sludges. Good practice for land filling of sludgesan d sludge treatment residues
BS EN 60601-1-6:2004 BS EN 60601-1-6:2004. Medical electrical equipment. General requirements for safety. Collateral standard. Usability
BS ISO 18436-2:2003 BS ISO 18436-2:2003. Condition monitoring and diagnostics of machines. Requirements for training and certification of personnel. Vibration condition monitoring and diagnostics
BS ISO 18436-1:2004 BS ISO 18436-1:2004. Condition monitoring and diagnostics of machines. Requirements for training and certification of personnel. General requirements for certifying bodies and the certification process
BS EN 10210-1:2006 BS EN 10210-1:2006. Hot finished structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements
DD ISO/TS 19127:2005 DD ISO/TS 19127:2005. Geographic information. Geodetic codes and parameters
BS ISO 14892:2002 BS ISO 14892:2002. Dried skimmed milk. Determination of vitamin D content using high-performance liquid chromatography
BS EN 413-2:2005 BS EN 413-2:2005. Masonry cement. Test methods
BS EN 1860-4:2004 BS EN 1860-4:2004. Appliances, solid fuels and firelighters for barbecueing. Single use barbecues burning solid fuels. Requirements and test methods
BS ISO 6743-3:2003 BS ISO 6743-3:2003. Lubricants, industrial oils and related products (class L). Classification. Family D (Compressors)
BS EN 50107-2:2005 BS EN 50107-2:2005. Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV. Requirements for earth-leakage and open-circuit protective devices
BS ISO 17058:2004 BS ISO 17058:2004. Steel and iron. Determination of arsenic content. Spectrophotometric method
BS EN 14251:2003 BS EN 14251:2003. Structural round timber. Test methods
BS EN 14250:2004 BS EN 14250:2004. Timber structures. Product requirements for prefabricated structural members assembled with punched metal plate fasteners
BS EN 13157:2004 BS EN 13157:2004. Cranes. Safety. Hand powered lifting equipment
BS EN 13852-2:2004 BS EN 13852-2:2004. Cranes. Offshore cranes. Floating cranes
BS EN 13000:2004 BS EN 13000:2004. Cranes. Mobile cranes
BS EN 14198:2004 BS EN 14198:2004. Railway applications. Braking. Requirements for the brake systems of trains hauled by a locomotive
BS EN 14502-1:2005 BS EN 14502-1:2005. Cranes. Equipment for lifting persons. Suspended baskets
BS ISO 4148:2004 BS ISO 4148:2004. Road vehicles. Special warning lamps. Dimensions
BS EN 12274-8:2005 BS EN 12274-8:2005. Slurry surfacing. Test methods. Visual assessment of defects
BS EN 14268:2005 BS EN 14268:2005. Irrigation techniques. Meters for irrigation water
BS EN 14238:2004 BS EN 14238:2004. Cranes. Manually controlled load manipulating devices
BS EN ISO 17662:2005 BS EN ISO 17662:2005. Welding. Calibration, verification and validation of equipment used for welding, including ancillary activities
BS EN 14278-1:2004 BS EN 14278-1:2004. Textiles. Determination of cotton fibre stickiness. Method using a manual theromodetection device
BS EN ISO 10308:2006 BS EN ISO 10308:2006. Metallic coatings. Review of porosity tests
BS ISO 13528:2005 BS ISO 13528:2005. Statistical methods for use in proficiency testing by interlaboratory comparisons
BS 6465-1:2006 BS 6465-1:2006. Sanitary installations. Code of practice for the design of sanitary facilities and scales of provision of sanitary and associated appliances
BS EN 61300-2-47:2004 BS EN 61300-2-47:2004. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Thermal shocks
DD ISO/TS 21749:2005 DD ISO/TS 21749:2005. Measurement and uncertainty for metrological applications. Repeated measurements and nested experiments
BS 5852:2006 BS 5852:2006. Methods of test for assessment of the ignitability of upholstered seating by smouldering and flaming ignition sources
BS EN 771-6:2005 BS EN 771-6:2005. Specification for masonry units. Natural stone masonry units
BS ISO 16269-6:2005 BS ISO 16269-6:2005. Statistical interpretation of data. Determination of statistical tolerance intervals
BS EN ISO 22374:2005 BS EN ISO 22374:2005. Dentistry. Dental handpieces. Electrical-powered scalers and scaler tips
BS EN 14242:2004 BS EN 14242:2004. Aluminium and aluminium alloys. Chemical analysis. Inductively coupled plasma optical emission spectral analysis
DD ISO/TS 16649-3:2005 DD ISO/TS 16649-3:2005. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of $GB-glucuronidase positive Escherichia coli. Most probable number technique using 5-bromo-4-chloro-3-indoyl-β-D-glucuronide
BS EN 1929-3:2005 BS EN 1929-3:2005. Basket trolleys. Requirements and tests for basket trolleys with additional goods carrying facility(ies), with or without a child carrying facility
BS EN 1929-7:2005 BS EN 1929-7:2005. Basket trolleys. Requirements and tests for basket trolleys with baby and child carrying facilities
BS EN 1929-4:2005 BS EN 1929-4:2005. Basket trolleys. Requirements and tests for basket trolleys with additional goods carrying facility(ies), with or without a child carrying facility, intended to be used on passenger conveyors
BS EN ISO 15927-5:2004 BS EN ISO 15927-5:2004. Hygrothermal performance of buildings. Calculation and presentation of climatic data. Data for design heat load for space heating
BS EN 60519-10:2005 BS EN 60519-10:2005. Safety in electroheat installations. Particular requirements for electrical resistance trace heating systems for industrial and commercial applications
PD ISO/TR 22971:2005 PD ISO/TR 22971:2005. Accuracy (trueness and precision) of measurement methods and results. Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
DD CEN ISO/TS 17574:2004 DD CEN ISO/TS 17574:2004. Road transport and traffic telematics. Electronic fee collection (EFC). Guidelines for EFC security protection profiles
ISO16844-5 : 2004 EDTN1 ISO16844-5 : 2004 EDTN1. ISO16844-5 : 2004 Road vehicles - Tachograph systems -. Part 5:Secured CAN interface
ISO16844-4 : 2004 EDTN 1 ISO16844-4 : 2004 EDTN 1. ISO16844-4 : 2004 Road vehicles - Tachograph systems. Part 4: CAN interface
ISO16844-3 : 2004 EDTN1 ISO16844-3 : 2004 EDTN1. ISO16844-3 : 2004 Road vehicles - Tachograph systems. Part 3: Motion sensor interface
BS EN 61215:2005 BS EN 61215:2005. Crystalline silicon terrestrial photovoltaic (PV) modules. Design qualification and type approval
BS EN 61784-1:2004 BS EN 61784-1:2004. Digital data communications for measurement and control. Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems
PD CLC/TR 61158-1:2004 PD CLC/TR 61158-1:2004. Digital data communications for measurement and control. Fieldbus for use in industrial control systems. Overview and guidance for the IEC 61158 series
BS ISO 21287:2004 BS ISO 21287:2004. Pneumatic fluid power. Cylinders. Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm
ISO/IEC14496-3 : 2005 EDTN 3 ISO/IEC14496-3 : 2005 EDTN 3. ISO/IEC14496-3 : 2006 Information technology - Coding of audio-visual objects. Part 3: Audio
ISO/IEC21000-4 : 2006 EDTN1 ISO/IEC21000-4 : 2006 EDTN1. ISO/IEC21000-4 : 2006 Information technology - Multimedia Framework (MPEG-21). Part 4: Intellectual Property Management and Protection (IPMP)
BS EN 12502-4:2004 BS EN 12502-4:2004. Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. Influencing factors for stainless steels
BS EN 12502-3:2004 BS EN 12502-3:2004. Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. Influencing factors for hot dip galvanised ferrous materials
BS EN 12502-2:2004 BS EN 12502-2:2004. Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. Influencing factors for copper and copper alloys
BS EN 12502-1:2004 BS EN 12502-1:2004. Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. General
BS ISO 14728-2:2004 BS ISO 14728-2:2004. Rolling bearings. Linear motion rolling bearings. Static load ratings
BS ISO 14728-1:2004 BS ISO 14728-1:2004. Rolling bearings. Linear motion rolling bearings. Dynamic load ratings and rating life
BS EN 1052-5:2005 BS EN 1052-5:2005. Methods of test for masonry. Determination of bond strength by the bond wrench method
BS ISO 19018:2004 BS ISO 19018:2004. Ships and marine technology. Terms, abbreviations, graphical symbols and concepts on navigation
BS 8204-5:2004 BS 8204-5:2004. Screeds, bases and in situ floorings. Mastic asphalt underlays and wearing surfaces. Code of practice
BS 8204-4:2004 BS 8204-4:2004. Screeds, bases and in situ floorings. Cementitious terrazo wearing surfaces. Code of practice
BS 8204-3:2004 BS 8204-3:2004. Screeds, bases and in situ floorings. Polymer modified cementitious levelling screeds and wearing screeds. Code of practice
BS EN 820-3:2004 BS EN 820-3:2004. Advanced technical ceramics. Monolithic ceramics. Thermomechanical properties. Determination of resistance to thermal shock by water quenching
DD 8431:2005 DD 8431:2005. Electrical static meters for secondary metering and sub-metering. Specification
BS EN 61108-4:2004 BS EN 61108-4:2004. Marine navigation and radiocommunication equipment and systems. Global navigation satellite systems (GNSS). Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment. Performance requirements, methods of testing and required test results
BS EN ISO 7500-1:2004 BS EN ISO 7500-1:2004. Metallic materials. Verification of static uniaxial testing machines. Tension/compression testing machines. Verification and calibration of the force-measuring system
ISO15228 : 2005 EDTN1 ISO15228 : 2005 EDTN1. ISO15228 : 2005 Textile machinery and accessories - Profile reeds for air jet weaving machines - Dimensions
BS ISO 19238:2004 BS ISO 19238:2004. Radiation protection. Performance criteria for service laboratories performing biological dosimetry by cytogenetics
BS EN 62258-1:2005 BS EN 62258-1:2005. Semiconductor die products. Requirements for procurement and use
05/30055722 DC 05/30055722 DC. EN 13402-4. Size designation system for clothes. Part 4. Coding system
BS ISO 17386:2004 BS ISO 17386:2004. Transport information and control systems. Manoeuvring aids for low speed operation (MALSO). Performance requirements and test procedures
BS EN 61300-3-37:2005 BS EN 61300-3-37:2005. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Endface angle of angle- polished optical fibres
BS EN 13402-3:2004 BS EN 13402-3:2004. Size designation of clothes. Measurements and intervals
BS EN 14223:2005 BS EN 14223:2005. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of water absorption
ISO/IEC11179-5 : 2005 EDTN2 ISO/IEC11179-5 : 2005 EDTN2. ISO/IEC11179-5 : 2005 Information technology -- Metadata Registries (MDR). Part 5: Naming and identification principles
BS EN 14682:2004 BS EN 14682:2004. Safety of children's clothing. Cords and drawstrings on children's clothing. Specifications
BS EN 60747-16-10:2004 BS EN 60747-16-10:2004. Semiconductor devices. Technology Approval Schedule (TAS) for monolithic microwave integrated circuits
PD CEN/TR 15019:2005 PD CEN/TR 15019:2005. Geotextiles and geotextile-related products. On-site quality control
BS ISO 15859-8:2004 BS ISO 15859-8:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methods. Kerosine propellant
BS ISO 15859-7:2004 BS ISO 15859-7:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methods. Hydrazine propellant
BS ISO 15859-6:2004 BS ISO 15859-6:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methods. Monomethylhydrazine propellant
BS ISO 15859-3:2004 BS ISO 15859-3:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methods. Nitrogen
BS ISO 15859-1:2004 BS ISO 15859-1:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methods. Oxygen
BS EN ISO 18778:2005 BS EN ISO 18778:2005. Respiratory equipment. Infant monitors. Particular requirements
BS EN ISO 18779:2005 BS EN ISO 18779:2005. Medical devices for conserving oxygen and oxygen mixtures. Particular requirements
BS ISO 12231:2005 BS ISO 12231:2005. Photography. Electronic still picture imaging. Vocabulary
BS EN 14225-4:2005 BS EN 14225-4:2005. Diving suits. One atmosphere suits (ADS). Human factors requirements and test methods
BS EN 14225-3:2005 BS EN 14225-3:2005. Diving suits. Actively heated or cooled suits (systems). Requirements and test methods
BS ISO 8528-1:2005 BS ISO 8528-1:2005. Reciprocating internal combustion engine driven alternating current generating sets. Application, ratings and performance
BS EN 9200:2004 BS EN 9200:2004. Programme management. Guidelines for project management specification
PD CLC/TR 50373:2004 PD CLC/TR 50373:2004. Wind turbines. Electromagnetic compatibility
BS 7121-14:2005 BS 7121-14:2005. Code of practice for safe use of cranes. Side boom pipelayers
BS ISO 19922:2005 BS ISO 19922:2005. Ships and marine technology. Fire resistance of metallic pipe components with resilient and elastomeric seals. Requirements on the test bench
BS ISO 19921:2005 BS ISO 19921:2005. Ships and marine technology. Fire resistance of metallic pipe components with resilient and elastomeric seals. Test methods
DD CLC/TS 62046:2005 DD CLC/TS 62046:2005. Safety of machinery. Application of protective equipment to detect the presence of persons
BS 7121-5:2006 BS 7121-5:2006. Code of practice for safe use of cranes. Tower cranes
ISO3951-2 : 2006 EDTN1 ISO3951-2 : 2006 EDTN1. ISO3951-2 : 2006 Sampling procedures for inspection by variables. Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
BS 6002-4:2006, ISO 3951-5:2006 BS 6002-4:2006, ISO 3951-5:2006. Sampling procedures for inspection by variables. Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
BS EN 14178-2:2004 BS EN 14178-2:2004. Glass in building. Basic alkaline earth silicate glass products. Evaluation of conformity/Product standard
BS EN 1748-2-2:2004 BS EN 1748-2-2:2004. Glass in building. Special basic products. Glass ceramics. Evaluation of conformity/Product standard
BS EN 1748-1-2:2004 BS EN 1748-1-2:2004. Glass in building. Special basic products. Borosilicate glasses. Evaluation of conformity. Product standard
BS EN 12274-7:2005 BS EN 12274-7:2005. Slurry surfacing. Test methods. Shaking abrasion test
BS IEC 61000-6-6:2003 BS IEC 61000-6-6:2003. Electromagnetic compatibility (EMC). Generic standards. HEMP immunity for indoor equipment
BS ISO 15686-7:2006 BS ISO 15686-7:2006. Buildings and constructed assets. Service life planning. Performance evaluation for feedback of service life data from practice
BS EN ISO 1514:2004, BS 3900-A3:2004 BS EN ISO 1514:2004, BS 3900-A3:2004. Paints and varnishes. Standard panels for testing
BS EN 14181:2004 BS EN 14181:2004. Stationary source emissions. Quality assurance of automated measuring systems
BS EN 14199:2005 BS EN 14199:2005. Execution of special geotechnical works. Micropiles
PD ISO/TR 14999-1:2005 PD ISO/TR 14999-1:2005. Optics and photonics. Interferometric measurement of optical elements and optical systems. Terms, definitions and fundamental relationships
BS ISO 18913:2003 BS ISO 18913:2003. Imaging materials. Permanence. Vocabulary
BS EN 13757-3:2004 BS EN 13757-3:2004. Communications systems for and remote reading of meters. Dedicated application layer
BS EN 13757-2:2004 BS EN 13757-2:2004. Communication systems for remote reading of meters. Physical and link layer
BS EN ISO 16135:2006 BS EN ISO 16135:2006. Industrial valves. Ball valves of thermoplastic materials
ISO9712 : 2005 EDTN3 ISO9712 : 2005 EDTN3. ISO9712 : 2005 Non-destructive testing - Qualification and certification of personnel
BS EN ISO 21787:2006 BS EN ISO 21787:2006. Industrial valves. Globe valves of thermoplastics materials
BS EN ISO 16138:2006 BS EN ISO 16138:2006. Industrial valves. Diaphragm valves of thermoplastics materials
BS EN ISO 16137:2006 BS EN ISO 16137:2006. Industrial valves. Check valves of thermoplastic materials
BS EN ISO 16136:2006 BS EN ISO 16136:2006. Industrial valves. Butterfly valves of thermoplastic materials
BS EN 14610:2004 BS EN 14610:2004. Welding and allied processes. Definitions of metal welding processes
BS EN 4165-014:2005 BS EN 4165-014:2005. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous. Shielded accessory body, 2 and 4 modules for connectors, series 2 and series 3. Product standard
BS EN 4165-012:2005 BS EN 4165-012:2005. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous. Flange mounting receptacle 2 or 4 modules, series 3. Product standard
BS EN ISO 3071:2006 BS EN ISO 3071:2006. Textiles. Determination of pH of aqueous extract
BS EN 4165-015:2005 BS EN 4165-015:2005. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous. Round chimney for accessory (1 per module cavity). Product standard
BS EN 4165-022:2005 BS EN 4165-022:2005. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Insertion/extraction tool for removal of modules. Product standard
ISO17643 : 2005 EDTN1 ISO17643 : 2005 EDTN1. ISO17643 : 2005 Non-destructive testing of welds - Eddy current testing of welds by complex-plane analysis
BS EN 4165-013:2005 BS EN 4165-013:2005. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Cable clamp 2 and 4 modules for connectors, series 2 and series 3. Product standard
BS EN 4165-016:2005 BS EN 4165-016:2005. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Double oval chimney for accessory (1 per 2 modules). Product standard
BS EN 4165-017:2005 BS EN 4165-017:2005. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Blank chimney for accessory (1 per module cavity). Product standard
BS EN ISO 22612:2005 BS EN ISO 22612:2005. Clothing for protection against infectious agents. Test method for resistance to dry microbial penetration
BS EN 9132:2006 BS EN 9132:2006. Aerospace series. Quality management systems. Data matrix quality requirements for parts marking
PD IEC/TR 61000-1-4: 2005 PD IEC/TR 61000-1-4: 2005. Electromagnetic compatibility (EMC). General. Historical rationale for the limitation of power-frequency conducted harmonic current emmissions from equipment, in the frequency range up to 2 kHz
BS 5906:2005 BS 5906:2005. Waste management in buildings. Code of practice
DD CEN/TS 14429:2005 DD CEN/TS 14429:2005. Characterization of waste. Leaching behaviour tests. Influence of pH on leaching with initial acid/base addition
BS EN 60335-2-105:2005 BS EN 60335-2-105:2005. Specification for safety of household and similar electrical appliances. Particular requirements for multifunctional shower cabinets
BS EN 62093:2005 BS EN 62093:2005. Balance-of-system components for photovoltaic systems. Design qualification natural environments
BS EN 14157:2004 BS EN 14157:2004. Natural stones. Determination of abrasion resistance
BS EN 14212:2005 BS EN 14212:2005. Ambient air quality. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
BS EN 14211:2005 BS EN 14211:2005. Ambient air quality. Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence
BS EN 1504-8:2004 BS EN 1504-8:2004. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Quality control and evaluation of conformity
BS EN ISO 10297:2006 BS EN ISO 10297:2006. Transportable gas cylinders. Cylinder valves. Specification and type testing
BS EN ISO 407:2004 BS EN ISO 407:2004. Small medical gas cylinders. Pin-index yoke-type valve connections
BS EN 1089-3:2004 BS EN 1089-3:2004. Transportable gas cylinders. Gas cylinder identification (excluding LPG). Colour coding
BS EN 1648-2:2005 BS EN 1648-2:2005. Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations. Motor caravans
BS EN 1648-1:2004 BS EN 1648-1:2004. Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations. Caravans
BS EN 722-1:2004 BS EN 722-1:2004. Leisure accommodation vehicles. Liquid fuel heating systems. Caravans and caravan holiday homes
BS EN 721:2004 BS EN 721:2004. Leisure accommodation vehicles. Safety ventilation requirements
BS EN 14437:2004 BS EN 14437:2004. Determination of the uplift resistance of clay or concrete tiles for roofing. Roof system test method
ISO15673 : 2005 EDTN1 ISO15673 : 2005 EDTN1. ISO15673 : 2005 Guidelines for the simplified design of structural reinforced concrete for buildings
BS EN 14782:2006 BS EN 14782:2006. Self-supporting metal sheet for roofing, external cladding and internal lining. Product specification and requirements
BS EN 539-1:2005 BS EN 539-1:2005. Clay roofing tiles for discontinuous laying. Determination of physical characteristics. Impermeability test
BS EN 1304:2005 BS EN 1304:2005. Clay roofing tiles and fittings. Product definitions and specifications
BS EN 60641-2:2004 BS EN 60641-2:2004. Pressboard and presspaper for electrical purposes. Methods of tests
ISO5000 : 2005 EDTN3 ISO5000 : 2005 EDTN3. ISO5000 : 2005 Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
BS EN 1997-1:2004 BS EN 1997-1:2004. Eurocode 7. Geotechnical design. General rules
BS EN 1992-1-2:2004 BS EN 1992-1-2:2004. Eurocode 2. Design of concrete structures. General rules. Structural fire design
BS EN 14784-2:2005 BS EN 14784-2:2005. Non-destructive testing. Industrial computed radiography with storage phosphor imaging plates. General principles for testing of metallic materials using X-rays and gamma rays
BS EN 14784-1:2005 BS EN 14784-1:2005. Non-destructive testing. Industrial computed radiography with storage phosphor imaging plates. Classification of systems
BS EN ISO 21007-2:2005 BS EN ISO 21007-2:2005. Gas cylinders. Identification and marking using radio frequency identification technology. Numbering schemes for radio frequency identification
BS EN ISO 21007-1:2005 BS EN ISO 21007-1:2005. Gas cylinders. Identification and marking using radio frequency identification technology. Reference architecture and terminology
BS EN 60143-1:2004 BS EN 60143-1:2004. Series capacitors for power systems. General
BS EN ISO 4263-1:2004 BS EN ISO 4263-1:2004. Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST test. Procedure for mineral oils
BS EN 1996-3:2006 BS EN 1996-3:2006. Eurocode 6. Design of masonry structures. Simplified calculation methods for unreinforced masonry structures
BS EN 14820:2004 BS EN 14820:2004. Single-use containers for human venous blood specimen collection
BS ISO 18878:2004 BS ISO 18878:2004. Mobile elevating work platforms. Operator (driver) training
BS EN 60034-11:2004 BS EN 60034-11:2004. Rotating electrical machines. Thermal protection
ISO17123-5 : 2005 EDTN1 ISO17123-5 : 2005 EDTN1. ISO17123-5 : 2005 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments. Part 5: Electronic tacheometers
BS EN ISO 1968:2004 BS EN ISO 1968:2004. Fibre ropes and cordage. Vocabulary
BS 1139-6:2005 BS 1139-6:2005. Metal scaffolding. Specification for prefabricated tower scaffolds outside the scope of BS EN 1004, but utilizing components from such systems
BS ISO 2596:2006 BS ISO 2596:2006. Iron ores. Determination of hygroscopic moisture in analytical samples. Gravimetric, Karl Fischer and mass-loss methods
BS EN 14190:2005 BS EN 14190:2005. Gypsum plasterboard products from reprocessing. Definitions, requirements and test methods
BS EN 14188-1:2004 BS EN 14188-1:2004. Joint fillers and sealants. Specifications for hot applied sealants
BS EN ISO 7730:2005 BS EN ISO 7730:2005. Ergonomics of the thermal environment. Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
BS EN 62115:2005 BS EN 62115:2005. Electric toys. Safety
BS EN 62270:2004 BS EN 62270:2004. Hydroelectric power plant automation. Guide for computer-based control
BS EN 13617-3:2004 BS EN 13617-3:2004. Petrol filling stations. Safety requirements for constuction and performance of shear valves
BS EN 1504-3:2005 BS EN 1504-3:2005. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Structural and non-structural repair
BS EN 3475-513:2005 BS EN 3475-513:2005. Aerospace series. Cables, electrical, aircraft use. Test methods. Deformation resistance (installation with plastic cable ties)
BS EN 3475-416:2005 BS EN 3475-416:2005. Aerospace series. Cables, electrical, aircraft use. Test methods. Thermal stability
BS EN 3475-415:2005 BS EN 3475-415:2005. Aerospace series. Cables, electrical, aircraft use. Test methods. Rapid change of temperature
BS EN 3475-307:2005 BS EN 3475-307:2005. Cables, electrical, aircraft use. Test methods. Corona extinction voltage
BS EN 3475-306:2005 BS EN 3475-306:2005. Aerospace series. Cables, electrical, aircraft use. Test methods. Continuity of conductors
BS EN 3373-013:2005 BS EN 3373-013:2005. Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. In-line splices, insulated and moisture resistant, for crimping on copper conductors, temperature up to 260°C. Product standard
BS EN 3373-012:2005 BS EN 3373-012:2005. Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 150°C. Product standard
BS EN 14513:2005 BS EN 14513:2005. Transportable gas cylinders. Bursting disc pressure relief devices (excluding acetylene gas cylinders)
BS 8440-2:2005 BS 8440-2:2005. Health informatics. Medical digital imaging. Profiles format. Particular requirements for metadata profiles
BS 8440-1:2005 BS 8440-1:2005. Health informatics. Medical digital imaging. Profiles format. General principles
BS ISO 8096:2005 BS ISO 8096:2005. Rubber- or plastics-coated fabrics for water resistant clothing. Specification
BS ISO 13041-6:2005 BS ISO 13041-6:2005. Test conditions for numerically controlled turning machines and turning centres. Accuracy of a finished test piece
BS ISO 8254-3:2004 BS ISO 8254-3:2004. Paper and board. Measurement of specular gloss. 20 degree gloss with a converging beam, TAPPI method
ISO20279 : 2005 EDTN1 ISO20279 : 2005 EDTN1. ISO20279 : 2005 Soil quality - Extraction of thallium and determination by electrothermal atomic absorption spectrometry
BS EN 60747-16-4:2004 BS EN 60747-16-4:2004. Discrete semiconductor devices. Microwave integrated circuits. Switches
BS EN 61340-4-4:2005 BS EN 61340-4-4:2005. Electrostatics. Standard test methods for specific applications. Electrostatic classification of flexible intermediate bulk containers (FIBC)
PD 6461-4:2004 PD 6461-4:2004. General metrology. Practical guide to measurement uncertainty
BS ISO 2561:2006 BS ISO 2561:2006. Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BS EN 10108:2004 BS EN 10108:2004. Round steel rod for cold heading and cold extrusion. Dimensions and tolerances
BS EN 10017:2004 BS EN 10017:2004. Steel rod for drawing and/or cold rolling. Dimensions and tolerances
BS 5911-6:2004 BS 5911-6:2004. Concrete pipes, and ancillary concrete products. Specification for road gullies and gully cover slabs
04/30044581 DC 04/30044581 DC. EN 12566-5. Small wastewater treatment systems up to 50 PT. Part 5. Pre-treated effluent filtration systems
BS EN 295-10:2005 BS EN 295-10:2005. Vitrified clay pipes and fittings and pipe joints for drains and sewers. Performance requirements
PD CEN/TR 14920:2005 PD CEN/TR 14920:2005. Jetting resistance of drain and sewer pipes. Moving jet test method
BS EN 60255-22-1:2005 BS EN 60255-22-1:2005. Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. 1 MHz burst immunity tests
ISO22803 : 2004 (r08) EDTN1 ISO22803 : 2004 (r08) EDTN1 . ISO22803 : 2004 dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - contents of a technical file
BS EN 10184:2006 BS EN 10184:2006. Chemical analysis of ferrous materials. Determination of phosphorus in non-alloyed steels and irons. Molybdenum blue spectrophotometric method
BS ISO 10110-10:2004 BS ISO 10110-10:2004. Optics and photonics. Preparation of drawings for optical elements and systems. Table representing data of optical elements and cemented assemblies
BS EN 61076-7-001:2004 BS EN 61076-7-001:2004. Connectors for electronic equipment. Cable outlet accessories. Blank detail specification
BS EN ISO 20127:2005 BS EN ISO 20127:2005. Dentistry. Powered toothbrushes. General requirements and test methods
BS EN ISO 20126:2005 BS EN ISO 20126:2005. Dentistry. Manual toothbrushes. General requirements and test methods
BS EN 60401-1:2005 BS EN 60401-1:2005. Terms and nomenclature for cores made of magnetically soft ferrites. Terms used for physical irregularities
BS EN 14129:2004 BS EN 14129:2004. Pressure relief valves for LPG tanks
ISO20963 : 2005 EDTN 1 ISO20963 : 2005 EDTN 1. ISO20963 : 2005 Soil quality - Effects of pollutants on insect larvae (Oxythrea funesta) - Determination of acute toxicity
BS EN ISO 10848-3:2006 BS EN ISO 10848-3:2006. Acoustics. Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms. Application to light elements when the junction has a substantial influence
BS EN 4408-6:2005 BS EN 4408-6:2005. Aerospace series. Technical drawings. Representation of parts made of composite materials. Preforms
BS EN 62055-31:2005 BS EN 62055-31:2005. Electricity metering. Payments systems. Particular requirements. Static payment meters for active energy (classes 1 and 2)
BS EN 4408-5:2005 BS EN 4408-5:2005. Aerospace series. Technical drawings. Representation of parts made of composite materials. Seams
BS EN 4408-4:2005 BS EN 4408-4:2005. Aerospace series. Technical drawings. Representation of parts made of composite materials. Items obtained by winding
BS EN 4408-3:2005 BS EN 4408-3:2005. Aerospace series. Technical drawings. Representation of parts made of composite materials. Parts including core materials
BS EN 4408-2:2005 BS EN 4408-2:2005. Aerospace series. Technical drawings. Representation of parts made of composite materials. Laminated parts
BS EN 4408-1:2005 BS EN 4408-1:2005. Aerospace series. Technical drawings. Representation of parts made of composite materials. General rules
BS ISO 17613-1:2006 BS ISO 17613-1:2006. Manually operated pumps for drinking water. Selection and acceptance. Southeast Asia
BS ISO 14674:2005 BS ISO 14674:2005. Milk and milk powder. Determination of aflatoxin M1 content. Clean-up by immunoaffinity chromatography and determination by thin-layer chromatography
05/30042998 DC 05/30042998 DC. EN 14638-3. Transportable gas cylinders. Refillable welded receptacles of a capacitynot exceeding 150 litres. Part 3. Welded carbon steel cylinders made to a design justified by experimental methods
ISO20081 : 2005 EDTN 1 ISO20081 : 2005 EDTN 1. ISO20081 : 2005 Zinc and zinc alloys - Method of sampling - Specifications
BS EN 14638-1:2006 BS EN 14638-1:2006. Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres. Welded austenitic stainless steel cylinders made to a design justified by experimental methods
05/30042957 DC 05/30042957 DC. EN 15047. Transportable gas cylinders. Specification for the design and construction of refillable seamless steel cylinders for portable portable fire extinguishers and bottles for breathing apparatus of water capacities from 0,5 litre up to 15 litres
05/30042912 DC 05/30042912 DC. prEN 15045. Transportable gas cylinders. Specification for the design and construction of refillable seamless aluminium or aluminium alloy gas cylinders for portable CO2 fire extinguishers of water capacities from 0,5 litre up to 15 litres
BS 715:2005 BS 715:2005. Specification for metal flue boxes for gas-fired appliances not exceeding 20 kW
BS ISO 21951:2001 BS ISO 21951:2001. Coated abrasives. Plain discs with holes for dust extraction
BS ISO 21950:2001 BS ISO 21950:2001. Coated abrasives. Plain discs
BS ISO 21949:2001 BS ISO 21949:2001. Coated abrasives. Plain sheets with holes for dust extraction
BS IEC 60709:2004 BS IEC 60709:2004. Nuclear power plants. Instrumentation and control systems important to safety. Separation
BS EN 62124:2005 BS EN 62124:2005. Photovoltaic (PV) stand-alone systems. Design verification
BS EN 61243-1:2005 BS EN 61243-1:2005. Live working. Voltage detectors. Capacitive type to be used for voltages exceeding 1 kV a.c
BS ISO 16067-1:2003 BS ISO 16067-1:2003. Photography. Spatial resolution measurements for electronic scanners for photographic images. Scanners for reflective media
BS EN ISO 11252:2004 BS EN ISO 11252:2004. Lasers and laser-related equipment. Laser device. Minimum requirements for documentation
BS EN ISO 10052:2004 BS EN ISO 10052:2004. Acoustics. Field measurements of airborne and impact sound insulation and of service equipment sound. Survey method
PD ISO/IEC TR 15443-2:2005 PD ISO/IEC TR 15443-2:2005. Information technology. Security techniques. A framework for IT security assurance. Assurance methods
BS ISO/IEC 18032:2005 BS ISO/IEC 18032:2005. Information technology. Security techniques. Prime number generation
BS ISO/IEC 18033-1:2005 BS ISO/IEC 18033-1:2005. Information technology. Security techniques. Encryption algorithms. General
BS ISO 14490-3:2004 BS ISO 14490-3:2004. Optics and optical instruments. Test methods for telescopic systems. Test methods for telescopic sights
BS ISO 14135-2:2003 BS ISO 14135-2:2003. Optics and optical instruments. Specification for telescopic sights. High-performance instruments
BS ISO 14135-1:2003 BS ISO 14135-1:2003. Optics and optical instruments. Specification for telescopic sights. General-purpose instruments
BS ISO 21528-2:2004 BS ISO 21528-2:2004. Microbiology of food and animal feeding stuffs. Horizontal methods for the detection and enumeration of Enterobacteriaceae. Colony-count method
BS ISO 21528-1:2004 BS ISO 21528-1:2004. Microbiology of food and animal feeding stuffs. Horizontal methods for the detection and enumeration of Enterobacteriaceae. Detection and enumeration by MPN technique with pre-enrichment
BS ISO 17288-2:2004 BS ISO 17288-2:2004. Passenger cars. Free-steer behaviour. Steering-pulse open-loop test method
BS EN 13923:2005 BS EN 13923:2005. Filament-wound FRP pressure vessels. Materials, design, manufacturing and testing
BS EN ISO 12567-2:2005 BS EN ISO 12567-2:2005. Thermal performance of windows and doors. Determination of thermal transmittance by hot box method. Roof windows and other projecting windows
BS EN 14081-3:2005 BS EN 14081-3:2005. Timber structures. Strength graded structural timber with rectangular cross section. Machine grading. Additional requirements for factory production control
BS EN 14081-2:2005 BS EN 14081-2:2005. Timber structures. Strength graded structural timber with rectangular cross section. Machine grading. Additional requirements for initial type testing
BS EN 14081-1:2005 BS EN 14081-1:2005. Timber structures. Strength graded structural timber with rectangular cross section. General requirements
BS EN 14080:2005 BS EN 14080:2005. Timber structures. Glued laminated timber. Requirements
BS EN 12502-5:2004 BS EN 12502-5:2004. Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. Influencing factors for cast iron, unalloyed and low alloyed steels
BS EN 14798:2005 BS EN 14798:2005. Glass packaging. Hand-held crown bottle openers. Dimensions
BS EN 14076:2004 BS EN 14076:2004. Timber stairs. Terminology
BS EN 408:2003 BS EN 408:2003. Timber structures. Structural timber and glued laminated timber. Determination of some physical and mechanical properties
BS EN 60669-2-4:2005 BS EN 60669-2-4:2005. Switches for household and similar fixed electrical installations. Particular requirements. Isolating switches
BS EN 14074:2004 BS EN 14074:2004. Office furniture. Tables and desks and storage furniture. Test methods for the determination of strength and durability of moving parts
BS EN 14073-3:2004 BS EN 14073-3:2004. Office furniture. Storage furniture. Test methods for the determination of stability and strength of the structure
DD CEN/TS 13130-27:2005 DD CEN/TS 13130-27:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 2,4,6-triamino-1,3,5-triazine in food simulants
DD CEN/TS 13130-28:2005 DD CEN/TS 13130-28:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 1,1,1-trimethylopropane in food simulants
DD CEN/TS 13130-26:2005 DD CEN/TS 13130-26:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 1-octene and tetrahydrofuran in food simulants
DD CEN/TS 13130-25:2005 DD CEN/TS 13130-25:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 4-methyl-1-pentene in food simulants
DD CEN/TS 13130-23:2005 DD CEN/TS 13130-23:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of formaldehyde and hexamethylenetetramine in food simulants
DD CEN/TS 13130-24:2005 DD CEN/TS 13130-24:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of maleic acid and maleic anhydride in food simulants
DD CEN/TS 13130-21:2005 DD CEN/TS 13130-21:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of ethylenediamine and hexamethylenediamine in food simulants
DD CEN/TS 13130-22:2005 DD CEN/TS 13130-22:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of ethylene oxide and propylene oxide in plastics
DD CEN/TS 13130-18:2005 DD CEN/TS 13130-18:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 1,2-dihydroxybenzene, 1,3-dihydroxybenzene, 1,4-dihydroxybenzene, 4,4'-dihydroxybenzophenone and 4,4'- dihydroxybiphenyl in food simulants
DD CEN/TS 13130-20:2005 DD CEN/TS 13130-20:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of epichlorohydrin in plastics
DD CEN/TS 13130-19:2005 DD CEN/TS 13130-19:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of dimethylaminoethanol in food simulants
DD CEN/TS 13130-17:2005 DD CEN/TS 13130-17:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of carbonyl chloride in plastics
DD CEN/TS 13130-16:2005 DD CEN/TS 13130-16:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of caprolactam and caprolactam salt in food simulants
DD CEN/TS 13130-15:2005 DD CEN/TS 13130-15:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 1,3-butadiene in food simulants
BS EN 13209-2:2005 BS EN 13209-2:2005. Child use and care articles. Baby carriers. Safety requirements and test methods. Soft carrier
DD CEN/TS 13130-14:2005 DD CEN/TS 13130-14:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 3,3-bis(3-methyl-4-hydroxyphenyl)2-indolinone in food simulants
DD CEN/TS 13130-13:2005 DD CEN/TS 13130-13:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 2,2-bis(4-hydroxyphenyl)propane (Bisphenol A) in food simulants
DD CEN/TS 13130-12:2005 DD CEN/TS 13130-12:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 1,3-benzenedimethaneamine in food simulants
DD CEN/TS 13130-11:2005 DD CEN/TS 13130-11:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 11-aminoundecanoic acid in food simulants
DD CEN/TS 13130-10:2005 DD CEN/TS 13130-10:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of acrylamide in food simulants
BS ISO/IEC 19501:2005 BS ISO/IEC 19501:2005. Information technology. Open distributed processing. Unified modeling language (UML). Version 1.4.2
DD CEN/TS 13130-9:2005 DD CEN/TS 13130-9:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of acetic acid, vinyl ester in food simulants
BS ISO 5667-6:2005 BS ISO 5667-6:2005. Water quality. Sampling. Guidance on sampling of rivers and streams
BS EN ISO 10253:2006 BS EN ISO 10253:2006. Water quality. Marine algal growth inhibition test with Skeletonema costatum and Phaeodactylum tricornutum
BS IEC 62241:2004 BS IEC 62241:2004. Nuclear power plants. Main control room. Alarm functions and presentation
BS EN 61300-2-19:2005 BS EN 61300-2-19:2005. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Damp heat (steady state)
BS EN 61300-2-18:2005 BS EN 61300-2-18:2005. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Dry heat. High temperature endurance


Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment