Cheapest & Latest BSI Standard (PDF) (24)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


BS EN 13109:2002 BS EN 13109:2002. LPG tanks. Disposal
BS EN 14201:2004 BS EN 14201:2004. Blinds and shutters. Resistance to repeated operations (mechanical endurance). Methods of testing
BS EN 14202:2004 BS EN 14202:2004. Blinds and shutters. Suitability for use of tubular and square motorizations. Requirements and test methods
BS EN 14203:2004 BS EN 14203:2004. Blinds and shutters. Capability for use of gears with crank handle. Requirements and test methods
BS EN 14218:2003 BS EN 14218:2003. Hexagon nuts with flange. Fine pitch thread
BS EN 14196:2003 BS EN 14196:2003. Geosynthetics. Test methods for measuring mass per unit area of clay geosynthetic barriers
BS EN 14187-1:2003 BS EN 14187-1:2003. Cold applied joint sealants. Test method for the determination of rate of cure
BS EN 14187-2:2003 BS EN 14187-2:2003. Cold applied joint sealants. Test method for the determination of tack free time
BS EN 14187-3:2003 BS EN 14187-3:2003. Cold applied joint sealants. Test method for the determination of self-levelling properties
BS EN 14187-4:2003 BS EN 14187-4:2003. Cold applied joint sealants. Test method for the determination of the change in mass and volume after immersion in test fuel
BS EN 14187-5:2003 BS EN 14187-5:2003. Cold applied joint sealants. Test method for the determination of the resistance to hydrolysis
BS EN 14187-6:2003 BS EN 14187-6:2003. Cold applied joint sealants. Test method for the determination of the adhesion/cohesion properties after immersion in chemical liquids
BS EN 14187-7:2003 BS EN 14187-7:2003. Cold applied joint sealants. Test method for the determination of the resistance to flame
BS EN 14187-8:2003 BS EN 14187-8:2003. Cold applied joint sealants. Test method for the determination of the artificial weathering by UV-irradiation
BS EN 14227-1:2004 BS EN 14227-1:2004. Unbound and hydraulically bound mixtures. Specifications. Cement bound granular mixtures
BS EN 14227-2:2004 BS EN 14227-2:2004. Hydraulically bound mixtures. Specifications. Slag bound mixtures
BS EN 14227-3:2004 BS EN 14227-3:2004. Hydraulically bound mixtures. Specifications. Fly ash bound mixtures
BS EN 14227-4:2004 BS EN 14227-4:2004. Hydraulically bound mixtures. Specifications. Fly ash for hydraulically bound mixtures
BS ISO 8084:2003 BS ISO 8084:2003. Machinery for forestry. Operator protective structures. Laboratory tests and performance requirements
BS EN 60730-2-5:2002 BS EN 60730-2-5:2002. Automatic electrical controls for household and similar use. Particular requirements for automatic electrical burner control systems
BS ISO 5893:2002 BS ISO 5893:2002. Rubber and plastics test equipment. Tensile, flexural and compression types (constant rate of traverse). Specification
EN14175-3 : 2003 EN14175-3 : 2003. EN14175-3 : 2003 Fume cupboards. Part 3: Type test methods
BS 7997:2003 BS 7997:2003. Products for tactile paving surface indicators. Specification
BS ISO 2330:2002 BS ISO 2330:2002. Fork-lift trucks. Fork arms. Technical characteristics and testing
BS EN 62148-6:2003 BS EN 62148-6:2003. Fibre optic active components and devices. Package and interface standards. ATM-PON transceivers
BS EN 62148-11:2003 BS EN 62148-11:2003. Fibre optic active components and devices. Package and interface standards. 14-pin modulator-integrated laser diode transmitters
BS EN 62148-1:2002 BS EN 62148-1:2002. Fibre optic active components and devices. Package and interface standards. General and guidance
BS EN 50377-6-1:2002 BS EN 50377-6-1:2002. Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type SC-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre
BS 5703-1:2003 BS 5703-1:2003. Guide to data analysis and quality control using cusum techniques. Uses and value of cusum charts in business, industry, commerce and public service
BS 5703-2:2003 BS 5703-2:2003. Guide to data analysis and quality control using cusum techniques. Introduction to decision-making using cusum techniques
BS 5703-4:2003 BS 5703-4:2003. Guide to data analysis and quality control using cusum techniques. Cusum methods for discrete (count/classified) data
BS 5703-3:2003 BS 5703-3:2003. Guide to data analysis and quality control using cusum techniques. Cusum methods for process/quality control using measured data
BS EN 14206:2003 BS EN 14206:2003. Inland navigation vessels. Gangways for passenger vessels. Requirements, tests
BS 7121-2:2003 BS 7121-2:2003. Code of practice for safe use of cranes. Inspection, testing and examination
PD 8010-2:2004 PD 8010-2:2004. Code of practice for pipelines. Subsea pipelines
BS EN 50125-2:2002 BS EN 50125-2:2002. Railway applications. Environmental conditions for equipment. Fixed electrical installations
BS EN 50125-3:2003 BS EN 50125-3:2003. Railway applications. Environmental conditions for equipment. Equipment for signalling and telecommunications
BS EN 50318:2002 BS EN 50318:2002. Railway applications. Current collection systems. Validation of simulation of the dynamic interaction between pantograph and overhead contact line
BS EN 60077-4:2003 BS EN 60077-4:2003. Railway applications. Electric equipment for rolling stock. Electrotechnical components. Rules for AC circuit-breakers
BS EN 60077-5:2003 BS EN 60077-5:2003. Railway applications. Electrotechnical equipment for rolling stock. Electrotechnical components. Rules for HV fuses
BS EN 61377-2:2002 BS EN 61377-2:2002. Railway applications. Rolling stock. Combined testing. Chopper-fed direct current traction motors and their control
02/710845 DC 02/710845 DC. BS 7121-13. Code of practice for safe use of cranes. Part 13: Hydraulic gantry lifting systems
BS EN 60077-2:2002 BS EN 60077-2:2002. Railway applications. Electric equipment for rolling stock. Electrotechnical components. General rules
BS EN 60077-1:2002 BS EN 60077-1:2002. Railway applications. Electric equipment for rolling stock. General service conditions and general rules
BS 5701-1:2003 BS 5701-1:2003. Guide to quality control and performance improvement using qualitative (attribute) data. Uses and value of attribute charts in business, industry, commerce and public service
BS 350:2004 BS 350:2004. Conversion factors for units
BS EN 14197-1:2003 BS EN 14197-1:2003. Cryogenic vessels. Static non-vacuum insulated vessels. Fundamental requirements
BS EN 1515-2:2001 BS EN 1515-2:2001. Flanges and their joints. Bolting. Classification of bolt materials for steel flanges, PN designated
BS EN 10264-3:2002 BS EN 10264-3:2002. Steel wire and wire products. Steel wire for ropes. Round and shaped non alloyed steel wire for high duty applications
BS EN 10264-4:2002 BS EN 10264-4:2002. Steel wire and wire products. Steel wire for ropes. Stainless steel wire
BS EN 14210:2003 BS EN 14210:2003. Surface active agents. Determination of interfacial tension of solutions of surface active agents by the stirrup or ring method
BS ISO 16014-4:2003 BS ISO 16014-4:2003. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. High-temperature method
BS EN ISO 10651-2:2004 BS EN ISO 10651-2:2004. Lung ventilators for medical use. Particular requirements for basic safety and essential performance. Home care ventilators for ventilator-dependent patients
BS EN ISO 10651-6:2004 BS EN ISO 10651-6:2004. Lung ventilators for medical use. Particular requirements for basic safety and essential performance. Home-care ventilatory support devices
BS ISO 12353-2:2003 BS ISO 12353-2:2003. Road vehicles. Traffic accident analysis. Guidelines for the use of impact severity measures
BS ISO 15859-2:2004 BS ISO 15859-2:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methods. Hydrogen
BS ISO 15859-4:2004 BS ISO 15859-4:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methods. Helium
BS ISO 15859-5:2004 BS ISO 15859-5:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methods. Nitrogen tetroxide propellants
BS ISO 15859-9:2004 BS ISO 15859-9:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methods. Argon
BS ISO 15859-10:2004 BS ISO 15859-10:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methods. Water
BS ISO 15859-11:2004 BS ISO 15859-11:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methods. Ammonia
BS ISO 15859-12:2004 BS ISO 15859-12:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methods. Carbon dioxide
BS ISO 15859-13:2004 BS ISO 15859-13:2004. Aerospace series. Space systems. Fluid characteristics, sampling and test methods. Breathing air
PD CR 14245:2001 PD CR 14245:2001. Guidelines for the application of EN 197-2. Conformity Evaluation
PD IEC TR 61282-7:2003 PD IEC TR 61282-7:2003. Fibre optic communication system design guides. Statistical calculation of chromatic dispersion
BS EN 60747-15:2004 BS EN 60747-15:2004. Discrete semiconductor devices. Isolated power semiconductor devices
BS EN 12098-3:2002 BS EN 12098-3:2002. Controls for heating systems. Outside temperature compensated control equipment for electrical heating systems
BS EN 61280-2-9:2002 BS EN 61280-2-9:2002. Fibre optic communication subsystem basic test procedures. Test procedures for digital systems. Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems
PD IEC TR 61282-6:2003 PD IEC TR 61282-6:2003. Fibre optic communication system design guides. Skew design in parallel optical interconnection systems
PD IEC TR 61282-2:2003 PD IEC TR 61282-2:2003. Fibre optic communication system design guides. Multimode and single-mode Gbit/s applications. Gigabit ethernet model
ISO7240-4 : 2003 EDTN 1 ISO7240-4 : 2003 EDTN 1. ISO7240-4 : 2003 Fire detection and fire alarm systems-. Part 4: Power supply equipment
BS ISO/IEC 90003:2004 BS ISO/IEC 90003:2004. Software engineering. Guidelines for the application of ISO 9001:2000 to computer software
BS ISO/IEC 14496-8:2004 BS ISO/IEC 14496-8:2004. Information technology. Coding of audio-visual objects. Carriage of ISO/IEC 14496 Contents over IP networks
BS EN 61788-4:2001 BS EN 61788-4:2001. Superconductivity. Residual resistance ratio measurement. Residual resistance ratio of Nb-Ti composite superconductors
BS ISO 14500:2003 BS ISO 14500:2003. Textile machinery and accessories. Harnesses for Jacquard weaving machines. Vocabulary
BS EN 957-9:2003 BS EN 957-9:2003. Stationary training equipment. Elliptical trainers, additional specific safety requirements and test methods
DD CEN/TS 14507-2:2003 DD CEN/TS 14507-2:2003. Inhalational nitric oxide systems. Supply systems
04/30055611 DC 04/30055611 DC. BS EN 124. Gully tops and manhole tops for vehicular and pedestrian areas
BS EN 61286:2002 BS EN 61286:2002. Information technology. Coded graphic character set for use in the preparation of documents used in electrotechnology and for information interchange
BS EN 12253:2004 BS EN 12253:2004. Road transport and traffic telematics. Dedicated short-range communication. Physical layer using microwave at 5.8 GHz
BS EN 13372:2004 BS EN 13372:2004. Road transport and traffic telematics (RTTT). Dedicated short-range communication. Profiles for RTTT applications
BS 6001-5:2002 BS 6001-5:2002. Sampling procedures for inspection by attributes. Procedures for assessment of declared quality levels
DD CEN/TS 1071-7:2003 DD CEN/TS 1071-7:2003. Advanced technical ceramics. Methods of test for ceramic coatings. Determination of hardness and Young's modulus by instrumented indentation testing
BS ISO/IEC 15474-1:2002 BS ISO/IEC 15474-1:2002. Information technology. CDIF framework. Overview
PD 0028:2002 PD 0028:2002. Quantitative software management. Software measurement methods. A guide to the use of ISO/IEC and other standards for obtaining and using software measurements for product and process improvement
BS EN 556-2:2003 BS EN 556-2:2003. Sterilization of medical devices. Requirements for medical devices to be designated "STERILE". Requirements for aseptically processed medical devices
BS EN 1367-5:2002 BS EN 1367-5:2002. Tests for thermal and weathering properties of aggregates. Determination of resistance to thermal shock
BS IEC 61097-2:2002 BS IEC 61097-2:2002. Global maritime distress and safety system (GMDSS). COSPAS-SARSAT EPIRB. Satellite emergency position indicating radio beacon operating on 406 MHz. Operational and performance requirements, methods of testing and required test results
BS 8204-1:2002 BS 8204-1:2002. Screeds, bases and in-situ floorings. Concrete bases and cement sand levelling screeds to receive floorings. Code of practice
BS 8204-2:2002 BS 8204-2:2002. Screeds, bases and in-situ floorings. Concrete wearing surfaces. Code of practice
BS EN 61000-4-21:2003 BS EN 61000-4-21:2003. Electromagnetic compatibility (EMC). Testing and measurement techniques. Reverberation chamber test methods
BS EN ISO 19900:2002 BS EN ISO 19900:2002. Petroleum and natural gas industries. General requiremenents for offshore structures
BS EN 71-2:2003 BS EN 71-2:2003. Safety of toys. Flammability
BS EN 14240:2004 BS EN 14240:2004. Ventilation for buildings. Chilled ceilings. Testing and rating
BS ISO 3160-2:2003 BS ISO 3160-2:2003. Watch-cases and accessories. Gold alloy coverings. Determination of fineness, thickness, corrosion resistance and adhesion
BS EN 14239:2004 BS EN 14239:2004. Ventilation for buildings. Ductwork. Measurement of ductwork surface area
BS EN 12501-1:2003 BS EN 12501-1:2003. Protection of metallic materials against corrosion. Corrosion likelihood in soil. General
BS EN 12501-2:2003 BS EN 12501-2:2003. Protection of metallic materials against corrosion. Corrosion likelihood in soil. Low alloyed and non alloyed ferrous materials
ISO9564-3 : 2003 EDTN 1 ISO9564-3 : 2003 EDTN 1. ISO9564-3 : 2003 Banking -- Personal Identification Number management and security --. Part 3: PIN protection requirements for offline PIN handling in ATM and POS systems
WD/ISO/IEC21000-2 : 2003 EDTN 1 WD/ISO/IEC21000-2 : 2003 EDTN 1. ISO/IEC21000-2 : 2003 Information technology- Multimedia Framework (MPEG-21). Part 2: Digital Item Declaration
BS ISO 3272-1:2003 BS ISO 3272-1:2003. Microfilming of technical drawings and other drawing office documents. Operating procedures
BS EN 62148-5:2003 BS EN 62148-5:2003. Fibre optic active components and devices. Package and interface standards. SC 1x9 fibre optic modules
BS 7821-6:2002, HD 428-6 S1:2002 BS 7821-6:2002, HD 428-6 S1:2002. Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Requirements and tests concerning pressurized corrugated tanks
BS ISO 19379:2003 BS ISO 19379:2003. Ships and marine technology. ECS databases. Content, quality, updating and testing
ISO16844-2 : 2004 EDTN 1 ISO16844-2 : 2004 EDTN 1. ISO16844-2 : 2004 Road vehicles - Tachograph systems. Part 2: Recording unit, electrical interfaces
BS EN 50281-3:2002 BS EN 50281-3:2002. Electrical apparatus for use in the presence of combustible dust. Classification of areas where combustible dusts are or may be present
ISO16844-6 : 2004 EDTN1 ISO16844-6 : 2004 EDTN1. ISO16844-6 : 2004 Road vehicles - Tachograph systems. Part 6: Diagnostics
ISO16844-7 : 2004 EDTN1 ISO16844-7 : 2004 EDTN1. ISO16844-7 : 2004 Road vehicles - Tachograph systems. Part 7: Parameter
BS EN 13182:2002 BS EN 13182:2002. Ventilation for buildings. Instrumentation requirements for air velocity measurements in ventilated spaces
BS EN 60375:2003 BS EN 60375:2003. Conventions concerning electric and magnetic circuits
BS EN 60519-6:2002 BS EN 60519-6:2002. Safety in electroheat installations. Specifications for safety in industrial microwave heating equipment
BS EN 60519-1:2003 BS EN 60519-1:2003. Safety in electroheat installations. General requirements
BS ISO 22029:2003 BS ISO 22029:2003. Standard file format for spectral data exchange
DD CLC/TS 50398:2002 DD CLC/TS 50398:2002. Alarm systems. Combined and integrated alarm systems. General requirements
BS ISO 14368-2:2003 BS ISO 14368-2:2003. Mineral and sapphire watch-glasses. Assembly to the case by adhesive or using a gasket
BS ISO 14368-3:2003 BS ISO 14368-3:2003. Mineral and sapphire watch-glasses. Qualitative criteria and test methods
BS 7668:2004 BS 7668:2004. Weldable structural steels. Hot finished structural hollow sections in weather resistant steels. Specification
BS ISO/TR 12391-2:2002 BS ISO/TR 12391-2:2002. Gas cylinders. Refillable seamless steel. Performance tests. Fracture performance tests. Monotonic burst tests
BS EN ISO 14877:2002 BS EN ISO 14877:2002. Protective clothing for abrasive blasting operations using granular abrasives
BS EN 14481:2003 BS EN 14481:2003. Materials and articles in contact with foodstuffs. Plastics. Test methods for the determination of fatty contact
BS EN ISO 5356-1:2004 BS EN ISO 5356-1:2004. Anaesthetic and respiratory equipment. Conical connectors. Cones and sockets
BS EN 60947-5-4:2003 BS EN 60947-5-4:2003. Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements. Method of assessing the performance of low-energy contacts. Special tests
DD ENV 737-6:2003 DD ENV 737-6:2003. Medical gas pipeline systems. Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum
BS EN 61249-2-8:2003 BS EN 61249-2-8:2003. Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad. Reinforced base materials clad and unclad. Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
BS EN 61249-2-9:2003 BS EN 61249-2-9:2003. Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad. Reinforced base materials clad and unclad. Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
BS EN 14161:2003 BS EN 14161:2003. Petroleum and natural gas industries. Pipeline transportation systems
BS EN 61249-2-21:2003 BS EN 61249-2-21:2003. Materials for printed boards and other interconnecting structures. Reinforced base materials, clad and unclad. Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
BS EN 61280-1-4:2003 BS EN 61280-1-4:2003. Fibre optic communication subsystem basic test procedures. Test procedures for general communication subsystems. Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters
BS EN 61290-10-3:2003 BS EN 61290-10-3:2003. Optical amplifiers. Test methods. Multichannel parameters. Probe methods
BS EN 61290-11-1:2003 BS EN 61290-11-1:2003. Optical fibre amplifiers. Basic specification. Polarization mode dispersion. Jones matrix eigenanalysis method (JME)
BS EN 62148-10:2003 BS EN 62148-10:2003. Fibre optic active components and devices. Package and interface standards. SFF MU duplex 20-pin transceivers
BS EN 62148-7:2003 BS EN 62148-7:2003. Fibre optic active components and devices. Package and interface standards. SFF LC 10-pin transceivers
BS EN 62148-8:2003 BS EN 62148-8:2003. Fibre optic active components and devices. Package and interface standards. SFF LC 20-pin transceivers
BS EN 62148-9:2003 BS EN 62148-9:2003. Fibre optic active components and devices. Package and interface standards. SFF MU duplex 10-pin transceivers
BS EN 62149-4:2003 BS EN 62149-4:2003. Fibre optic active components and devices. Performance standards. 1300 nm fibre optic transceivers for Gigabit Ethernet application
ISO11898-1 : 2003 EDTN 1 ISO11898-1 : 2003 EDTN 1. ISO11898-1 : 2003 Road vehicles - Controller area network (CAN). Part 1: Data link layer and physical signalling
ISO11898-2 : 2003 EDTN 1 ISO11898-2 : 2003 EDTN 1. ISO11898-2 : 2003 Road vehicles - Controller area network (CAN). Part 2: High-speed medium access unit
BS ISO 6497:2002 BS ISO 6497:2002. Animal feeding stuffs. Sampling
BS ISO 17724:2003 BS ISO 17724:2003. Graphical symbols. Vocabulary
ISO13849-2 : 2003 EDTN 1 ISO13849-2 : 2003 EDTN 1. ISO13849-2 : 2003 Safety of machinery- Safety-related parts of control system. Part 2: Validation
BS EN 13395-3:2002 BS EN 13395-3:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Test for flow of repair concrete
DD ISO/TS 21748:2004 DD ISO/TS 21748:2004. Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
BS EN 50153:2002 BS EN 50153:2002. Railway applications. Rolling stock. Protective provisions relating to electrical hazards
BS EN ISO 15749-1:2004 BS EN ISO 15749-1:2004. Ships and marine technology. Drainage systems on ships and marine structures. Sanitary drainage-system design
PD 6680:2002 PD 6680:2002. Guidance on the new European Standards for thermal insulation materials
03/110173 DC 03/110173 DC. ISO 16322-3. Textiles. Determination of spirality after laundering. Part 3. Woven and knitted garments. Percentage of spirality change
BS EN 1186-11:2002 BS EN 1186-11:2002. Materials and articles in contact with foodstuffs. Plastics. Test methods for overall migration into mixtures of C-labelled synthetic triglycerides
BS EN 1186-10:2002 BS EN 1186-10:2002. Materials and articles in contact with foodstuffs. Plastics. Test methods for overall migration into olive oil (modified method for use in cases where incomplete extraction of olive oil occurs)
BS EN 1186-15:2002 BS EN 1186-15:2002. Materials and articles in contact with foodstuffs. Plastics. Alternative test methods to migration into fatty food simulants by rapid extraction into iso-octane and/or 95 % ethanol
BS EN 1186-13:2002 BS EN 1186-13:2002. Materials and articles in contact with foodstuffs. Plastics. Test methods for overall migration at high temperatures
BS EN 1186-14:2002 BS EN 1186-14:2002. Materials and articles in contact with foodstuffs. Plastics. Test methods for 'substitute tests' for overall migration from plastics intended to come into contact with fatty foodstuffs using test media iso-octane and 95% ethanol
BS EN 1443:2003 BS EN 1443:2003. Chimneys. General requirements
BS EN 14278-2:2004 BS EN 14278-2:2004. Textiles. Determination of cotton fibre stickiness. Method using an automatic thermodetection plate device
BS EN 14278-3:2004 BS EN 14278-3:2004. Textiles. Determination of cotton fibres stickiness. Method using an automatic thermodetection rotating drum device
BS EN 14533:2003 BS EN 14533:2003. Textiles and textile products. Burning behaviour of bedding items. Classification scheme
ISO8607 : 2003 (R08) EDTN 1 ISO8607 : 2003 (R08) EDTN 1. ISO8607 : 2003 Artificial insemination of animals- Frozen semen of breeding bulls- Enumeration of living aerobic microorganisms
BS EN 12999:2002+A2:2006 BS EN 12999:2002+A2:2006. Cranes. Loader cranes
BS EN 50123-2:2003 BS EN 50123-2:2003. Railway applications. Fixed installations. D.C. switchgear. D.C. circuit breakers
BS EN 50123-3:2003 BS EN 50123-3:2003. Railway applications. Fixed installations. D.C. switchgear. Indoor d.c. disconnectors, switch-disconnectors and earthing switches
BS EN 50123-4:2003 BS EN 50123-4:2003. Railway applications. Fixed installations. D.C. switchgear. Outdoor d.c. disconnectors, switch-disconnectors and earthing switches
BS EN 50123-5:2003 BS EN 50123-5:2003. Railway applications. Fixed installations. D.C. switchgear. Surge arresters and low-voltage limiters for specific use in d.c. systems
BS EN 50123-6:2003 BS EN 50123-6:2003. Railway applications. Fixed installations. D.C. switchgear. D.C. switchgear assemblies
BS EN 50123-7-1:2003 BS EN 50123-7-1:2003. Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems. Measurement, control and protection devices for specific use in d.c. traction systems. Application guide
BS EN 50123-7-2:2003 BS EN 50123-7-2:2003. Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems. Isolating current transducers and other current measuring devices
BS EN 50123-7-3:2003 BS EN 50123-7-3:2003. Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems. Isolating voltage transducers and other voltage measuring devices
PAS 41:2003 PAS 41:2003. Directional sounders. Requirements and tests
BS ISO/IEC 5218:2004 BS ISO/IEC 5218:2004. Information technology. Codes for the representation of human sexes
PD ISO/TR 18569:2004 PD ISO/TR 18569:2004. Safety of machinery. Guidelines for the understanding and use of safety of machinery standards.
BS EN 50306-4:2002 BS EN 50306-4:2002. Railway applications. Railway rolling stock cables having special fire performance. Thin wall. Multicore and multipair cables standard wall sheathed
BS EN 50306-3:2002 BS EN 50306-3:2002. Railway applications. Railway rolling stock cables having special fire performance. Thin wall. Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed
BS EN 50306-1:2002 BS EN 50306-1:2002. Railway applications. Railway rolling stock cables having special fire performance. Thin wall. General requirements
BS EN 50306-2:2002 BS EN 50306-2:2002. Railway applications. Railway rolling stock cables having special fire performance. Thin wall. Single core cables
BS EN 13155:2003 BS EN 13155:2003. Cranes. Safety. Non-fixed load lifting attachments
BS EN 13655:2002 BS EN 13655:2002. Plastics. Mulching thermoplastic films for use in agriculture and horticulture
BS EN 13528-3:2003 BS EN 13528-3:2003. Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods. Guide to selection, use and maintenance
BS ISO 491:2002 BS ISO 491:2002. Cinematography. 35 mm motion-picture film and magnetic film. Cutting and perforating dimensions
BS EN 1514-6:2003 BS EN 1514-6:2003. Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Covered serrated metal gaskets for use with steel flanges
BS ISO 8600-2:2002 BS ISO 8600-2:2002. Optics and optical instruments. Medical endoscopes and endoscopic accessories. Particular requirements for rigid bronchoscopes
BS ISO 1223:2003 BS ISO 1223:2003. Cinematography. Picture areas for motion-picture films for television. Position and dimensions
BS ISO 9236-1:2004 BS ISO 9236-1:2004. Photography. Sensitometry of screen/film systems for medical radiography. Determination of sensitometric curve shape, speed and average gradient
BS 5306-3:2003 BS 5306-3:2003. Fire extinguishing installations and equipment on premises. Code of practice for the inspection and maintenance of portable fire extinguishers
BS EN 1514-7:2004 BS EN 1514-7:2004. Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Covered metal jacketed gaskets for use with steel flanges
BS EN 12560-6:2003 BS EN 12560-6:2003. Flanges and their joints. Gaskets for class-designated flanges. Covered serrated metal gaskets for use with steel flanges
BS EN 12560-7:2004 BS EN 12560-7:2004. Flanges and their joints. Gaskets for class-designated flanges. Covered metal jacketed gaskets for use with steel flanges
WD/ISO19338 : 2003 EDTN1 WD/ISO19338 : 2003 EDTN1. ISO19338 : 2003 Performance and assessment requirements for acceptance of national standards on structural concrete
PD IEC TR 62285:2002 PD IEC TR 62285:2002. Non-linear coefficient measuring methods. Application guide
BS EN 60793-1-1:2003 BS EN 60793-1-1:2003. Optical fibres. Measurement methods and test procedures. General and guidance
BS EN 10151:2002 BS EN 10151:2002. Stainless steel strip for springs. Technical delivery conditions
BS EN 14182:2002 BS EN 14182:2002. Packaging. Terminology. Basic terms and definitions
BS EN 50016:2002 BS EN 50016:2002. Electrical apparatus for potentially explosive atmospheres. Pressurized apparatus "p"
BS EN 60601-2-26:2003 BS EN 60601-2-26:2003. Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety of electroencephalographs
BS EN 50394-1:2004 BS EN 50394-1:2004. Electrical apparatus for potentially explosive atmospheres. Group I. Intrinsically safe systems. Construction and testing
BS EN 80416-3:2003 BS EN 80416-3:2003. Basic principles for graphical symbols for use on equipment. Guidelines for the application of graphical symbols
BS EN ISO 9832:2003 BS EN ISO 9832:2003. Animal and vegetable fats and oils. Determination of residual technical hexane content
BS ISO 6870:2002 BS ISO 6870:2002. Animal feeding stuffs. Qualitative determination of zearalenone
BS EN 13599:2002 BS EN 13599:2002. Copper and copper alloys. Copper plate, sheet and strip for electrical purposes
ISO8583-3 : 2003 EDTN 2 ISO8583-3 : 2003 EDTN 2. ISO8583-3 : 2003 Financial transaction card originated messages- Interchange message specifications. Part 3: Maintenance procedures for messages, data elements and code values
BS EN 14260:2003 BS EN 14260:2003. Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Road tars. Characteristics and test methods
BS EN 14261:2003 BS EN 14261:2003. Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Refractory binders. Characteristics and test methods
BS EN 14262:2003 BS EN 14262:2003. Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Briquetting pitch. Characteristics and test methods
BS EN 14263:2003 BS EN 14263:2003. Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Carbon binder pitch. Characteristics and test methods
BS EN 14264:2003 BS EN 14264:2003. Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Impregnating pitch. Characteristics and test methods
BS EN 14265:2003 BS EN 14265:2003. Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Painting tar. Characteristics and test methods
BS EN 14266:2003 BS EN 14266:2003. Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Coating tar. Characteristics and test methods
BS EN 14037-2:2003 BS EN 14037-2:2003. Ceiling mounted radiant panels supplied with water at temperature below 120°C. Test methods for thermal output
BS EN 14037-3:2003 BS EN 14037-3:2003. Ceiling mounted radiant panels supplied with water at temperature below 120°C. Rating method and evaluation of radiant thermal output
BS EN 14037-1:2003 BS EN 14037-1:2003. Ceiling mounted radiant panels supplied with water at temperature below 120°C. Technical specifications and requirements
BS 5276-2:2003 BS 5276-2:2003. Pressure vessel details (dimensions). Specification for saddle supports for horizontal cylindrical pressure vessels
WD/ISO/TS17477 : 2003 EDTN 1 WD/ISO/TS17477 : 2003 EDTN 1. ISO/TS17477 : 2003 Acceptance tests for CO2-laser beam machines for welding and cutting - using 2D moving optics type
BS EN 61850-9-2:2004 BS EN 61850-9-2:2004. Communication networks and systems in substations. Specific communication service mapping (SCSM). Sampled values over ISO/IEC 8802-3
BS 5499-6:2002 BS 5499-6:2002. Graphical symbols and signs. Safety signs, including fire safety signs. Creation and design of graphical symbols for use in safety signs. Requirements
BS 8412:2004 BS 8412:2004. Equipment for crop protection. Performance requirements for application systems used to make spatially variable applications to field crops. Specification
BS 7722:2002 BS 7722:2002. Surface covered PVC-U profiles for windows and doors. Specification
BS EN 13266:2001 BS EN 13266:2001. Slow-release fertilizers. Determination of the release of the nutrients. Method for coated fertilizers
BS ISO/IEC 15946-1:2002 BS ISO/IEC 15946-1:2002. Information technology. Security techniques. Cryptographic techniques based on elliptic curves. General
BS ISO/IEC 15946-2:2002 BS ISO/IEC 15946-2:2002. Information technology. Security techniques. Cryptographic techniques based on elliptic curves. Digital signatures
BS ISO/IEC 15946-3:2002 BS ISO/IEC 15946-3:2002. Information technology. Security techniques. Cryptographic techniques based on elliptic curves. Key establishment
PD IEC TR 62296:2003 PD IEC TR 62296:2003. Considerations of unaddressed safety aspects in the Second Edition of IEC 60601-1 and proposals for new requirements
BS EN 14295:2003 BS EN 14295:2003. Welding consumables. Wire and tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels. Classification
BS ISO 21093:2003 BS ISO 21093:2003. Oil of dwarf pine (Pinus mugo Turra)
DD 257-1:2003 DD 257-1:2003. Methods of analysis of wood preservatives and treated timber. Quantitative analysis of wood preservative solutions and treated timber containing boron compounds. Determination of total boron
BS EN 60401-2:2003 BS EN 60401-2:2003. Terms and nomenclature for cores made of magnetically soft ferrites. Reference of dimensions
DD 257-2:2003 DD 257-2:2003. Methods of analysis of wood preservatives and treated timber. Quantitative analysis of wood preservative solutions and treated timber containing n-butyltin compounds. Determination of tributyltin, dibutyltin and monobutyltin
DD 257-4:2003 DD 257-4:2003. Methods of analysis of wood preservatives and treated timber. Quantitative analysis of cypermethrin in solutions of wood preservatives in organic solvents
BS EN 60401-3:2003 BS EN 60401-3:2003. Terms and nomenclature for cores made of magnetically soft ferrites. Guidelines on the format of data appearing in manufacturers' catalogues of transformer and inductor cores
BS 8414-1:2002 BS 8414-1:2002. Fire performance of external cladding systems. Test methods for non-loadbearing external cladding systems applied to the face of a building
BS EN 62156:2001 BS EN 62156:2001. Digital video recording with video compression 12,65 mm type D-9 component format 525/60 and 625/50 (digital S)
BS EN 14286:2004 BS EN 14286:2004. Aluminium and aluminium alloys. Weldable rolled products for tanks for the storage and transportation of dangerous goods
BS EN 14200:2004 BS EN 14200:2004. Railway applications. Suspension components. Parabolic springs, steel
BS EN 50377-5-1:2003 BS EN 50377-5-1:2003. Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type EC terminated on IEC 60793-2 category B.1.1 singlemode fibre
BS EN 62149-6:2003 BS EN 62149-6:2003. Fibre optic active components and devices. Performance standards. 650-nm 250-Mbit/s plastic optical fibre transceivers
DD ENV 14272:2002 DD ENV 14272:2002. Plywood. Calculation method for some mechanical properties
BS EN 60601-2-44:2001, BS 5724-2.44:2001 BS EN 60601-2-44:2001, BS 5724-2.44:2001. Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety of X-ray equipment for computed tomography
BS ISO 17497-1:2004 BS ISO 17497-1:2004. Acoustics. Sound scattering properties of surfaces. Measurement of the random-incidence scattering coefficient in a reverberation room
BS ISO 6743-99:2002 BS ISO 6743-99:2002. Lubricants, industrial oils and related products (class L). Classification. General
BS ISO 4728:2003 BS ISO 4728:2003. Oil of Spanish wild marjoram (Thymus mastichina L.)
BS ISO 6743-1:2002 BS ISO 6743-1:2002. Lubricants, industrial oils and related products (class L). Classification. Family A (Total loss systems)
ISO6743-13 : 2002 EDTN 2 ISO6743-13 : 2002 EDTN 2. ISO6743-13 : 2002 Lubricants, industrial oils and related products (class L) - Classification. Part 13: Family G (Slideways)
BS EN ISO 17495:2003 BS EN ISO 17495:2003. Water quality. Determination of selected nitrophenols. Method by solid-phase extraction and gas chromatography with mass spectrometric detection
BS EN ISO 6878:2004, BS 6068-2.28:2004 BS EN ISO 6878:2004, BS 6068-2.28:2004. Water quality. Determination of phosphorus. Ammonium molybdate spectrometric method
BS IEC 61363-1:1998 BS IEC 61363-1:1998. Electrical installations of ships and mobile and fixed offshore units. Procedures for calculating short-circuit currents in three-phase a.c.
BS EN 61935-2:2003 BS EN 61935-2:2003. Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173. Patch cords and work area cords
BS EN 60073:2002 BS EN 60073:2002. Basic and safety principles for man-machine interface, marking and identification. Coding principles for indicators and actuators
BS EN 60447:2004 BS EN 60447:2004. Basic and safety principles for man-machine interface, marking and identification. Actuating principles
BS EN 60695-5-1:2003 BS EN 60695-5-1:2003. Fire hazard testing. Assessment of potential corrosion damage by fire effluent. General guidance
BS EN ISO 5674:2004 BS EN ISO 5674:2004. Tractors and machinery for agriculture and forestry. Guards for power take-off (PTO) drive-shafts. Strength and wear tests and acceptance criteria
BS EN ISO 8795:2001 BS EN ISO 8795:2001. Plastics piping systems for the transport of water intended for human consumption. Migration assessment. Determination of migration values of plastics pipes and fittings and their joints
BS EN 14290:2004 BS EN 14290:2004. Zinc and zinc alloys. Secondary raw material
BS ISO 18738:2003 BS ISO 18738:2003. Lifts (elevators). Measurement of lift ride quality
BS EN ISO 6259-1:2001 BS EN ISO 6259-1:2001. Thermoplastics pipes. Determination of tensile properties. General test method
BS EN 60749-19:2003 BS EN 60749-19:2003. Semiconductor devices. Mechanical and climatic test methods. Die shear strength
BS EN 61988-2-2:2003 BS EN 61988-2-2:2003. Plasma display panels. Measuring methods. Optoelectrical
BS EN 60749-36:2003 BS EN 60749-36:2003. Semiconductor devices. Mechanical and climatic test methods. Acceleration, steady state
BS EN 60749-6:2002 BS EN 60749-6:2002. Semiconductor devices. Mechanical and climatic test methods. Storage at high temperature
ISO16650 : 2004 EDTN 1 ISO16650 : 2004 EDTN 1. ISO16650 : 2004 Bead wire
BS EN 60191-6-4:2003 BS EN 60191-6-4:2003. Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages. Measuring methods for package dimensions of ball grid array (BGA)
BS EN 61196-4:2004 BS EN 61196-4:2004. Coaxial communication cables. Sectional specification for radiating cables
ISO/IEC10164-15 : 2002 EDTN 2 ISO/IEC10164-15 : 2002 EDTN 2.
ISO17565 : 2003 EDTN1 ISO17565 : 2003 EDTN1. ISO17565 : 2003 Fine ceramics - Test method for flexural strength of monolithic ceramicsat elevated temperature
BS EN 50377-9-1:2003 BS EN 50377-9-1:2003. Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type MT-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre
BS EN 50377-10-1:2003 BS EN 50377-10-1:2003. Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type MU-PC terminated on IEC 60793-2 category B1.1 singlemode fibre
BS EN 50083-9:2002 BS EN 50083-9:2002. Cabled distribution systems for television and sound signals. Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams
BS ISO/IEC 13249-2:2003 BS ISO/IEC 13249-2:2003. Information technology. Database languages. SQL multimedia and application packages. Full-text
BS ISO/IEC 9075 1-4,9-11,13-14:2003 BS ISO/IEC 9075 1-4,9-11,13-14:2003. Information technology. Database languages. SQL. Various parts (CD-ROM)
BS EN 14299:2004 BS EN 14299:2004. Non-active surgical implants. Particular requirements for cardiac and vascular implants. Specific requirements for arterial stents
BS ISO 13302:2003 BS ISO 13302:2003. Sensory analysis. Methods for assessing modifications to the flavour of foodstuffs due to packaging
ISO/IEC15444-5 : 2003 EDTN 1 ISO/IEC15444-5 : 2003 EDTN 1. ISO/IEC15444-5 : 2003 Information technology -- JPEG 2000 image coding system: Reference software. Reference software for the JP2 file format
WD/AMD13605 (TO BS6493-2.1 : 1985) WD/AMD13605 (TO BS6493-2.1 : 1985). BS6493-2.1 : 1985 Semiconductor devices. Part 2: Integrated circuits - Section 2.1 General
ISO/IECTR18016 : 2003 (R08)EDTN1 ISO/IECTR18016 : 2003 (R08)EDTN1. ISO/IECTR18016 : 2003 Information Technology -- Message Handling Systems (MHS) -- Interworking with Internet E-mail
PD CR 12401:2003 PD CR 12401:2003. Dentistry. Guidance on the classification of dental devices and accessories
BS EN 1028-2:2002 BS EN 1028-2:2002. Fire-fighting pumps. Fire-fighting centrifugal pumps with primer. Verification of general and safety requirements
BS EN 62216-1:2002 BS EN 62216-1:2002. Digital terrestrial television receivers for the DVB-T system. Baseline receiver specification
BS AU 268:2003 BS AU 268:2003. Passenger cars and light vans. Commercial towing pole assemblies. Specification
BS EN 14233:2002 BS EN 14233:2002. Materials and articles in contact with foodstuffs. Plastics. Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature for migration testing
BS EN 60747-16-3:2002 BS EN 60747-16-3:2002. Discrete semiconductor devices and integrated circuits. Microwave integrated circuits. Frequency converters
BS EN 1263-2:2002 BS EN 1263-2:2002. Safety nets. Safety requirements for the positioning limits
BS ISO 5758:2002 BS ISO 5758:2002. Cinematography. Labelling of containers for motion-picture film and magnetic material. Minimum information for exchange of materials
BS ISO/IEC 19761:2003 BS ISO/IEC 19761:2003. Software engineering. COSMIC-FFP. A functional size measurement method
BS ISO 2907:2002 BS ISO 2907:2002. Cinematography. Maximum projectable image area on 35 mm motion-picture film. Position and dimensions
BS EN 50392:2004 BS EN 50392:2004. Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz)
BS EN 50385:2002 BS EN 50385:2002. Product standard to demonstrate the compliances of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields (110 MHz - 40 GHz). General public
BS EN 50384:2002 BS EN 50384:2002. Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields (110 MHz - 40 GHz). Occupational
BS EN 50383:2002 BS EN 50383:2002. Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunications system (110 MHz - 40 GHz)
BS ISO 9398-1:2003 BS ISO 9398-1:2003. Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristics. Flatwork ironing machines
BS ISO 9398-2:2003 BS ISO 9398-2:2003. Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristics. Batch drying tumblers
BS ISO 9398-3:2003 BS ISO 9398-3:2003. Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristics. Washing tunnels
BS ISO 9398-4:2003 BS ISO 9398-4:2003. Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristics. Washer-extractors
BS EN 14407:2004, BS 6068-5.35:2004 BS EN 14407:2004, BS 6068-5.35:2004. Water quality. Guidance standard for the identification, enumeration and interpretation of benthic diatom samples from running waters
PD IEC TR 62284:2003 PD IEC TR 62284:2003. Effective area measurements of single-mode optical fibres. Guidance
NC/BSEN13560 : 2001 NC/BSEN13560 : 2001. bsen13560 : 2001 Surface active agents - Determination of amide nitrogen content - Potentiometric titration
BS EN 13770:2002 BS EN 13770:2002. Textiles. Determination of the abrasion resistance of knitted footwear garments
BS EN ISO 389-8:2004 BS EN ISO 389-8:2004. Acoustics. Reference zero for the calibration of audiometric equipment. Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones
BS EN 442-3:2003 BS EN 442-3:2003. Specification for radiators and convectors. Evaluation of conformity
BS ISO 5248:2003 BS ISO 5248:2003. Textile machinery and accessories. Dyeing and finishing machinery. Vocabulary of ancillary devices
BS ISO 5250:2003 BS ISO 5250:2003. Textile machinery and accessories. Dyeing and finishing machinery. Terms for tentering and heat-treatment machinery
BS EN 61965:2003 BS EN 61965:2003. Mechanical safety of cathode ray tubes
PD IEC TR 61282-4:2003 PD IEC TR 61282-4:2003. Fibre optic communication system design guides. Accommodation and utilization of non-linear effects
BS 8726-2:2002 BS 8726-2:2002. Cylindrical helical springs made from rectangular and square section wire and bar. Guide to calculation and design. Torsion springs
BS ISO 10007:2003 BS ISO 10007:2003. Quality management systems. Guidelines for configuration management
BS ISO 10006:2003 BS ISO 10006:2003. Quality management systems. Guidelines for quality management in projects
DD ENV 13287:2002 DD ENV 13287:2002. Safety, protective and occupational footwear for professional use. Test method for the determination of slip resistance
PD 6682-1:2003 PD 6682-1:2003. Aggregates. Aggregates for concrete. Guidance on the use of BS EN 12620
PD 6682-2:2003 PD 6682-2:2003. Aggregates. Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas. Guidance on the use of BS EN 13043
PD 6682-3:2003 PD 6682-3:2003. Aggregates. Aggregates for mortar. Guidance on the use of BS EN 13139
PD 6682-4:2003 PD 6682-4:2003. Aggregates. Lightweight aggregates for concrete, mortar and grout. Guidance on the use of BS EN 13055-1
PD 6682-7:2003 PD 6682-7:2003. Aggregates. Armourstone. Guidance on the use of BS EN 13383
PD 6682-8:2004 PD 6682-8:2004. Aggregates. Aggregates for railway ballast. Guidance on the use of BS EN 13450
PD 6682-9:2003 PD 6682-9:2003. Aggregates. Guidance on the use of European test method standards
BS ISO 15169:2003 BS ISO 15169:2003. Petroleum and liquid petroleum products. Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
BS 1088-1:2003 BS 1088-1:2003. Marine plywood. Requirements
BS 1088-2:2003 BS 1088-2:2003. Marine plywood. Determination of bonding quality using the knife test
BS 7543:2003 BS 7543:2003. Guide to durability of buildings and building elements, products and components
BS EN 13523-21:2003 BS EN 13523-21:2003. Coil coated metals. Test methods. Evaluation of outdoor exposed panels
BS EN 13523-22:2003 BS EN 13523-22:2003. Coil coated metals. Test methods. Colour difference. Visual comparison
BS ISO 9073-11:2002 BS ISO 9073-11:2002. Textiles. Test methods for nonwovens. Run-off
BS ISO 9073-12:2002 BS ISO 9073-12:2002. Textiles. Test methods for nonwovens. Demand absorbency
BS ISO/IEC 13888-1:2004 BS ISO/IEC 13888-1:2004. IT security techniques. Non-repudiation. General
BS ISO 10399:2004 BS ISO 10399:2004. Sensory analysis. Methodology. Duo-trio test
BS EN 14231:2003 BS EN 14231:2003. Natural stone test methods. Determination of the slip resistance by means of the pendulum tester
BS EN 10289:2002 BS EN 10289:2002. Steel tubes and fittings for onshore and offshore pipelines. External liquid applied epoxy and epoxy-modified coatings
BS ISO 8404:2003 BS ISO 8404:2003. Tools for moulding. Angle pins
BS ISO 10457:2002 BS ISO 10457:2002. Textile machinery. Dyeing and finishing machines. Nominal speeds
BS ISO 15186-2:2003 BS ISO 15186-2:2003. Acoustics. Measurement of sound insulation in buildings and of building elements using sound intensity. Field measurements
BS ISO/TR 12391-3:2002 BS ISO/TR 12391-3:2002. Gas cylinders. Refillable seamless steel. Performance tests. Fracture performance tests. Cyclical burst tests
PAS 44:2002 PAS 44:2002. Official identification eartags for cattle. Specification
BS EN 14205:2003 BS EN 14205:2003. Natural stone test methods. Determination of Knoop hardness
BS EN 593:2004 BS EN 593:2004. Industrial valves. Metallic butterfly valves
BS EN ISO 10993-1:2003 BS EN ISO 10993-1:2003. Biological evaluation of medical devices. Evaluation and testing
ISO/IEC21000-3 : 2003 EDTN 1 ISO/IEC21000-3 : 2003 EDTN 1. ISO/IEC21000-3 : 2003 Information technology- Multimedia framework (MPEG-21). Part 3: Digital Item Identification
BS EN 60115-9:2004 BS EN 60115-9:2004. Fixed resistors for use in electronic equipment. Sectional specification. Fixed surface mount resistor networks with individually measurable resistors
BS EN 60115-9-1:2004 BS EN 60115-9-1:2004. Fixed resistors for use in electronic equipment. Blank detail specification. Fixed surface mount resistor networks with individually measurable resistors. Assessment level EZ
BS EN 10290:2002 BS EN 10290:2002. Steel tubes and fittings for onshore and offshore pipelines. External liquid applied polyurethane and polyurethane-modified coatings
BS EN 12206-1:2004 BS EN 12206-1:2004. Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes. Coatings prepared from coating powder
BS EN 13894-1:2003 BS EN 13894-1:2003. Products and systems for the protection and repair of concrete structures. Test methods. Determination of fatigue under dynamic loading. During cure
ISO/IEC14776-113 : 2002 EDTN 1 ISO/IEC14776-113 : 2002 EDTN 1. ISO/IEC14476-113 : 2002 Information technology- Small Computer system interface (SCSI). Part 113: Parallel Interface-3 (SPI-3)
BS IEC 60092-303:1980 BS IEC 60092-303:1980. Electrical installation in ships. Equipment. Transformers for power and lighting
BS EN 61300-2-48:2003 BS EN 61300-2-48:2003. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Temperature-humidity cycling
BS EN 60734:2003 BS EN 60734:2003. Household electrical appliances. Performance. Hard water for testing
BS EN 81-80:2003 BS EN 81-80:2003. Safety rules for the construction and installation of lifts. Existing lifts. Rules for the improvement of safety of existing passenger and goods passenger lifts
BS EN 14325:2004 BS EN 14325:2004. Protective clothing against chemicals. Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages
BS EN 50065-2-2:2003 BS EN 50065-2-2:2003. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments
DD CEN/TS 14441:2003 DD CEN/TS 14441:2003. Postal services. Automatic identification of receptacles and containers. Mail aggregates
BS EN 14338:2003 BS EN 14338:2003. Paper and board intended to come into contact with foodstuffs. Conditions for determination of migration from paper and board using modified polyphenylene oxide (MPPO) as a simulant
BS EN 14322:2004 BS EN 14322:2004. Wood-based panels. Melamine faced boards for interior uses. Definition, requirements and classification
BS EN 14323:2004 BS EN 14323:2004. Wood-based panels. Melamine faced boards for interior uses. Test methods
WD/ISO11088 : 2004 EDTN.3 WD/ISO11088 : 2004 EDTN.3. ISO11088 : 2004 Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) system
BS EN 14331:2004 BS EN 14331:2004. Liquid petroleum products. Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates. Liquid chromatography (LC)/gas chromatography (GC) method
PAS 47:2003 PAS 47:2003. Electric security fences. Design, installation and maintenance. Specification
BS EN 12600:2002 BS EN 12600:2002. Glass in building. Pendulum test. Impact test method and classification for flat glass
PAS 49:2002 PAS 49:2002. Security consultancy. Code of practice
BS EN 1828:2002 BS EN 1828:2002. Health informatics. Categorial structure for classifications and coding systems of surgical procedures
ISO/IEC14476-2 : 2003 EDTN1 ISO/IEC14476-2 : 2003 EDTN1. Information technology -- Enhanced Communications Transport Protocol (ECTS): Specification of QoS Management for Simple Multicast Transport (Common Text Version of Text ITU-T X.ECTP-2)
BS ISO 3875:2004 BS ISO 3875:2004. Machine tools. Test conditions for external cylindrical centreless grinding machines. Testing of the accuracy
DD IEC/PAS 60793-1-49:2002 DD IEC/PAS 60793-1-49:2002. Optical fibres. Measurement methods and test procedures. Differential mode delay
BS EN 14340:2004 BS EN 14340:2004. Leather. Physical and mechanical tests. Determination of water repellency of garment leather
BS EN 14326:2003 BS EN 14326:2003. Leather. Physical and mechanical tests. Determination of resistance to horizontal spread of flame
DD IEC TS 61994-4-2:2003 DD IEC TS 61994-4-2:2003. Piezoelectric and dielectric devices for frequency control and selection. Glossary. Piezoelectric and dielectric materials. Piezoelectric ceramics
BS EN 60444-8:2003 BS EN 60444-8:2003. Measurement of quartz crystal unit parameters. Test fixture for surface mounted quartz crystal units
BS EN 14327:2003 BS EN 14327:2003. Leather. Physical and mechanical tests. Determination of abrasion resistance of automotive leather
BS EN ISO 20823:2003 BS EN ISO 20823:2003. Petroleum and related products. Determination of the flammability characteristics of fluids in contact with hot surfaces. Manifold ignition test
BS EN 60539-2:2004 BS EN 60539-2:2004. Directly heated negative temperature coefficient thermistors. Sectional specification. Surface mount negative temperature coefficient thermistors
DD CEN/TS 14631:2003 DD CEN/TS 14631:2003. Automated processing of mail items. Automatic identification of receptacles and containers. Receptacle asset numbering
ISO22093 : 2003 EDTN 1 ISO22093 : 2003 EDTN 1. ISO22093 : 2003 Industrial automation systems and integration - Physical device control Dimensional measuring interface standard (DMIS)
PD CEN/TR 14560:2003 PD CEN/TR 14560:2003. Guidelines for selection, use, care and maintenance of protective clothing against heat and flame
BS EN ISO 13709:2003 BS EN ISO 13709:2003. Centrifugal pumps for petroleum, petrochemical and natural gas industries
BS EN 14332:2004 BS EN 14332:2004. Foodstuffs. Determination of trace elements. Determination of arsenic in seafood by graphite furnace atomic absorption spectrometry (GFAAS) after microwave digestion
BS EN 14352:2004 BS EN 14352:2004. Foodstuffs. Determination of fumonisin B1 and B2 in maize based foods. HPLC method with immunoaffinity column clean up
BS EN 60862-1:2003 BS EN 60862-1:2003. Surface acoustic wave (SAW) filters of assessed quality. Generic specification
ISO10303-521 : 2003 EDTN 1 ISO10303-521 : 2003 EDTN 1. ISO10303-521 : 2003 Industrial automation systems and integration - Product data representation and exchange -. Part 521: Application interpreted construct: Manifold subsurface
ISO13584-25 : 2004 (CD-ROM) EDTN 1 ISO13584-25 : 2004 (CD-ROM) EDTN 1. ISO13584-25 : 2004 Industrial automation systems and integration - Parts library . Part 25: Logical resource: Logical model of supplier library with aggregate values and explicit content
BS EN 13138-3:2003 BS EN 13138-3:2003. Buoyant aids for swimming instruction. Safety requirements and test methods for swim seats to be worn
BS EN 13451-10:2004 BS EN 13451-10:2004. Swimming pool equipment. Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment
BS EN 13451-11:2004 BS EN 13451-11:2004. Swimming pool equipment. Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads
BS EN 764-1:2004 BS EN 764-1:2004. Pressure equipment. Terminology. Pressure, temperature, volume, nominal size
ISO14635-2 : 2004 EDTN.1 ISO14635-2 : 2004 EDTN.1. ISO14635-2 : 2004 Gears - FZG test procedures -. Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load- carrying capacity of high EP oils.
BS EN 60601-2-17:2004 BS EN 60601-2-17:2004. Medical electrical equipment. Particular requirements for the safety of automatically-controlled brachytherapy afterloading equipment
BS EN 60749-2:2002 BS EN 60749-2:2002. Semiconductor devices. Mechanical and climatic test methods. Low air pressure
BS EN 60749-4:2002 BS EN 60749-4:2002. Semiconductor devices. Mechanical and climatic test methods. Damp heat, steady state, highly accelerated stress test (HAST)
BS EN 60749-9:2002 BS EN 60749-9:2002. Semiconductor devices. Mechanical and climatic test methods. Permanence of marking
BS EN 60749-12:2002 BS EN 60749-12:2002. Semiconductor devices. Mechanical and climatic test methods. Vibration, variable frequency
BS EN 60512-25-6:2004 BS EN 60512-25-6:2004. Connectors for electronic equipment. Tests and measurements. Test 25f. Eye pattern and jitter
PAS 51:2004 PAS 51:2004. Guide to industry best practice for organizing outdoor events
ISO16100-1 : 2002 EDTN 1 ISO16100-1 : 2002 EDTN 1. ISO16100-1 : 2002 Industrial automation systems and integration - Manufacturing software capability profiling -. Part 1: Framework for interoperability
BS 7998-3:2002, IEC 60027-3:2002 BS 7998-3:2002, IEC 60027-3:2002. Letter symbols to be used in electrical technology. Logarithmic and related quantities, and their units
BS EN 14360:2004 BS EN 14360:2004. Protective clothing against rain. Test method for ready made garments. Impact from above with high energy droplets
BS EN 13600:2002 BS EN 13600:2002. Copper and copper alloys. Seamless copper tubes for electrical purposes
BS EN 13601:2002 BS EN 13601:2002. Copper and copper alloys. Copper rod, bar and wire for general electrical purposes
BS EN 13602:2002 BS EN 13602:2002. Copper and copper alloys. Drawn, round copper wire for the manufacture of electrical conductors
BS EN 13603:2002 BS EN 13603:2002. Copper and copper alloys. Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
BS EN 1503-4:2002 BS EN 1503-4:2002. Valves. Materials for bodies, bonnets and covers. Copper alloys specified in European Standards
BS EN 61076-3-104:2003 BS EN 61076-3-104:2003. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors. Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 600 MHz minimum
BS EN 12847:2002, BS 2000-485:2003 BS EN 12847:2002, BS 2000-485:2003. Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of settling tendency of bitumen emulsions
BS EN 12849:2002, BS 2000-487:2003 BS EN 12849:2002, BS 2000-487:2003. Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of penetration power of bitumen emulsions
BS EN 13774:2003 BS EN 13774:2003. Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements
03/110340 DC 03/110340 DC. BS EN 131-2. Ladders. Part 2. Requirements, testing, marking
ISO/IECTR15938-8 : 2002 EDTN 1 ISO/IECTR15938-8 : 2002 EDTN 1. ISO/IECTR15938-8 : 2002 Information technology- Multimedia content description interface. Part 8: Extraction and use of MPEG-7 descriptions
WD/ISO/IECTR14496-7 : 2002EDTN1 WD/ISO/IECTR14496-7 : 2002EDTN1. ISO/IECTR14496-7 : 2002 Information technology- Coding of audio-visual objects. Part 7: Optimised reference software for coding of audio-visual objects
BS ISO 13472-1:2002 BS ISO 13472-1:2002. Acoustics. Measurement of sound absorption properties of road surfaces in situ. Extended surface method
BS EN 61386-21:2004 BS EN 61386-21:2004. Conduit systems for cable management. Particular requirements. Rigid conduit systems
BS EN 61386-22:2004 BS EN 61386-22:2004. Conduit systems for cable management. Particular requirements. Pliable conduit systems
BS EN 61386-23:2004 BS EN 61386-23:2004. Conduit systems for cable management. Particular requirements. Flexible conduit systems
BS EN 3746:2003 BS EN 3746:2003. Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Hardness 80 IRHD
BS EN 3747:2003 BS EN 3747:2003. Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Technical specification
BS EN 3869:2003 BS EN 3869:2003. Aerospace series. Pipe couplings, loose flanges and seals. Seals in fluorocarbon rubber and armature in aluminium alloy
BS ISO 22702:2003 BS ISO 22702:2003. Utility lighters. General consumer-safety requirements
BS EN 13564-1:2002 BS EN 13564-1:2002. Anti-flooding devices for buildings. Requirements
BS EN 13463-8:2003 BS EN 13463-8:2003. Non-electrical equipment for potentially explosive atmospheres. Protection by liquid immersion 'k'
ISO/IEC7816-9 : 2004 EDTN2 ISO/IEC7816-9 : 2004 EDTN2. ISO/IEC7816-9 : 2004 Identification cards -- Integrated cicuit cards --. Part 9: Commands for card management
BS ISO 22643:2003 BS ISO 22643:2003. Space data and information transfer systems. Data entity dictionary specification language (DEDSL). XML/DTD Syntax
BS ISO 17355:2003 BS ISO 17355:2003. Space data and information transfer systems. CCSDS file delivery protocol
BS ISO 13419:2003 BS ISO 13419:2003. Space data and information transfer systems. Packet telemetry
BS ISO 12174:2003 BS ISO 12174:2003. Space data and information transfer systems. Telecommand. Architectural specification for the data management service
BS ISO 12173:2003 BS ISO 12173:2003. Space data and information transfer systems. Telecommand. Command operation procedures
BS ISO 12172:2003 BS ISO 12172:2003. Space data and information transfer systems. Telecommand. Data routing service
BS ISO 11754:2003 BS ISO 11754:2003. Space data and information transfer systems. Telemetry channel coding
BS ISO 17433:2003 BS ISO 17433:2003. Space data and information transfer systems. Packet telemetry services
BS EN 140401:2002 BS EN 140401:2002. Blank detail specification. Fixed low power non wire-wound surface mount (SMD) resistors
BS EN 10031:2003 BS EN 10031:2003. Semi finished products for forging. Tolerances on dimensions shape and mass
BS ISO 3977-4:2002 BS ISO 3977-4:2002. Gas turbines. Procurement. Fuels and environment
ISO/IEC7816-8 : 2004 EDTN2 ISO/IEC7816-8 : 2004 EDTN2. ISO/IEC 7816-8 : 2004 Identification cards -- Integrated circuit cards --. Part 8: Commands for security operaations
BS ISO 17101:2004 BS ISO 17101:2004. Agricultural machinery. Rotary and flail mowers. Thrown-object test and acceptance criteria
BS EN 12201-4:2001 BS EN 12201-4:2001. Plastic piping systems for water supply. Polyethylene (PE). Valves
BS ISO/IEC 20968:2002 BS ISO/IEC 20968:2002. Software engineering. Mk II function point analysis. Counting practices manual
ISO/IEC7816-6 : 2004 EDTN 2 ISO/IEC7816-6 : 2004 EDTN 2. ISO/IEC7816-6 : 2004 Identification cards - Integrated circuit cards. Part 6: Interindustry data elements for interchange
ISO/IEC8824-1 : 2002 EDTN3 ISO/IEC8824-1 : 2002 EDTN3. ISO/IEC 8824-1 : 2003 EDTN3 Information technology - Abstract syntax notation one (ASN.1). Part 1: Specification of Basic Notation (ITU-T X.680)
ISO/IEC8824-2 : 2002 EDTN3 ISO/IEC8824-2 : 2002 EDTN3. ISO/IEC 8824-2 : 2003 EDTN3 Information technology - Abstract syntax notation one (ASN.1). Part 2: Information Object Specification (ITU-T X.681)
ISO/IEC8824-3 : 2003 EDTN3 ISO/IEC8824-3 : 2003 EDTN3. ISO/IEC 8824-3 : 2003 EDTN 3 Information technology - Abstract syntax notation one (ASN.1) . Part 3: Constraint Specification (ITU-T X.682)
ISO/IEC8824-4 : 2002 EDTN3 ISO/IEC8824-4 : 2002 EDTN3. ISO/IEC 8824-4 : 2003 EDTN 3 Information technology - Abstract syntax notation one (ASN.1). Part 4: Parameterization of ASN.1 Specifications (ITU-T X.683)
ISO/IEC8825-1 : 2002 EDTN 3 ISO/IEC8825-1 : 2002 EDTN 3. ISO/IEC 8825-1: EDITION 3 Information technology - ASN.1 Encoding Rules. Part 1: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) (ITU-T X.690)
ISO/IEC8825-2 : 2002 EDTN3 ISO/IEC8825-2 : 2002 EDTN3. ISO/IEC 8825-2 : 2003 Information technology - ASN.1 Encoding Rules. Part 2: Specification of Packed Encoding Rules (PER) (ITU-T X.691)
BS EN 12642:2001 BS EN 12642:2001. Securing of cargo on road vehicles. Body structure of commercial vehicles. Minimum requirements
BS ISO 2939:2002 BS ISO 2939:2002. Cinematography. Picture image area on 35 mm motion-picture release prints. Position and dimensions
ISO10383 : 2003 EDTN 2 ISO10383 : 2003 EDTN 2. ISO10383 : 2003 Securities and related financial instruments- Codes for exchanges and market identification (MIC)
BS ISO 16820:2004 BS ISO 16820:2004. Sensory analysis. Methodology. Sequential analysis
BS 8420:2003 BS 8420:2003. Methods of measuring irregularities on surfaces of roads, footways and other paved areas using straightedges and wedges
BS EN 480-13:2002 BS EN 480-13:2002. Admixtures for concrete, mortar and grout. Test methods. Reference masonry mortar for testing mortar admixtures
BS EN ISO 8256:2004 BS EN ISO 8256:2004. Plastics. Determination of tensile-impact strength
BS EN 140400:2003 BS EN 140400:2003. Harmonized system of quality assessment for electronic components. Sectional specification. Fixed low power surface mount (SMD) resistors
ISO/IEC9995-2 : 2002 EDTN 2 ISO/IEC9995-2 : 2002 EDTN 2. ISO/IEC9995-2 : 2002 Information technology -- Keyboard layouts for text and office systems --. Part 2: Alphanumeric section
BS EN 61514-2:2004 BS EN 61514-2:2004. Industrial process control systems. Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs
BS 4164:2002 BS 4164:2002. Specification for coal-tar-based hot-applied coating materials for protecting iron and steel, including a suitable primer
ISO/IEC9995-4 : 2002 EDTN 2 ISO/IEC9995-4 : 2002 EDTN 2. ISO/IEC9995-4 : 2002 Information technology -- Keyboard layouts for text and office systems --. Part 4: Numeric section
BS EN 14385:2004 BS EN 14385:2004. Stationary source emissions. Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
BS EN 60873-2:2004 BS EN 60873-2:2004. Electrical and pneumatic analogue chart recorders for use in industrial process control systems. Guidance for inspection and routine testing
BS EN 61003-1:2004 BS EN 61003-1:2004. Industrial-process control systems. Instruments with analogue inputs and two- or multi-state outputs. Methods of evaluating performance
ISO/IEC9995-3 : 2002 EDTN 2 ISO/IEC9995-3 : 2002 EDTN 2. ISO/IEC9995-3 : 2002 Information technology -- Keyboard layouts for text and office systems --. Part 3: Complementary layouts of the alphanumeric zone of the alphanumeric section
BS EN 12789:2002 BS EN 12789:2002. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure. Determination of flexural strength
ISO/IEC22050 : 2002 EDTN 1 ISO/IEC22050 : 2002 EDTN 1. ISO/IEC 22050 Information technology- Data interchange on 12,7 mm, 384-track magnetic tape cartridges -- Ultrium-1 format
ISO/IEC22051 : 2002 EDTN 1 ISO/IEC22051 : 2002 EDTN 1. ISO/IEC22051 : 2002 Information technology- Data interchange on 12,7 mm, 448-track magnetic tape cartridges- SDLT1 format
BS EN 13349:2002 BS EN 13349:2002. Copper and copper alloys. Pre-insulated copper tubes with solid covering
BS EN 13604:2002 BS EN 13604:2002. Copper and copper alloys. Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications
BS EN 13806:2002 BS EN 13806:2002. Foodstuffs. Determination of trace elements. Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after pressure digestion
BS EN 45510-4-4:2002 BS EN 45510-4-4:2002. Guide for the procurement of power station equipment. Boiler auxiliaries. Fuel preparation equipment
BS EN 45510-4-5:2002 BS EN 45510-4-5:2002. Guide for the procurement of power station equipment. Boiler auxiliaries. Coal handling and bulk storage plant
DD ENV 623-5:2002 DD ENV 623-5:2002. Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of phase volume fraction by evaluation of micrographs
BS EN 13286-49:2004 BS EN 13286-49:2004. Unbound and hydraulically bound mixtures. Accelerated swelling test for soil treated by lime and/or hydraulic binder
BS EN 13377:2002 BS EN 13377:2002. Prefabricated timber formwork beams. Requirements, classification and assessment
BS ISO 4725:2004 BS ISO 4725:2004. Oil of cedarwood, Texas (Juniperus mexicana Schiede)
BS EN ISO 12216:2002 BS EN ISO 12216:2002. Small craft. Windows, portlights, hatches, deadlights and doors. Strength and watertightness requirements
BS EN 1639:2004 BS EN 1639:2004. Dentistry. Medical devices for dentistry. Instruments
BS EN 61920:2004 BS EN 61920:2004. Infrared free air applications
BS EN 1640:2004 BS EN 1640:2004. Dentistry. Medical devices for dentistry. Equipment
BS EN 1641:2004 BS EN 1641:2004. Dentistry. Medical devices for dentistry. Materials
BS EN 1642:2004 BS EN 1642:2004. Dentistry. Medical devices for dentistry. Dental implants
BS ISO/IEC 23270:2003 BS ISO/IEC 23270:2003. Information technology. C# Language Specification
BS 4213:2004 BS 4213:2004. Cisterns for domestic use. Cold water storage and combined feed and expansion (thermoplastic) cisterns up to 500 l. Specification
03/522467 DC 03/522467 DC. ISO 18773. Securities and related financial instruments. Abbreviations
03/522468 DC 03/522468 DC. ISO 18774. Securities related financial instruments. Finanical instruments short description (FISN)
BS ISO 787-17:2002 BS ISO 787-17:2002. General methods of test for pigments and extenders. Comparison of lightening power of white pigments
BS EN 2591-507:2002 BS EN 2591-507:2002. Elements of electrical and optical connection. Test methods. Plating porosity
BS EN 12697-38:2004 BS EN 12697-38:2004. Bituminous mixtures. Test methods for hot mix asphalt. Test equipment and calibration
BS EN 12312-13:2002 BS EN 12312-13:2002. Aircraft ground support equipment. Specific requirements. Lavatory service equipment
BS ISO 8548-5:2003 BS ISO 8548-5:2003. Prosthetics and orthotics. Limb deficiencies. Description of the clinical condition of the person who has had an amputation
ISO16853 : 2003 EDTN 1 ISO16853 : 2003 EDTN 1. ISO16853 : 2003 Textile machinery - Sliver cans, rectangular - Main dimensions and tolerances
BS ISO 8551:2003 BS ISO 8551:2003. Prosthetics and orthotics. Functional deficiencies. Description of the person to be treated with an orthosis, clinical objectives of treatment, and functional requirements of the orthosis
BS EN 13074:2002, BS 2000-493:2002 BS EN 13074:2002, BS 2000-493:2002. Methods of test for petroleum and its products. Petroleum products. Bitumen and bituminous binders. Recovery of binder from bitumen emulsions by evaporation
BS ISO/IEC 13249-1:2002 BS ISO/IEC 13249-1:2002. Information technology. Database languages. SQL multimedia and application packages. Framework
BS EN 13075-1:2002, BS 2000-494:2002 BS EN 13075-1:2002, BS 2000-494:2002. Methods of test for petroleum and its products. Determination of breaking value of cationic bitumen emulsions, mineral filler method
BS EN 13075-2:2002, BS 2000-495:2002 BS EN 13075-2:2002, BS 2000-495:2002. Methods of test for petroleum and its products. Determination of fines mixing time of cationic bitumen emulsions
BS EN 1437:2002 BS EN 1437:2002. Plastics piping systems. Piping systems for underground drainage and sewerage. Test method for resistance to combined temperature cycling and external loading
BS EN 12354-6:2003 BS EN 12354-6:2003. Building acoustics. Estimation of acoustic performance of buildings from the performance of elements. Sound absorption in enclosed spaces
PD CR 12952-17:2002 PD CR 12952-17:2002. Water boilers and auxiliary installations. Guidelines for the involvement of an inspection body independent of the manufacturer
PD CR 12953-14:2002 PD CR 12953-14:2002. Shell boilers. Guideline for involvement of an inspection body independent the manufacturer
ISO/IEC22091 : 2002 EDTN 1 ISO/IEC22091 : 2002 EDTN 1. ISO/IEC22091 : 2002 Information technology- Streaming Lossless Data Compression Algorithm (SLDC)
ISO636 : 2004 EDTN 3 ISO636 : 2004 EDTN 3. ISO636 : 2004 Welding consumables - Rods, wires, deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification
BS EN 1062-6:2002 BS EN 1062-6:2002. Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Determination of carbon dioxide permeability
BS EN 1062-11:2002 BS EN 1062-11:2002. Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Methods of conditioning before testing
BS EN ISO 14557:2002 BS EN ISO 14557:2002. Fire-fighting hoses. Rubber and plastics suction hoses and hose assemblies
PD CEN ISO/TR 11610:2004 PD CEN ISO/TR 11610:2004. Protective clothing. Vocabulary
BS EN ISO 11064-4:2004 BS EN ISO 11064-4:2004. Ergonomic design of control centres. Layout and dimensions of workstations
DD ENV 14236:2002 DD ENV 14236:2002. Ultrasonic domestic gas meters
BS EN 13523-8:2002 BS EN 13523-8:2002. Coil coated metals. Test methods. Resistance to salt spray (fog)
BS ISO 125:2003 BS ISO 125:2003. Natural rubber latex concentrate. Determination of alkalinity
BS EN 1073-2:2002 BS EN 1073-2:2002. Protective clothing against radioactive contamination. Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination
BS EN 60862-3:2003 BS EN 60862-3:2003. Surface acoustic wave (SAW) filters of assessed quality. Standard outlines
BS 5176:2003 BS 5176:2003. Classification system for vulcanized rubbers. Specification
BS 8422:2003 BS 8422:2003. Force measurement. Strain gauge load cell systems. Calibration method
PD IEC/TR 61000-2-8:2002 PD IEC/TR 61000-2-8:2002. Electromagnetic compatibility (EMC). Environment. Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
BS 5191:2004 BS 5191:2004. Production planning and control. Vocabulary
BS EN 13748-2:2004 BS EN 13748-2:2004. Terrazzo tiles. Terrazzo tiles for external use
PD ISO/TR 14062:2002 PD ISO/TR 14062:2002. Environmental management. Integrating environmental aspects into product design and development
PD ISO/IEC TR 19760:2003 PD ISO/IEC TR 19760:2003. Systems engineering. A guide for the application of ISO/IEC 15288 (System life cycle processes)
WD/ISO/TS22763 : 2002 EDTN 1 WD/ISO/TS22763 : 2002 EDTN 1. ISO/TS22763 : 2002 Crop protection equipment- Sprayers Demonstration track for field crop sprayers
BS EN 14259:2003 BS EN 14259:2003. Adhesives for floor covering. Requirements for mechanical and electrical performance
BS EN ISO 15908:2002 BS EN ISO 15908:2002. Adhesives for thermoplastic piping systems. Test method for the determination of thermal stability of adhesives
BS EN 601:2004 BS EN 601:2004. Aluminum and aluminium alloys. Castings. Chemical composition of castings for use in contact with foodstuff
BS EN 602:2004 BS EN 602:2004. Aluminium and aluminium alloys. Wrought products. Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff
DD ENV 13381-2:2002 DD ENV 13381-2:2002. Test methods for determining the contribution to the fire resistance of structural members. Vertical protective membranes
DD ENV 13381-3:2002 DD ENV 13381-3:2002. Test methods for determining the contribution to the fire resistance of structural members. Applied protection to concrete members
DD ENV 13381-4:2002 DD ENV 13381-4:2002. Test methods for determining the contribution to the fire resistance of structural members. Applied protection to steel members
DD ENV 13381-5:2002 DD ENV 13381-5:2002. Test methods for determining the contribution to the fire resistance of structural members. Applied protection to concrete/profiled sheet composite members
DD ENV 13381-6:2002 DD ENV 13381-6:2002. Test methods for determining the contribution to the fire resistance of structural members. Applied protection to concrete filled hollow steel columns
DD ENV 13381-7:2002 DD ENV 13381-7:2002. Test methods for determining the contribution to the fire resistance of structural members. Applied protection to timber members
PD IEC TR 62316:2003 PD IEC TR 62316:2003. Guidance for the interpretation of OTDR backscattering traces
BS EN 60191-6-12:2002 BS EN 60191-6-12:2002. Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages. Design guide for fine-pitch land grid array (FLGA). Rectangular type
BS EN 60793-1-41:2003 BS EN 60793-1-41:2003. Optical fibres. Measurement methods and test procedures. Bandwidth
BS EN ISO 3175-3:2003 BS EN ISO 3175-3:2003. Textiles. Dry cleaning and finishing. Procedure for testing performance when cleaning and finishing using hydrocarbon solvent
PD IEC TR 61292-3:2003 PD IEC TR 61292-3:2003. Optical amplifiers. Classification, characteristics and applications
BS EN ISO 3175-4:2003 BS EN ISO 3175-4:2003. Textiles. Dry cleaning and finishing. Procedure for testing performance when cleaning and finishing using simulated wetcleaning
BS ISO 9735-1:2002 BS ISO 9735-1:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Syntax rules common to all parts
BS EN ISO 13936-1:2004 BS EN ISO 13936-1:2004. Textiles. Determination of the slippage resistance of yarns at a seam in woven fabrics. Fixed seam opening method
BS ISO 9735-2:2002 BS ISO 9735-2:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Syntax rules specific to batch EDI
BS ISO 9735-3:2002 BS ISO 9735-3:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Syntax rules specific to interactive EDI
BS ISO 9735-4:2002 BS ISO 9735-4:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Syntax and service report message for batch EDI (message type - CONTRL)
BS ISO 9735-6:2002 BS ISO 9735-6:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Secure authentication and acknowledgement message (message type AUTACK)
BS ISO 9735-5:2002 BS ISO 9735-5:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Security rules for batch EDI (authenticity, integrity and non-repudiation of origin)
BS ISO 9735-7:2002 BS ISO 9735-7:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Security rules for batch EDI (confidentiality)
BS ISO 9735-10:2002 BS ISO 9735-10:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Syntax service directories
BS ISO 9735-8:2002 BS ISO 9735-8:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Associated data in EDI
BS ISO 9735-9:2002 BS ISO 9735-9:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Security key and certificate management message (message type KEYMAN)
BS 3837-1:2004 BS 3837-1:2004. Expanded polystyrene boards. Boards and blocks manufactured from expandable beads. Requirements and test methods
BS ISO 9261:2003 BS ISO 9261:2003. Agricurltural irrigation equipment. Emitters and emitting pipe. Specification and test methods
DD IEC TS 62239:2003 DD IEC TS 62239:2003. Process management for avionics. Preparation of an electronic components management plan
BS EN ISO 9311-2:2002 BS EN ISO 9311-2:2002. Adhesives for thermoplastic piping systems. Determination of shear strength
BS ISO 7206-4:2002 BS ISO 7206-4:2002. Implants for surgery. Partial and total hip joint prostheses. Determination of endurance properties of stemmed femoral components
BS EN 60079-0:2004 BS EN 60079-0:2004. Electrical apparatus for explosive gas atmospheres. General requirements
ISO/IEC14776-326 : 2002 EDTN 1 ISO/IEC14776-326 : 2002 EDTN 1. ISO/IEC14776-326 : 2002 Information technology Small Computer System Interface (SCSI). Part 326: Reduced Block Commands (RBC)
ISO/IEC14776-331 : 2002 EDTN.1 ISO/IEC14776-331 : 2002 EDTN.1. ISO/IEC 14776-331 Information technology - Small Computer System Interface (SCSI). Part 331: Stream Commands (SSC)
ISO/IEC23289 : 2002 EDTN 1 ISO/IEC23289 : 2002 EDTN 1. ISO/IEC23289 : 2002 Information technology- Telecommunications and information exchange between systems- Corporate telecommunication networks- Signalling i nterworking between QSIG and H.323 - Basic services
WD/ISO/IEC23290 : 2002 EDTN 1 WD/ISO/IEC23290 : 2002 EDTN 1. ISO/IEC23290 : 2002 Information technology- Telecommunications and information exchange between systems - Private Integrated Services Network- Mapping functions for the tunnelling of QSIG through H.323 networks
BS EN ISO 604:2003 BS EN ISO 604:2003. Plastics. Determination of compressive properties
BS EN ISO 3167:2003 BS EN ISO 3167:2003. Plastics. Multipurpose test specimens
BS EN 60695-11-2:2003 BS EN 60695-11-2:2003. Fire hazard testing. Test flames. 1 kW nominal pre-mixed flame. Apparatus, confirmatory test arrangement and guidance
DD IEC TS 60695-2-20:2004 DD IEC TS 60695-2-20:2004. Fire hazard testing. Glowing/hot wire based test methods. Hot-wire coil ignitability. Apparatus, test method and guidance
BS EN 50174-3:2003 BS EN 50174-3:2003. Installation technology. Cabling installation. Installation planning and practices outside buildings
BS EN 756:2004 BS EN 756:2004. Welding consumables. Solid wires, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels. Classification
BS EN 12758:2002 BS EN 12758:2002. Glass in building. Glazing and airborne sound insulation. Product descriptions and determination of properties
ISO18286 : 2004 EDTN.1 ISO18286 : 2004 EDTN.1. ISO18286 : 2004 Hot-rolled stainless steel plates - Tolerances on dimensions and shape
PD CISPR/TR 31:2003 PD CISPR/TR 31:2003. Database on the characteristics of radio services
BS EN ISO 10418:2003 BS EN ISO 10418:2003. Petroleum and natural gas industries. Offshore production installations. Basic surface process safety systems
BS EN ISO 10438-1:2003 BS EN ISO 10438-1:2003. Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries. General requirements
ISO/TR9564-4 : 2004 EDTN.1 ISO/TR9564-4 : 2004 EDTN.1. ISO/TR9564-4 : 2004 Banking -- Personal Identification Number (PIN) management and security -. Part 4: Guidelines for PIN handling in open networks
BS EN 14398-1:2003 BS EN 14398-1:2003. Cryogenic vessels. Large transportable non-vacuum insulated vessels. Fundamental requirements
PD IEC TR 61292-2:2003 PD IEC TR 61292-2:2003. Optical amplifier technical reports. Theoretical background for noise figure evaluation using the electrical spectrum analyzer
BS EN ISO 14692-1:2002 BS EN ISO 14692-1:2002. Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. Vocabulary, symbols, applications and materials
ISO/IEC23651 : 2003 EDTN 1 ISO/IEC23651 : 2003 EDTN 1. ISO/IEC23651 : 2003 Information technology- 8 mm wide magnetic tape cartridge for information interchange- Helical scan recording AIT-3 format
BS EN ISO 16812:2003 BS EN ISO 16812:2003. Petroleum and natural gas industries. Shell-and-tube heat exchangers
BS 7990:2003 BS 7990:2003. Tube furnace method for the determination of toxic product yields in fire effluents
ISO/IEC13869 : 2003 EDTN.2 ISO/IEC13869 : 2003 EDTN.2. ISO/IEC13869 : 2003 Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Inter-exchange signalling protocol - Call transfer supplementary service
ISO/IEC14846 : 2003 EDTN 2 ISO/IEC14846 : 2003 EDTN 2. ISO/IEC14846 : 2003 Information technology- Telecommunications and information exchange between systems- Private Integrated Services Network - Inter-exchange signalling protocol- Call intrusion supplementary service
ISO/IEC13873 : 2003 EDTN 1 ISO/IEC13873 : 2003 EDTN 1. ISO/IEC13873 : 2003 Information technology- Telecommunications and information exchange between systems- Private Integrated Services Network- Inter-exchange signalling protocol- Call diversion supplementary services
ISO/IEC14843 : 2003 EDTN 2 ISO/IEC14843 : 2003 EDTN 2. ISO/IEC14843 : 2003 Information technology- Telecommunications and information exchange between systems- Private Integrated Services Network- Inter- exchange signalling protocol- Call offer supplementary service
BS EN ISO 13936-2:2004 BS EN ISO 13936-2:2004. Textiles. Determination of the slippage resistance of yarns at a seam in woven fabrics. Fixed load method
ISO/IEC17878 : 2003 EDTN 2 ISO/IEC17878 : 2003 EDTN 2. ISO/IEC17878 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Inter- exchange signalling protocol -- Private User Mobility (PUM) -- Call handling additional network features
ISO/IEC17876 : 2003 EDTN 2 ISO/IEC17876 : 2003 EDTN 2. ISO/IEC17876 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Inter-exchange signalling protocol -- Private User Mobility (PUM) -- Registration supplementary service
ISO/IEC15992 : 2003 EDTN 2 ISO/IEC15992 : 2003 EDTN 2. ISO/IEC15992 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Inter-exchange signalling protocol -- Call Priority Interruption and Call Priority Interruption Protection supplementary services
ISO/IEC15991 : 2003 EDTN 2 ISO/IEC15991 : 2003 EDTN 2. ISO/IEC15991 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Specification, functional model and information flows -- Call Priority Interruption and Call Priority Interruption Protection supplementary services
ISO/IEC15772 : 2003 EDTN 2 ISO/IEC15772 : 2003 EDTN 2. ISO/IEC15772 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Inter-exchange signalling protocol -- Common Information additional network feature
ISO/IEC15433 : 2003 EDTN 2 ISO/IEC15433 : 2003 EDTN 2. ISO/IEC15433 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Inter-exchange signalling protocol -- Wireless Terminal Authentication supplementary services
ISO/IEC15431 : 2003 EDTN 2 ISO/IEC15431 : 2003 EDTN 2. ISO/IEC15431 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Inter-exchange signalling protocol -- Wireless terminal call handling additional network features
ISO/IEC13868 : 2003 EDTN.2 ISO/IEC13868 : 2003 EDTN.2. ISO/IEC13868 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Inter-exchange signalling protocol -- Name identification supplementary services
ISO/IEC13865 : 2003 EDTN 2 ISO/IEC13865 : 2003 EDTN 2. ISO/IEC13865 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Specification, functional model and information flows -- Call transfer supplementary service
ISO/IEC19460 : 2003 EDTN 2 ISO/IEC19460 : 2003 EDTN 2. ISO/IEC19460 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Inter-exchange signalling protocol -- Single Step Call Transfer Supplementary Service
ISO/IEC15054 : 2003 EDTN 2 ISO/IEC15054 : 2003 EDTN 2. ISO/IEC15054 : 2003 Information technology- Telecommunications and information exchange between systems- Private Integrated Services Network -- Inter-exchange signalling protocol -- Call interception additional network feature
ISO/IEC15053 : 2003 EDTN 2 ISO/IEC15053 : 2003 EDTN 2. ISO/IEC15053 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Specification, functional model and information flows -- Call interception additional network feature
ISO/IEC15051 : 2003 EDTN 2 ISO/IEC15051 : 2003 EDTN 2. ISO/IEC15051 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Specification, functional model and information flows -- Recall supplementary service
ISO/IEC15050 : 2003 EDTN 2 ISO/IEC15050 : 2003 EDTN 2. ISO/IEC15050 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Inter-exchange signalling protocol -- Advice of charge supplementary services
ISO/IEC15506 : 2003 EDTN 2 ISO/IEC15506 : 2003 EDTN 2. ISO/IEC15506 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Inter-exchange signalling protocol -- Message Waiting Indication supplementary service
ISO/IEC15505 : 2003 EDTN 3 ISO/IEC15505 : 2003 EDTN 3. ISO/IEC15505 : 2003 Information technology- Telecommunications and information exchange between systems- Private Integrated Services Network- Specification, Functional Model and Information Flows- Message Waiting Indication supplementary service
ISO8061 : 2004 EDTN.3 ISO8061 : 2004 EDTN.3. ISO8061 : 2004 Alpine ski-bindings - Selection of release torque values
BS EN ISO 11403-2:2004 BS EN ISO 11403-2:2004. Plastics. Acquisition and presentation of comparable multipoint data. Thermal and processing properties
04/30068987 DC 04/30068987 DC. ISO/DIS 19702. Analysis of fire gases using Fourier infra-red technique (FTIR)
BS EN 60728-6:2003 BS EN 60728-6:2003. Cable networks for television signals, sound signals and interactive services. Optical equipment
BS ISO 12214:2002 BS ISO 12214:2002. Road vehicles. Direction-of-motion stereotypes for automotive hand controls
BS EN 60695-1-30:2002 BS EN 60695-1-30:2002. Fire hazard testing. Guidance for assessing fire hazard of electrotechnical products. Use of preselection testing procedures
BS EN ISO 19953:2004 BS EN ISO 19953:2004. Footwear. Test methods for heels. Resistance to lateral impact
BS ISO 8122:2003 BS ISO 8122:2003. Textile machinery. Knitting machines. Number of needles for circular knitting machines of large nominal diameter
BS ISO 8117:2003 BS ISO 8117:2003. Textile machinery. Knitting machines. Nominal diameters of circular machines
ISO16100-2 : 2003 EDTN 1 ISO16100-2 : 2003 EDTN 1. ISO16100-2 : 2003 Industrial automation systems and integration - Manufacturing software capability profiling - . Part 2: Profiling methodology
ISO/IEC13870 : 2003 EDTN 3 ISO/IEC13870 : 2003 EDTN 3. ISO/IEC13870 : 2003 Information technology- Telecommunications and information exchange between systems- Private Integrated Services Network-Inter-exchange signalling protocol- Call completion supplementary services
BS 8888:2002 BS 8888:2002. Technical product documentation (TPD). Specification for defining, specifying and graphically representing products
ISO/IEC13872 : 2003 EDTN 2 ISO/IEC13872 : 2003 EDTN 2. ISO/IEC13872 : 2003 Information technology- Telecommunications and Information exchange between systems- Private Integrated Services Network- Specification, functional model and information flows- Call diversion supplementary services
ISO/IEC14844 : 2003 EDTN 2 ISO/IEC14844 : 2003 EDTN 2. ISO/IEC14844 : 2003 Information technology- Telecommunications and Information exchange between systems- Private Integrated Services Network- Do not disturb and do not disturb override supplementary services
DD 16792:2002 DD 16792:2002. Technical product documentation (TPD). Digital product definition data practices
ISO/IEC15052 : 2003 EDTN 2 ISO/IEC15052 : 2003 EDTN 2. ISO/IEC15052 : 2003 Information technology- Telecommunications and Information exchange between systems- Private Integrated Services Network- Inter-exchange signalling protocol- Recall supplementary service
ISO/IEC15429 : 2003 EDTN 2 ISO/IEC15429 : 2003 EDTN 2. ISO/IEC15429 : 2003 Information technology- Telecommunications and information exchange between systems- Private Integrated Services Network - Inter-exchange signalling protocol- Wireless Terminal Location Registration supplementary service and Wireless Terminal Information exchange additional network feature
BS ISO/IEC TR 15947:2002 BS ISO/IEC TR 15947:2002. Information technology. Security techniques. IT intrusion detection framework
BS EN 60749-14:2003 BS EN 60749-14:2003. Semiconductor devices. Mechanical and climatic test methods. Robustness of terminations (lead integrity)
BS EN 60749-25:2003 BS EN 60749-25:2003. Semiconductor devices. Mechanical and climatic test methods. Temperature cycling
BS EN 60684-3-240 to 243:2002 BS EN 60684-3-240 to 243:2002. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Heat-shrinkable PTFE sleeving
BS EN 60684-3-300:2002 BS EN 60684-3-300:2002. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Glass textile fibre sleeving, braided, uncoated
BS EN 13723:2002, BS 2000-489:2002 BS EN 13723:2002, BS 2000-489:2002. Methods of test for petroleum and its products. Petroleum products. Determination of low lead contents in gasolines. Wavelength-dispersive X-ray fluorescence spectrometry (XRF)
BS EN 61207-3:2002 BS EN 61207-3:2002. Expression of performance of gas analyzers. Paramagnetic oxygen analyzers
BS EN 60684-3-320:2002 BS EN 60684-3-320:2002. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Polyethylene terephthalate textile sleeving, lightly impregnated. Sheet 320: Polyethylene terephthalate textile sleeving, lightly impregnated
BS EN 61000-2-4:2002 BS EN 61000-2-4:2002. Electromagnetic compatibility (EMC). Environment. Compatibility levels in industrial plants for low-frequency conducted disturbances
BS EN 10326:2004 BS EN 10326:2004. Continuously hot-dip coated strip and sheet of structural steels. Technical delivery conditions
BS EN 10327:2004 BS EN 10327:2004. Continuously hot-dip coated strip and sheet of low carbon steels for cold forming. Technical delivery conditions
DD IEC TS 61994-1:2003 DD IEC TS 61994-1:2003. Piezoelectric and dielectric devices for frequency control and selection. Glossary. Piezoelectric and dielectric resonators
BS ISO 21389:2004 BS ISO 21389:2004. Oil of gum turpentine, Chinese (mainly from Pinus massoniana Lamb.)
DD CEN/TS 14235:2002 DD CEN/TS 14235:2002. Materials and articles in contact with foodstuffs. Polymeric coatings on metal substrates. Guide to the selection of conditions and test methods for overall migration
DD CEN/TS 14234:2002 DD CEN/TS 14234:2002. Materials and articles in contact with foodstuffs. Polymeric coatings on paper and board. Guide to the selection of conditions and test methods for overall migration
BS EN 12260:2003, BS 6068-2.83:2003 BS EN 12260:2003, BS 6068-2.83:2003. Water quality. Determination of nitrogen. Determination of bound nitrogen (TNb), following oxidation to nitrogen oxides
BS EN 13258:2003 BS EN 13258:2003. Materials and articles in contact with foodstuffs. Test methods for crazing resistance of ceramic articles
BS EN 14419:2003 BS EN 14419:2003. District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Surveillance systems
BS EN 62134-1:2002 BS EN 62134-1:2002. Fibre optic enclosures. Generic specification
BS EN 60794-3-10:2002 BS EN 60794-3-10:2002. Optical fibre cables. Outdoor cables. Family specification for duct and directly buried optical telecommunication cables
BS EN 60794-3-20:2002 BS EN 60794-3-20:2002. Optical fibre cables. Outdoor cables. Family specification for optical self-supporting aerial telecommunication cables
BS EN 14413-1:2004 BS EN 14413-1:2004. Recreational diving services. Safety related minimum requirements for the training of scuba instructors. Level 1
DD CLC/TS 62081:2002 DD CLC/TS 62081:2002. Arc welding equipment. Installation and use
BS EN ISO 4590:2003 BS EN ISO 4590:2003. Rigid cellular plastics. Determination of the volume percentage of open cells and of closed cells
BS EN ISO 15025:2002 BS EN ISO 15025:2002. Protective clothing. Protection against heat and flame. Method of test for limited flame spread
BS EN 60745-2-12:2003 BS EN 60745-2-12:2003. Hand-held motor-operated electric tools. Safety. Particular requirements for concrete vibrators
DD ENV 1071-6:2002 DD ENV 1071-6:2002. Advanced technical ceramics. Methods of test for ceramic coatings. Determination of the abrasion resistance of coatings by a micro-abrasion wear test
BS ISO 21961:2003 BS ISO 21961:2003. Space data and information transfer systems. Data entity dictionary specification language (DEDSL). Abstract syntax
BS ISO 21962:2003 BS ISO 21962:2003. Aerospace series. Space data and information transfer systems. Data entity dictionary specification language (DEDSL). PVL syntax
BS ISO 15889:2003 BS ISO 15889:2003. Space data and information transfer systems. Data description language. EAST specification
BS ISO 8179-1:2004 BS ISO 8179-1:2004. Ductile iron pipes. External zinc-based coating. Metallic zinc with finishing layer
BS ISO/IEC 24703:2004 BS ISO/IEC 24703:2004. Information technology. Participant identifiers
BS 5950-8:2003 BS 5950-8:2003. Structural use of steelwork in building. Code of practice for fire resistant design
BS EN 62021-1:2003 BS EN 62021-1:2003. Insulating liquids. Determination of acidity. Automatic potentiometric titration
BS EN 14368:2003 BS EN 14368:2003. Products used for treatment of water intended for human consumption. Manganese dioxide coated limestone
BS EN 14369:2003 BS EN 14369:2003. Products used for treatment of water intended for human consumption. Iron-coated granular activated alumina
BS EN 10295:2002 BS EN 10295:2002. Heat resistant steel castings
BS EN 1015-18:2002 BS EN 1015-18:2002. Methods of test for mortar for masonry. Determination of water absorption coefficient due to capillary action of hardened mortar
BS EN 1015-21:2002 BS EN 1015-21:2002. Methods of test for mortar for masonry. Determination of the compatibility of one-coat rendering mortars with substrates
ISO/IEC21408 : 2003 EDTN 2 ISO/IEC21408 : 2003 EDTN 2. ISO/IEC21408 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Inter- exchange signalling protocol -- Simple dialog supplementary service
BS EN 1870-5:2002 BS EN 1870-5:2002. Safety of woodworking machines. Circular sawing machines. Circular sawbenches/up-cutting cross-cut sawing machines
BS EN 13283:2002 BS EN 13283:2002. Zinc and zinc alloys. Secondary zinc
BS EN 61108-1:2003 BS EN 61108-1:2003. Global navigation satellite systems (GNSS). Global positioning system (GPS). Receiver equipment. Performance standards, methods of testing and required test results
BS EN 12002:2002 BS EN 12002:2002. Adhesives for tiles. Determination of transverse deformation for cementitious adhesives and grouts
BS EN 10223-7:2002 BS EN 10223-7:2002. Steel wire and wire products for fences. Steel wire welded panels. For fencing
DD ENV 13803-1:2002 DD ENV 13803-1:2002. Railway applications. Track alignment design parameters. Track gauges 1435 mm and wider. Plain line
BS EN 12484-5:2002 BS EN 12484-5:2002. Irrigation techniques. Automatic turf irrigation systems. Testing methods of systems
DD CLC/TS 50131-7:2003 DD CLC/TS 50131-7:2003. Alarm systems. Intrusion systems. Application guidelines
PD 6777:2003 PD 6777:2003. Guide to practical implementation of JPEG 2000
BS ISO 3045:2004 BS ISO 3045:2004. Oil of bay [Pimenta racemosa (Mill.) J.W. Moore]
BS EN 50356:2002 BS EN 50356:2002. Method for spark testing of cables
BS ISO 1652:2004 BS ISO 1652:2004. Rubber latex. Determination of apparent viscosity by the Brookfield test method
BS 7911:2003 BS 7911:2003. Specification for organizations conducting market research
ISO/ASTM51276 : 2002 EDTN 2 ISO/ASTM51276 : 2002 EDTN 2. ISO/ASTM51276 : 2002 Practice for use of a polymethylmethacrylate dosimetry system
BS EN ISO 787-13:2002 BS EN ISO 787-13:2002. General methods of test for pigments and extenders. Determination of water-soluble sulfates, chlorides and nitrates
BS EN ISO 787-14:2002 BS EN ISO 787-14:2002. General methods of test for pigments and extenders. Determination of resistivity of aqueous extract
BS EN 60335-2-101:2002 BS EN 60335-2-101:2002. Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for vaporizers. Particular requirements for vaporizers
BS EN ISO 9934-2:2002 BS EN ISO 9934-2:2002. Non-destructive testing. Magnetic particle testing. Detection media
ISO21049 : 2004 EDTN.1 ISO21049 : 2004 EDTN.1. ISO21049 : 2004 Pumps - Shaft sealing systems for centrifugal and rotary pumps
BS ISO 9631:2004 BS ISO 9631:2004. Rubber seals. Joint rings for pipelines for hot water supply, drainage and sewerage pipelines up to 110°C. Specifications for the material
PD CR 14311:2002 PD CR 14311:2002. Packaging. Marking and material identification system
BS ISO 5692-1:2004 BS ISO 5692-1:2004. Agricultural vehicles. Mechanical connections on towed vehicles. Dimensions for hitch-rings
BS ISO 10330:2002 BS ISO 10330:2002. Photography. Synchronizers, ignition circuits and connectors for cameras and photoflash units. Electrical characteristics and test methods
DD IEC TS 60695-7-51:2002 DD IEC TS 60695-7-51:2002. Fire hazard testing. Toxicity of fire effluent. Estimation of toxic potency. Calculation and interpretation of test results
BS EN 175101-809:2004 BS EN 175101-809:2004. Harmonized system of quality assessment for electronic components. Detail specification. Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality
ISO17706 : 2003 EDTN 1 ISO17706 : 2003 EDTN 1. ISO17706 : 2003 Footwear - Methods of test for uppers - Tensile strength and elongation
PD IEC TR 61282-5:2002 PD IEC TR 61282-5:2002. Fibre optic communication system design guides. Accommodation and compensation of dispersion
DD IEC/PAS 61499-4:2002 DD IEC/PAS 61499-4:2002. Function blocks for industrial-process measurement and control systems. Rules for compliance profiles
ISO17705 : 2003 EDTN 1 ISO17705 : 2003 EDTN 1. ISO17705 :2003 Footwear - Methods of test for uppers, lining and insocks - Thermal insulation
ISO17703 : 2003 EDTN 1 ISO17703 : 2003 EDTN 1. ISO17703 : 2003 Footwear - Methods of test for uppers - High temperature behaviour
ISO17702 : 2003 EDTN 1 ISO17702 : 2003 EDTN 1. ISO17702 : 2003 Footwear - Methods of test for uppers - Water resistance
ISO17701 : 2003 EDTN 1 ISO17701 : 2003 EDTN 1. ISO17701 : 2003 Footwear - Methods of test for uppers, lining and insocks - Colour migration
ISO17698 : 2003 EDTN 1 ISO17698 : 2003 EDTN 1. ISO17698 : 2003 Footwear - Methods of test for uppers - Delamination resistance
BS ISO/IEC 14143-2:2002 BS ISO/IEC 14143-2:2002. Information technology. Software measurement. Functional size measurement. Conformity evaluation of software size measurement methods to ISO/IEC 14143-1:1998
BS ISO 7507-1:2003 BS ISO 7507-1:2003. Petroleum and liquid petroleum products. Calibration of vertical cylindrical tanks. Strapping method
BS EN 1402-8:2003 BS EN 1402-8:2003. Unshaped refractory products. Determination of complementary properties
BS EN 1402-7:2003 BS EN 1402-7:2003. Unshaped refractory products. Tests on pre-formed shapes
BS EN 1402-4:2003 BS EN 1402-4:2003. Unshaped refractory products. Determination of consistency of castables
BS EN 60335-2-91:2003 BS EN 60335-2-91:2003. Specification for safety of household and similar electrical appliances. Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers
BS EN 14411:2003 BS EN 14411:2003. Ceramic tiles. Definitions, classification, characteristics and marking
BS ISO 7800:2003 BS ISO 7800:2003. Metallic materials. Wire. Simple torsion test
BS EN ISO 9513:2002 BS EN ISO 9513:2002. Metallic materials. Calibration of extensometers used in uniaxial testing
BS EN ISO 20844:2004 BS EN ISO 20844:2004. Petroleum and related products. Determination of the shear stability of polymer-containing oils using a diesel injector nozzle
BS EN 13528-1:2002 BS EN 13528-1:2002. Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods. General requirements
BS EN 13528-2:2002 BS EN 13528-2:2002. Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods. Specific requirements and test methods
BS ISO 10771-1:2002 BS ISO 10771-1:2002. Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes. Test method
BS EN ISO 1:2002 BS EN ISO 1:2002. Geometrical Product Specifications (GPS). Standard reference temperature for geometrical product specification and verification
BS EN 3724:2003 BS EN 3724:2003. Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001 MoS2 coated. Classification: 1 100 MPa (at ambient temperature)
BS EN 3752:2003 BS EN 3752:2003. Aerospace series. Nuts, self-locking, MJ threads, in heat resisting steel FE-PA92HT (A286), MoS2 coated. Classification: 1100 MPa (at ambient temperature) / 425°C. Technical specification
BS EN 3818:2003 BS EN 3818:2003. Bolts with MJ threads, in titanium alloy TI-P64001. Classification:1100 MPa (at ambient temperature). Technical specification


Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm