Any question, send the mail to findstandards@tom.com directly
http://www.findstandards.info
http://www.findstandards.info/Standards/DIN%20Standards.htm
http://www.findstandards.info/Standards/BSI%20Standards.htm
http://www.findstandards.info/Standards/ASTM%20Standards.htm
http://www.findstandards.info/Standards/ISO%20Standards.htm
http://www.findstandards.info/Standards/SAE%20Standards.htm
http://www.findstandards.info/Standards/JIS%20Standards.htm
http://www.findstandards.info/Standards/NFPA%20Standards.htm
http://www.findstandards.info/Standards/IEEE%20Standards.htm
http://www.findstandards.info/Standards/API%20Standards.htm
187 publications found for ICS code 19
IEC 60052
Edition 3.0 (2002-10)
TC/SC 42
Voltage measurement by means of standard air gaps
IEC 60060-1
Edition 2.0 (1989-11)
TC/SC 42
High-voltage test techniques. Part 1: General definitions and test requirements
IEC 60060-2
Edition 2.0 (1994-11)
TC/SC 42
High voltage test techniques - Part 2: Measuring systems
No preview IEC 60060-2-am1
Edition 2.0 (1996-03)
TC/SC 42
Amendment 1 - High voltage test techniques - Part 2: Measuring systems
IEC 60060-3
Edition 1.0 (2006-02)
TC/SC 42
High-voltage test techniques - Part 3: Definitions and requirements for on-site testing
IEC 60068-1
Edition 6.0 (1988-06)
TC/SC 104
Environmental testing. Part 1: General and guidance
No preview IEC 60068-1-am1
Edition 6.0 (1992-04)
TC/SC 104
Amendment 1 - Environmental testing. Part 1: General and guidance
IEC 60068-2-1
Edition 6.0 (2007-03)
TC/SC 104
Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 60068-2-2
Edition 5.0 (2007-07)
TC/SC 104
Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-5
Edition 1.0 (1975-01)
TC/SC 104
Environmental testing - Part 2: Tests. Test Sa: Simulated solar radiation at ground level
IEC 60068-2-6
Edition 7.0 (2007-12)
TC/SC 104
Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
IEC 60068-2-7
Edition 2.0 (1983-01)
TC/SC 104
Environmental testing. Part 2: Tests. Test Ga: Acceleration, steady state 55.-
61.-
No preview IEC 60068-2-7-am1
Edition 2.0 (1986-01)
TC/SC 104
Amendment 1 - Environmental testing. Part 2: Tests. Test Ga: Acceleration, steady state
IEC 60068-2-9
Edition 1.0 (1975-01)
TC/SC 104
Environmental testing - Part 2: Tests. Guidance for solar radiation testing
No preview IEC 60068-2-9-am1
Edition 1.0 (1984-01)
TC/SC 104
Amendment 1 - Environmental testing - Part 2: Tests. Guidance for solar radiation testing
IEC 60068-2-10
Edition 6.0 (2005-06)
TC/SC 104
Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
IEC 60068-2-11
Edition 3.0 (1981-01)
TC/SC 104
Environmental testing - Part 2: Tests. Test Ka: Salt mist
IEC 60068-2-13
Edition 4.0 (1983-01)
TC/SC 104
Environmental testing - Part 2: Tests. Test M: Low air pressure
IEC 60068-2-14
Edition 6.0 (2009-01)
TC/SC 104
Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60068-2-17
Edition 4.0 (1994-07)
TC/SC 104
Basic environmental testing procedures - Part 2: Tests - Test Q: Sealing 200.-
220
IEC 60068-2-18
Edition 2.0 (2000-10)
TC/SC 104
Environmental testing - Part 2-18: Tests - Test R and guidance: Water
IEC 60068-2-20
Edition 5.0 (2008-07)
TC/SC 91
Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
IEC 60068-2-21
Edition 6.0 (2006-06)
TC/SC 91
Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
IEC 60068-2-27
Edition 4.0 (2008-02)
TC/SC 104
Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 60068-2-30
Edition 3.0 (2005-08)
TC/SC 104
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
IEC 60068-2-31
Edition 2.0 (2008-05)
TC/SC 104
Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
IEC 60068-2-38
Edition 2.0 (2009-01)
TC/SC 104
Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
IEC 60068-2-39
Edition 1.0 (1976-01)
TC/SC 104
Environmental testing - Part 2: Tests. Test Z/AMD: Combined sequential cold, low air pressure, and damp heat test
IEC 60068-2-40
Edition 1.0 (1976-01)
TC/SC 104
Environmental testing - Part 2: Tests. Test Z/AM: Combined cold/low air pressure tests
No preview IEC 60068-2-40-am1
Edition 1.0 (1983-01)
TC/SC 104
Amendment 1 - Environmental testing - Part 2: Tests. Test Z/AM: Combined cold/low air pressure tests
IEC 60068-2-41
Edition 1.0 (1976-01)
TC/SC 104
Environmental testing - Part 2: Tests. Test Z/BM: Combined dry heat/low air pressure tests
No preview IEC 60068-2-41-am1
Edition 1.0 (1983-01)
TC/SC 104
Amendment 1 - Environmental testing - Part 2: Tests. Test Z/BM: Combined dry heat/low air pressure tests
IEC 60068-2-44
Edition 2.0 (1995-01)
TC/SC 91
Environmental testing - Part 2: Tests - Guidance on test T: Soldering
IEC 60068-2-45
Edition 1.0 (1980-01)
TC/SC 104
Environmental testing. Part 2: Tests. Test XA and guidance: Immersion in cleaning solvents
No preview IEC 60068-2-45-am1
Edition 1.0 (1993-02)
TC/SC 104
Amendment 1 - Environmental testing. Part 2: Tests. Test XA and guidance: Immersion in cleaning solvents
IEC 60068-2-46
Edition 1.0 (1982-01)
TC/SC 48B
Environmental testing - Part 2: Tests. Guidance to Test Kd: Hydrogen sulphide test for contacts and connections
IEC 60068-2-47
Edition 3.0 (2005-04)
TC/SC 104
Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests
IEC 60068-2-49
Edition 1.0 (1983-01)
TC/SC 48B
Environmental testing - Part 2: Tests. Guidance to Test Kc: Sulphur dioxide test for contacts and connections
IEC 60068-2-50
Edition 1.0 (1983-01)
TC/SC 104
Environmental testing. Part 2: Tests. Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
IEC 60068-2-51
Edition 1.0 (1983-01)
TC/SC 104
Environmental testing. Part 2: Tests. Tests Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
IEC 60068-2-52
Edition 2.0 (1996-02)
TC/SC 104
Environmental testing - Part 2: Tests - Test Kb: Salt mist, cyclic (sodium, chloride solution)
IEC 60068-2-53
Edition 1.0 (1984-12)
TC/SC 104
Environmental testing. Part 2: Tests. Guidance to Tests Z/AFc and Z/BFc: Combined temperature (cold and dry heat) and vibration (sinusoidal) tests
IEC 60068-2-54
Edition 2.0 (2006-04)
TC/SC 91
Environmental testing - Part 2-54: Tests - Test Ta: Solderability testing of electronic components by the wetting balance method
IEC 60068-2-55
Edition 1.0 (1987-11)
TC/SC 104
Environmental testing. Part 2: Tests. Test Ee and guidance: Bounce
IEC 60068-2-57
Edition 2.0 (1999-11)
TC/SC 104
Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history method
IEC 60068-2-58
Edition 3.0 (2004-07)
TC/SC 91
Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
IEC 60068-2-59
Edition 1.0 (1990-11)
TC/SC 104
Environmental testing. Part 2: Tests. Test Fe: Vibration - Sine-beat method
IEC 60068-2-60
Edition 2.0 (1995-12)
TC/SC 104
Environmental testing - Part 2: Tests - Test Ke: Flowing mixed gas corrosion test
IEC 60068-2-61
Edition 1.0 (1991-07)
TC/SC 104
Environmental testing - Part 2: Test methods - Test Z/ABDM: Climatic sequence
IEC 60068-2-64
Edition 2.0 (2008-04)
TC/SC 104
Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
IEC 60068-2-80
Edition 1.0 (2005-05)
TC/SC 104
Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode
IEC 60068-2-81
Edition 1.0 (2003-07)
TC/SC 104
Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis
IEC 60068-2-82
Edition 1.0 (2007-05)
TC/SC 91
Environmental testing - Part 2-82: Tests - Test Tx: Whisker test methods for electronic and electric components
IEC 60068-3-1
Edition 1.0 (1974-01)
TC/SC 104
Environmental testing - Part 3: Background information - Section One: Cold and dry heat tests
IEC 60068-3-1A
Edition 1.0 (1978-01)
TC/SC 104
Environmental testing - Part 3: Background information - First supplement
IEC 60068-3-2
Edition 1.0 (1976-01)
TC/SC 104
Environmental testing - Part 3: Background information - Section Two: Combined temperature/low air pressure tests 30.-
33.-
IEC 60068-3-3
Edition 1.0 (1991-02)
TC/SC 104
Environmental testing - Part 3: Guidance. Seismic test methods for equipment
IEC 60068-3-4
Edition 1.0 (2001-08)
TC/SC 104
Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
IEC 60068-3-5
Edition 1.0 (2001-08)
TC/SC 104
Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers
IEC 60068-3-6
Edition 1.0 (2001-08)
TC/SC 104
Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers
IEC 60068-3-7
Edition 1.0 (2001-08)
TC/SC 104
Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load)
IEC 60068-3-8
Edition 1.0 (2003-08)
TC/SC 104
Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests
IEC 60068-3-11
Edition 1.0 (2007-05)
TC/SC 104
Environmental testing - Part 3-11: Supporting documentation and guidance - Calculation of uncertainty of conditions in climatic test chambers
IEC/TR 60068-3-12
Edition 1.0 (2007-03)
TC/SC 91
Environmental testing - Part 3-12: Supporting documentation and guidance - Method to evaluate a possible lead-free solder reflow temperature profile 75.-
83.-
IEC 60068-4
Edition 1.0 (1987-09)
TC/SC 104
Environmental testing. Part 4: Information for specification writers - Test summaries
No preview IEC 60068-4-am1
Edition 1.0 (1992-02)
TC/SC 104
Amendment 1 - Environmental testing. Part 4: Information for specification writers - Test summaries
No preview IEC 60068-4-am2
Edition 1.0 (1994-03)
TC/SC 104
Amendment 2 - Environmental testing. Part 4: Information for specification writers - Test summaries
IEC 60068-5-2
Edition 1.0 (1990-12)
TC/SC 104
Environmental testing. Part 5: Guide to drafting of test methods - Terms and definitions
IEC 60112
Edition 4.0 (2003-01)
TC/SC 112
Method for the determination of the proof and the comparative tracking indices of solid insulating materials
IEC 60216-3
Edition 2.0 (2006-04)
TC/SC 112
Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
IEC 60216-4-3
Edition 1.0 (2000-04)
TC/SC 112
Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens
IEC 60216-5
Edition 3.0 (2008-03)
TC/SC 112
Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
IEC 60270
Edition 3.0 (2000-12)
TC/SC 42
High-voltage test techniques - Partial discharge measurements
IEC 60534-4
Edition 3.0 (2006-06)
TC/SC 65B
Industrial-process control valves - Part 4: Inspection and routine testing
IEC 60601-2-17
Edition 2.0 (2004-01)
TC/SC 62C
Medical electrical equipment - Part 2-17: Particular requirements for the safety of automatically-controlled brachytherapy afterloading equipment
IEC 60605-2
Edition 1.0 (1994-10)
TC/SC 56
Equipment reliability testing - Part 2: Design of test cycles
IEC 60605-4
Edition 2.0 (2001-08)
TC/SC 56
Equipment reliability testing - Part 4: Statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals
IEC 60605-6
Edition 3.0 (2007-05)
TC/SC 56
Equipment reliability testing - Part 6: Tests for the validity and estimation of the constant failure rate and constant failure intensity
IEC/TS 60695-5-2
Edition 2.0 (2002-09)
TC/SC 89
Fire hazard testing - Part 5-2: Corrosion damage effects of fire effluent - Summary and relevance of test methods
IEC/TS 60695-5-3
Edition 1.0 (2003-04)
TC/SC 89
Fire hazard testing - Part 5-3: Corrosion damage effects of fire effluent - Leakage-current and metal-loss test method
IEC 60721-1
Consolidated Edition 2.2 (incl. am1+am2) (2002-10)
TC/SC 104
Classification of environmental conditions - Part 1: Environmental parameters and their severities
No preview IEC 60721-1-am1
Edition 2.0 (1992-12)
TC/SC 104
Amendment 1 - Classification of environmental conditions - Part 1: Environmental parameters and their severities
No preview IEC 60721-1-am2
Edition 2.0 (1995-04)
TC/SC 104
Amendment 2 - Classification of environmental conditions - Part 1: Environmental parameters and their severities
IEC 60721-2-1
Consolidated Edition 1.1 (incl. am1) (2002-10)
TC/SC 104
Classification of environmental conditions - Part 2-1: Environmental conditions appearing in nature - Temperature and humidity
No preview IEC 60721-2-1-am1
Edition 1.0 (1987-01)
TC/SC 104
Amendment 1 - Classification of environmental conditions. Part 2: Environmental conditions appearing in nature. Temperature and humidity
IEC 60721-2-2
Edition 1.0 (1988-01)
TC/SC 104
Classification of environmental conditions. Part 2: Environmental conditions appearing in nature. Precipitation and wind
IEC 60721-2-3
Edition 1.0 (1987-12)
TC/SC 104
Classification of environmental conditions - Part 2: Environmental conditions appearing in nature. Air pressure
IEC 60721-2-4
Consolidated Edition 1.1 (incl. am1) (2002-10)
TC/SC 104
Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and temperature
No preview IEC 60721-2-4-am1
Edition 1.0 (1988-01)
TC/SC 104
Amendment 1 - Classification of environmental conditions. Part 2: Environmental conditions appearing in nature. Solar radiation and temperature
IEC 60721-2-5
Edition 1.0 (1991-07)
TC/SC 104
Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Section 5: Dust, sand, salt mist
IEC 60721-2-6
Edition 1.0 (1990-12)
TC/SC 104
Classification of environmental conditions. Part 2: Environmental conditions appearing in nature. Earthquake vibration and shock
IEC 60721-2-7
Edition 1.0 (1987-12)
TC/SC 104
Classification of environmental conditions. Part 2: Environmental conditions appearing in nature. Fauna and flora
IEC 60721-2-8
Edition 1.0 (1994-06)
TC/SC 104
Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Section 8: Fire exposure 105.-
IEC 60721-3-0
Consolidated Edition 1.1 (incl. am1) (2002-10)
TC/SC 104
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Introduction
No preview IEC 60721-3-0-am1
Edition 1.0 (1987-01)
TC/SC 104
Amendment 1 - Classification of environmental conditions. Part 3: Classification of groups of environmental parameters and their severities. Introduction
IEC 60721-3-1
Edition 2.0 (1997-02)
TC/SC 104
Classification of environmental conditions - Part 3 Classification of groups of environmental parameters and their severities - Section 1: Storage
IEC 60721-3-2
Edition 2.0 (1997-03)
TC/SC 104
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation
IEC 60721-3-3
Consolidated Edition 2.2 (incl. am1+am2) (2002-10)
TC/SC 104
Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations
No preview IEC 60721-3-3-am1
Edition 2.0 (1995-06)
TC/SC 104
Amendment 1 - Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 3: Stationary use at weatherprotected locations
No preview IEC 60721-3-3-am2
Edition 2.0 (1996-11)
TC/SC 104
Amendment 2 - Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 3: Stationary use at weatherprotected locations
IEC 60721-3-4
Edition 2.0 (1995-01)
TC/SC 104
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 4: Stationary use at non-weatherprotected locations
No preview IEC 60721-3-4-am1
Edition 2.0 (1996-11)
TC/SC 104
Amendment 1 - Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 4: Stationary use at non-weatherprotected locations
IEC 60721-3-5
Edition 2.0 (1997-03)
TC/SC 104
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations
IEC 60721-3-6
Edition 1.0 (1987-04)
TC/SC 104
Classification of environmental conditions. Part 3: Classification of groups of environmental parameters and their severities. Ship environment
No preview IEC 60721-3-6-am1
Edition 1.0 (1991-07)
TC/SC 104
Amendment 1 - Classification of environmental conditions. Part 3: Classification of groups of environmental parameters and their severities. Ship environment
No preview IEC 60721-3-6-am2
Edition 1.0 (1996-11)
TC/SC 104
Amendment 2 - Classification of environmental conditions. Part 3: Classification of groups of environmental parameters and their severities. Ship environment
IEC 60721-3-7
Consolidated Edition 2.1 (incl. am1) (2002-10)
TC/SC 104
Classification of environmental conditions - Part 3-7: Classification of groups of environmental parameters and their severities - Portable and non-stationary use
No preview IEC 60721-3-7-am1
Edition 2.0 (1996-11)
TC/SC 104
Amendment 1 - Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 7: Portable and non-stationary use
IEC 60721-3-9
Edition 1.0 (1993-07)
TC/SC 104
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 9: Microclimates inside products
No preview IEC 60721-3-9-am1
Edition 1.0 (1994-12)
TC/SC 104
Amendment 1 - Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 9: Microclimates inside products
IEC/TR 60721-4-0
Edition 1.0 (2002-08)
TC/SC 104
Classification of environmental conditions - Part 4-0: Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Introduction
IEC/TR 60721-4-1
Consolidated Edition 1.1 (incl. am1) (2003-08)
TC/SC 104
Classification of environmental conditions - Part 4-1: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Storage
No preview IEC/TR 60721-4-1-am1
Edition 1.0 (2003-05)
TC/SC 104
Amendment 1 - Classification of environmental conditions - Part 4-1: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Storage
IEC/TR 60721-4-2
Consolidated Edition 1.1 (incl. am1) (2003-08)
TC/SC 104
Classification of environmental conditions - Part 4-2: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Transportation
No preview IEC/TR 60721-4-2-am1
Edition 1.0 (2003-05)
TC/SC 104
Amendment 1 - Classification of environmental conditions - Part 4-2: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Transportation
IEC/TR 60721-4-3
Consolidated Edition 1.1 (incl. am1) (2003-08)
TC/SC 104
Classification of environmental conditions - Part 4-3: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at weatherprotected locations
No preview IEC/TR 60721-4-3-am1
Edition 1.0 (2003-05)
TC/SC 104
Amendment 1 - Classification of environmental conditions - Part 4-3: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at weatherprotected locations
IEC/TR 60721-4-4
Consolidated Edition 1.1 (incl. am1) (2003-08)
TC/SC 104
Classification of environmental conditions - Part 4-4: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at non-weatherprotected locations
No preview IEC/TR 60721-4-4-am1
Edition 1.0 (2003-05)
TC/SC 104
Amendment 1 - Classification of environmental conditions - Part 4-4: Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at non-weatherprotected locations
IEC/TR 60721-4-5
Consolidated Edition 1.1 (incl. am1) (2003-08)
TC/SC 104
Classification of environmental conditions - Part 4-5: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Ground vehicle installations
preview IEC/TR 60721-4-5-am1
Edition 1.0 (2003-05)
TC/SC 104
Amendment 1 - Classification of environmental conditions - Part 4-5: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Ground vehicle installations
IEC/TR 60721-4-6
Consolidated Edition 1.1 (incl. am1) (2003-08)
TC/SC 104
Classification of environmental conditions - Part 4-6: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Ship environment
No preview IEC/TR 60721-4-6-am1
Edition 1.0 (2003-05)
TC/SC 104
Amendment 1 - Classification of environmental conditions - Part 4-6: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Ship environment
IEC/TR 60721-4-7
Consolidated Edition 1.1 (incl. am1) (2003-08)
TC/SC 104
Classification of environmental conditions - Part 4-7: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Portable and non-stationary use
No preview IEC/TR 60721-4-7-am1
Edition 1.0 (2003-05)
TC/SC 104
Amendment 1 - Classification of environment conditions - Part 4-7: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Portable and non-stationary use 75.-
83.-
IEC 60746-1
Edition 2.0 (2003-01)
TC/SC 65B
Expression of performance of electrochemical analyzers - Part 1: General
IEC 60746-2
Edition 2.0 (2003-01)
TC/SC 65B
Expression of performance of electrochemical analyzers - Part 2: pH value
IEC 60746-4
Edition 1.0 (1992-12)
TC/SC 65B
Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane covered amperometric sensors
IEC 60746-5
Edition 1.0 (1992-12)
TC/SC 65B
Expression of performance of electrochemical analyzers - Part 5: Oxidation-reduction potential or redox potential
IEC 61010-1
Edition 2.0 (2001-02)
TC/SC 66
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
IEC 61010-2-010
Edition 2.0 (2003-06)
TC/SC 66
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-020
Edition 2.0 (2006-05)
TC/SC 66
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
IEC 61010-2-032
Edition 2.0 (2002-09)
TC/SC 66
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement
IEC 61010-2-040
Edition 1.0 (2005-04)
TC/SC 66
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
IEC 61010-2-051
Edition 2.0 (2003-06)
TC/SC 66
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
IEC 61010-2-061
Edition 2.0 (2003-06)
TC/SC 66
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
IEC 61010-2-081
Edition 1.0 (2001-06)
TC/SC 66
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
No preview IEC 61010-2-081-am1
Edition 1.0 (2003-06)
TC/SC 66
Amendment 1 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
IEC 61010-2-101
Edition 1.0 (2002-01)
TC/SC 66
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
IEC/TR 61010-3
Edition 2.0 (2003-04)
TC/SC 66
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3: Protocol for the preparation of conformity verification reports for the IEC 61010 2nd edition series
IEC/TR 61010-3-1
Edition 2.0 (2003-04)
TC/SC 66
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-1: Conformity verification report for IEC 61010-1:2001 - General requirements
IEC/TR 61010-3-010
Edition 1.0 (1999-02)
TC/SC 66
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-010: Conformity verification report for IEC 61010-2-010, Particular requirements for laboratory equipment for the heating of materials
IEC/TR 61010-3-020
Edition 1.0 (1999-04)
TC/SC 66
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-020: Conformity verification report for IEC 61010-2-020:1992 Particular requirements for laboratory centrifuges
IEC/TR 61010-3-031
Edition 1.0 (2003-04)
TC/SC 66
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-031: Conformity verification report for IEC 61010-031:2002 - Safety requirements for hand-held probe assemblies for electrical test and measurement
IEC/TR 61010-3-032
Edition 1.0 (2000-01)
TC/SC 66
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-032: Conformity verification report for IEC 61010-2-032:1994, Particular requirements for hand-held current clamps for electrical measurement and test
IEC/TR 61010-3-041
Edition 1.0 (1999-10)
TC/SC 66
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-041: Conformity verification report for IEC 61010-2-041:1995, Particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes
IEC/TR 61010-3-042
Edition 1.0 (1999-10)
TC/SC 66
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-042: Conformity verification report for IEC 61010-2-042:1997, Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials, and for laboratory processes
IEC/TR 61010-3-043
Edition 1.0 (2001-08)
TC/SC 66
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 3-043: Conformity verification report for IEC 61010-2-043:1997 - Particular requirements for dry heat sterilizers using either hot air or hot inert gas for treatment of medical materials and for laboratory processes
IEC/TR 61010-3-045
Edition 1.0 (2003-04)
TC/SC 66
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-045: Conformity verification report for IEC 61010-2-045:2000 - Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields
IEC/TR 61010-3-051
Edition 1.0 (1999-02)
TC/SC 66
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-051: Conformity verification report for IEC 61010-2-051, Particular requirements for laboratory equipment for mixing and stirring
IEC/TR 61010-3-061
Edition 1.0 (1999-02)
TC/SC 66
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-061: Conformity verification report for IEC 61010-2-061, Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
IEC/TR 61010-3-081
Edition 1.0 (2003-04)
TC/SC 66
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-081: Conformity verification report for IEC 61010-2-081:2001 - Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
IEC/TR 61010-3-101
Edition 1.0 (2003-04)
TC/SC 66
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-101: Conformity verification report for IEC 61010-2-101:2002 - Particular requirements for in vitro diagnostic (IVD) medical equipment
IEC 61010-031
Consolidated Edition 1.1 (incl. am1) (2008-06)
TC/SC 66
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
No preview IEC 61010-031-am1
Edition 1.0 (2008-02)
TC/SC 66
Amendment 1 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
IEC 61028
Edition 1.0 (1990-06)
TC/SC 85
Electrical measuring instruments - X-Y recorders
No preview IEC 61028-am1
Edition 1.0 (1995-05)
TC/SC 85
Amendment 1 - Electrical measuring instruments - X-Y recorders
No preview IEC 61028-am2
Edition 1.0 (1997-10)
TC/SC 85
Amendment 2 - Electrical measuring instruments - X-Y recorders
IEC 61083-1
Edition 2.0 (2001-06)
TC/SC 42
Instruments and software used for measurement in high-voltage impulse tests - Part 1: Requirements for instruments
IEC 61083-2
Edition 1.0 (1996-07)
TC/SC 42
Digital recorders for measurements in high-voltage impulse tests - Part 2: Evaluation of software used for the determination of the parameters of impulse waveforms
IEC 61115
Edition 1.0 (1992-03)
TC/SC 65B
Expression of performance of sample handling systems for process analyzers
IEC 61124
Edition 2.0 (2006-03)
TC/SC 56
Reliability testing - Compliance tests for constant failure rate and constant failure intensity
IEC 61180-1
Edition 1.0 (1992-10)
TC/SC 42
High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements
IEC 61180-2
Edition 1.0 (1994-06)
TC/SC 42
High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
IEC 61207-1
Edition 1.0 (1994-02)
TC/SC 65B
Expression of performance of gas analyzers - Part 1: General
IEC 61207-3
Edition 2.0 (2002-04)
TC/SC 65B
Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
IEC 61207-6
Edition 1.0 (1994-03)
TC/SC 65B
Expression of performance of gas analyzers - Part 6: Photometric analyzers
IEC 61335
Edition 1.0 (1997-04)
TC/SC 45
Nuclear instrumentation - Bore-hole apparatus for X-ray fluorescence analysis
IEC 61442
Edition 2.0 (2005-03)
TC/SC 20
Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
IEC/TS 61774
Edition 1.0 (1997-08)
TC/SC 11
Overhead lines - Meteorological data for assessing climatic loads
IEC 62431
Edition 1.0 (2008-07)
TC/SC 46F
Reflectivity of electromagnetic wave absorbers in millimetre wave frequency - Measurement methods
IEC/TR 62432
Edition 1.0 (2006-03)
TC/SC 65B
The rH index in aqueous and aqueous-organic media
IEC/TR 62434
Edition 1.0 (2006-03)
TC/SC 65B
pH measurements in difficult media - Definitions, standards and procedures
IEC 62525
Edition 1.0 (2007-11)
TC/SC 93
Standard Test Interface Language (STIL) for Digital Test Vector Data
IEC GUIDE 106
Edition 2.0 (1996-07)
TC/SC ACET
Guide for specifying environmental conditions for equipment performance rating
IEC GUIDE 115
Edition 1.0 (2007-09)
TC/SC IECEE-CTL
Application of uncertainty of measurement to conformity assessment activities in the electrotechnical sector
ISO/IEC GUIDE 46
Edition 1.0 (1985-11)
TC/SC ISO/COPOLCO
Comparative testing of consumer products and related services -- General principles
Any question, send the mail to findstandards@tom.com directly
http://www.findstandards.info
http://www.findstandards.info/Standards/DIN%20Standards.htm
http://www.findstandards.info/Standards/BSI%20Standards.htm
http://www.findstandards.info/Standards/ASTM%20Standards.htm
http://www.findstandards.info/Standards/ISO%20Standards.htm
http://www.findstandards.info/Standards/SAE%20Standards.htm
http://www.findstandards.info/Standards/JIS%20Standards.htm
http://www.findstandards.info/Standards/NFPA%20Standards.htm
http://www.findstandards.info/Standards/IEEE%20Standards.htm
http://www.findstandards.info/Standards/API%20Standards.htm
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment