2009/09/07

Cheapest & Latest ISO Standard (PDF) (9)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


23 Fluid systems and components for general use
ICS Field
23.020 Fluid storage devices
Small containers for transportation of fluids and bulk materials, see 55.140
Storage devices for petroleum products and natural gas, see 75.200
ICS Field
23.020.01 Fluid storage devices in general
23.020.10 Stationary containers and tanks
23.020.20 Vessels and containers mounted on vehicles
Small containers for fluids, see 55.140
Tank wagons, see 45.060.20
Tanker trucks, see 43.080.10
Tankers, see 47.020.85
23.020.30 Gas pressure vessels, gas cylinders
Steam pressure vessels, see 27.060.30
Steels for pressure purposes, see 77.140.30
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 3500:2005
Gas cylinders -- Seamless steel CO2 cylinders for fixed fire-fighting installations on ships 90.60 TC 58/SC 3
ISO 3500:2005/DAmd 1
40.60 TC 58/SC 3
ISO/NP 3807-1
Cylinders for acetylene -- Basic requirements -- Part 1: Cylinders without fusible plugs 10.99 TC 58
ISO 3807-1:2000
Cylinders for acetylene -- Basic requirements -- Part 1: Cylinders without fusible plugs 90.92 TC 58
ISO 3807-2:2000
Cylinders for acetylene -- Basic requirements -- Part 2: Cylinders with fusible plugs 90.92 TC 58
ISO/NP 3807-2
Cylinders for acetylene -- Basic requirements -- Part 2: Cylinders with fusible plugs 10.99 TC 58
ISO 4706:2008
Gas cylinders -- Refillable welded steel cylinders -- Test pressure 60 bar and below 60.60 TC 58/SC 3
ISO 5145:2004
Cylinder valve outlets for gases and gas mixtures -- Selection and dimensioning 90.60 TC 58/SC 2
ISO 5145:2004/Amd 1:2006
Cylinder valve outlets for gases for medical use 60.60 TC 58/SC 2
ISO 5145:2004/Amd 2:2008
60.60 TC 58/SC 2
ISO 6406:2005
Gas cylinders -- Seamless steel gas cylinders -- Periodic inspection and testing 90.92 TC 58/SC 4
ISO 7225:2005
Gas cylinders -- Precautionary labels 90.60 TC 58/SC 4
ISO/TR 7470:1988
Valve outlets for gas cylinders -- List of provisions which are either standardized or in use 60.60 TC 58/SC 2
ISO/DIS 7866.2
Gas cylinders -- Refillable seamless aluminium alloy gas cylinders -- Design, construction and testing 40.60 TC 58/SC 3
ISO 7866:1999
Gas cylinders -- Refillable seamless aluminium alloy gas cylinders -- Design, construction and testing 90.92 TC 58/SC 3
ISO 9809-1:1999
Gas cylinders -- Refillable seamless steel gas cylinders -- Design, construction and testing -- Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa 90.92 TC 58/SC 3
ISO/FDIS 9809-1
Gas cylinders -- Refillable seamless steel gas cylinders -- Design, construction and testing -- Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa 50.00 TC 58/SC 3
ISO 9809-2:2000
Gas cylinders -- Refillable seamless steel gas cylinders -- Design, construction and testing -- Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa 90.92 TC 58/SC 3
ISO/FDIS 9809-2
Gas cylinders -- Refillable seamless steel gas cylinders -- Design, construction and testing -- Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa 50.00 TC 58/SC 3
ISO 9809-3:2000
Gas cylinders -- Refillable seamless steel gas cylinders -- Design, construction and testing -- Part 3: Normalized steel cylinders 90.92 TC 58/SC 3
ISO/FDIS 9809-3
Gas cylinders -- Refillable seamless steel gas cylinders -- Design, construction and testing -- Part 3: Normalized steel cylinders 50.00 TC 58/SC 3
ISO/AWI 9809-4
Gas cylinders -- Refillable seamless steel gas cylinders -- Design, construction and testing -- Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa 20.00 TC 58/SC 3
ISO 10156:1996
Gases and gas mixtures -- Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets 90.92 TC 58/SC 2
ISO/DIS 10156
Gases and gas mixtures -- Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets 40.60 TC 58/SC 2
ISO 10156-2:2005
Gas cylinders -- Gases and gas mixtures -- Part 2: Determination of oxidizing ability of toxic and corrosive gases and gas mixtures 90.92 TC 58/SC 2
ISO 10286:2007
Gas cylinders -- Terminology 60.60 TC 58
ISO 10297:2006
Transportable gas cylinders -- Cylinder valves -- Specification and type testing 90.92 TC 58/SC 2
ISO 10460:2005
Gas cylinders -- Welded carbon-steel gas cylinders -- Periodic inspection and testing 90.60 TC 58/SC 4
ISO 10461:2005
Gas cylinders -- Seamless aluminium-alloy gas cylinders -- Periodic inspection and testing 90.92 TC 58/SC 4
ISO 10461:2005/Amd 1:2006
60.60 TC 58/SC 4
ISO 10462:2005
Gas cylinders -- Transportable cylinders for dissolved acetylene -- Periodic inspection and maintenance 90.60 TC 58/SC 4
ISO 10464:2004
Gas cylinders -- Refillable welded steel cylinders for liquefied petroleum gas (LPG) -- Periodic inspection and testing 90.93 TC 58/SC 4
ISO 10691:2004
Gas cylinders -- Refillable welded steel cylinders for liquified petroleum gas (LPG) -- Procedures for checking before, during and after filling 90.93 TC 58/SC 4
ISO 10692-1:2001
Gas cylinders -- Gas cylinder valve connections for use in the micro-electronics industry -- Part 1: Outlet connections 90.60 TC 58/SC 2
ISO 10692-2:2001
Gas cylinders -- Gas cylinder valve connections for use in the micro-electronics industry -- Part 2: Specification and type testing for valve to cylinder connections 90.60 TC 58/SC 2
ISO 10920:1997
Gas cylinders -- 25E taper thread for connection of valves to gas cylinders -- Specification 90.60 TC 58/SC 2
ISO/DIS 10961
Gas cylinders -- Cylinder bundles -- Design, manufacture, identification and testing 40.60 TC 58/SC 4
ISO 11114-1:1997
Transportable gas cylinders -- Compatibility of cylinder and valve materials with gas contents -- Part 1: Metallic materials 90.92 TC 58
ISO/DIS 11114-1
Transportable gas cylinders -- Compatibility of cylinder and valve materials with gas contents -- Part 1: Metallic materials 40.20 TC 58
ISO 11114-2:2000
Transportable gas cylinders -- Compatibility of cylinder and valve materials with gas contents -- Part 2: Non-metallic materials 90.92 TC 58
ISO/AWI 11114-2
Transportable gas cylinders -- Compatibility of cylinder and valve materials with gas contents -- Part 2: Non-metallic materials 20.00 TC 58
ISO 11114-3:1997
Transportable gas cylinders -- Compatibility of cylinder and valve materials with gas contents -- Part 3: Autogenous ignition test in oxygen atmosphere 90.92 TC 58
ISO/DIS 11114-3
Transportable gas cylinders -- Compatibility of cylinder and valve materials with gas contents -- Part 3: Autogenous ignition test in oxygen atmosphere 40.60 TC 58
ISO 11114-4:2005
Transportable gas cylinders -- Compatibility of cylinder and valve materials with gas contents -- Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement 90.60 TC 58
ISO 11116-1:1999
Gas cylinders -- 17E taper thread for connection of valves to gas cylinders -- Part 1: Specifications 90.60 TC 58/SC 2
ISO 11116-2:1999
Gas cylinders -- 17E taper thread for connection of valves to gas cylinders -- Part 2: Inspection gauges 90.60 TC 58/SC 2
ISO 11117:2008
Gas cylinders -- Valve protection caps and valve guards -- Design, construction and tests 60.60 TC 58/SC 2
ISO 11117:2008/Cor 1:2009
60.60 TC 58/SC 2
ISO 11118:1999
Gas cylinders -- Non-refillable metallic gas cylinders -- Specification and test methods 90.92 TC 58/SC 3
ISO/CD 11118
Gas cylinders -- Non-refillable metallic gas cylinders -- Specification and test methods 30.60 TC 58/SC 3
ISO/CD 11119-1
Gas cylinders of composite construction -- Specification and test methods -- Part 1: Hoop wrapped composite gas cylinders 30.60 TC 58/SC 3
ISO 11119-1:2002
Gas cylinders of composite construction -- Specification and test methods -- Part 1: Hoop wrapped composite gas cylinders 90.92 TC 58/SC 3
ISO/CD 11119-2
Gas cylinders of composite construction -- Specification and test methods -- Part 2: Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners 30.60 TC 58/SC 3
ISO 11119-2:2002
Gas cylinders of composite construction -- Specification and test methods -- Part 2: Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners 90.92 TC 58/SC 3
ISO 11119-3:2002
Gas cylinders of composite construction -- Specification and test methods -- Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners 90.92 TC 58/SC 3
ISO/CD 11119-3
Gas cylinders of composite construction -- Specification and test methods -- Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners 30.60 TC 58/SC 3
ISO/DIS 11120
Gas cylinders -- Refillable seamless steel tubes of water capacity between 150 l and 3000 l -- Design construction and testing 40.20 TC 58/SC 3
ISO 11120:1999
Gas cylinders -- Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l -- Design construction and testing 90.92 TC 58/SC 3
ISO 11191:1997
Gas cylinders -- 25E taper thread for connection of valves to gas cylinders -- Inspection gauges 90.60 TC 58/SC 2
ISO/DIS 11363-1
Gas cylinders -- 17E and 25E taper threads for connection of valves to gas cylinders -- Part 1: Specifications 40.99 TC 58/SC 2
ISO/DIS 11363-2
Gas cylinders -- 17E and 25E taper threads for connection of valves to gas cylinders -- Part 2: Inspection gauges 40.99 TC 58/SC 2
ISO/CD TR 11364
Gas Cylinders -- Compilation of national and international valve stem/gas cylinder neck threads and their identification and marking system 30.60 TC 58
ISO/CD 11372
Gas cylinders -- Acetylene cylinders -- Filling conditions and filling inspection 30.60 TC 58/SC 4
ISO 11372:2005
Gas cylinders -- Cylinders for dissolved acetylene -- Inspection at time of filling 90.92 TC 58/SC 4
ISO/CD 11439
Gas cylinders -- High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles 30.60 TC 58/SC 3
ISO/CD 11513
Refillable welded steel cylinders used to contain materials for sub-atmospheric gas storage and delivery (excluding acetylene) 30.60 TC 58/SC 3
ISO/AWI 11515
Gas cylinders -- Refilable composite reinforced tubes of water capacity between 150 L and 3000 L -- Design, construction and testing 20.00 TC 58/SC 3
ISO 11621:1997
Gas cylinders -- Procedures for change of gas service 90.93 TC 58/SC 4
ISO 11622:2005
Gas cylinders -- Conditions for filling gas cylinders 90.99 TC 58/SC 4
ISO 11623:2002
Transportable gas cylinders -- Periodic inspection and testing of composite gas cylinders 90.60 TC 58/SC 4
ISO 11625:2007
Gas cylinders -- Safe handling 60.60 TC 58/SC 4
ISO 11755:2005
Gas cylinders -- Cylinder bundles for compressed and liquefied gases (excluding acetylene) -- Inspection at time of filling 90.60 TC 58/SC 4
ISO 12209-1:2000
Gas cylinders -- Outlet connections for gas cylinder valves for compressed breathable air -- Part 1: Yoke type connections 90.60 TC 58/SC 2
ISO 12209-2:2000
Gas cylinders -- Outlet connections for gas cylinder valves for compressed breathable air -- Part 2: Threaded connections 90.60 TC 58/SC 2
ISO 12209-3:2000
Gas cylinders -- Outlet connections for gas cylinder valves for compressed breathable air -- Part 3: Adaptor for 230 bar valves 90.60 TC 58/SC 2
ISO/TR 12391-1:2001
Gas cylinders -- Refillable seamless steel -- Performance tests -- Part 1: Philosophy, background and conclusions 60.60 TC 58/SC 3
ISO/TR 12391-2:2002
Gas cylinders -- Refillable seamless steel -- Performance tests -- Part 2: Fracture performance tests -- Monotonic burst tests 90.93 TC 58/SC 3
ISO/TR 12391-3:2002
Gas cylinders -- Refillable seamless steel -- Performance tests -- Part 3: Fracture performance tests -- Cyclical burst tests 90.93 TC 58/SC 3
ISO/TR 12391-4:2002
Gas cylinders -- Refillable seamless steel -- Performance tests -- Part 4: Flawed-cylinder cycle test 90.93 TC 58/SC 3
ISO/AWI 13086
Gas cylinders -- Factors of safety for composite cylinders 20.00 TC 58/SC 3
ISO 13340:2001
Transportable gas cylinders -- Cylinders valves for non-refillable cylinders -- Specification and prototype testing 90.60 TC 58/SC 2
ISO 13341:1997
Transportable gas cylinders -- Fitting of valves to gas cylinders 90.92 TC 58/SC 2
ISO/DIS 13341
Transportable gas cylinders -- Fitting of valves to gas cylinders 40.60 TC 58
ISO 13341:1997/Cor 1:1998
60.60 TC 58/SC 2
ISO/TR 13763:1994/Cor 1:1996
60.60 TC 58/SC 3
ISO 13769:2007
Gas cylinders -- Stamp marking 60.60 TC 58/SC 4
ISO 13770:1997
Aluminium alloy gas cylinders -- Operational requirements for avoidance of neck and shoulder cracks 90.93 TC 58/SC 4
ISO 14245:2006
Gas cylinders -- Specifications and testing of LPG cylinder valves -- Self-closing 90.20 TC 58/SC 2
ISO 14246:2001
Transportable gas cylinders -- Gas cylinder valves -- Manufacturing tests and inspections 90.92 TC 58/SC 2
ISO/TR 14600:2000
Gas cylinders -- International quality conformance system -- Basic rules 60.60 TC 58
ISO 15245-1:2001
Gas cylinders -- Parallel threads for connection of valves to gas cylinders -- Part 1: Specification 90.60 TC 58/SC 2
ISO 15245-2:2001
Gas cylinders -- Parallel threads for connection of valves to gas cylinders -- Part 2: Gauge inspection 90.60 TC 58/SC 2
ISO 15995:2006
Gas cylinders -- Specifications and testing of LPG cylinder valves -- Manually operated 90.20 TC 58/SC 2
ISO 15996:2005
Gas cylinders -- Residual pressure valves -- General requirements and type testing 90.60 TC 58/SC 2
ISO 15996:2005/Amd 1:2007
60.60 TC 58/SC 2
ISO 16148:2006
Gas cylinders -- Refillable seamless steel gas cylinders -- Acoustic emission testing (AT) for periodic inspection 90.20 TC 58/SC 4
ISO 16528-1:2007
Boilers and pressure vessels -- Part 1: Performance requirements 60.60 TC 11
ISO 16528-2:2007
Boilers and pressure vessels -- Part 2: Procedures for fulfilling the requirements of ISO 16528-1 60.60 TC 11
ISO 18172-1:2007
Gas cylinders -- Refillable welded stainless steel cylinders -- Part 1: Test pressure 6 MPa and below 60.60 TC 58/SC 3
ISO 18172-2:2007
Gas cylinders -- Refillable welded stainless steel cylinders -- Part 2: Test pressure greater than 6 MPa 60.60 TC 58/SC 3
ISO/AWI 19078
Gas cylinders -- Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles 20.00 TC 58/SC 4
ISO 19078:2006
Gas cylinders -- Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles 90.92 TC 58/SC 4
ISO 20703:2006
Gas cylinders -- Refillable welded aluminium-alloy cylinders -- Design, construction and testing 90.20 TC 58/SC 3
ISO/WD 20704
Gas cylinders -- Test methods on fracture performance for high strength aluminium 20.20 TC 58/SC 3
ISO 21007-1:2005
Gas cylinders -- Identification and marking using radio frequency identification technology -- Part 1: Reference architecture and terminology 90.60 TC 58/SC 4
ISO 21007-2:2005
Gas cylinders -- Identification and marking using radio frequency identification technology -- Part 2: Numbering schemes for radio frequency identification 90.92 TC 58/SC 4
ISO/NP 21007-2
Gas cylinders -- Identification and marking using radio frequency identification technology -- Part 2: Numbering schemes for radio frequency identification 10.99 TC 58/SC 4
ISO/AWI 21172-1
Gas cylinders -- Welded steel pressure drums up to 3 000 litres capacity for the transport of gases -- Design and construction -- Part 1: Capacities up to 1 000 litres 20.00 TC 58/SC 3
ISO 22434:2006
Transportable gas cylinders -- Inspection and maintenance of cylinder valves 60.60 TC 58/SC 2
ISO 22435:2007
Gas cylinders -- Cylinder valves with integrated pressure regulators -- Specification and type testing 60.60 TC 58/SC 2
ISO/TR 22694:2008
Gas cylinders -- Methods for establishing acceptance/rejection criteria for flaws in seamless steel and aluminium alloy cylinders at time of periodic inspection and testing 60.60 TC 58/SC 4
ISO 22991:2004
Gas cylinders -- Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) -- Design and construction 90.60 TC 58/SC 3
ISO 24431:2006
Gas cylinders -- Cylinders for compressed and liquefied gases (excluding acetylene) -- Inspection at time of filling 60.60 TC 58/SC 4
ISO 25760
Gas cylinders -- Operational procedures for the safe removal of valves from gas cylinders 60.00 TC 58/SC 4
ISO/DIS 26444
Gas cylinders -- Refillable welded aluminium alloy gas cylinders for greater than 60 bar test pressure - Design, construction and testing 40.60 TC 58/SC 3
ISO/DIS 28622
Pressure relief valves for transportable refillable cylinders for liquefied petroleum gas (LPG) 40.60 TC 58/SC 2

23.020.40 Cryogenic vessels
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO/AWI 12991
Liquefied natural gas -- Transportable tanks for use on board vehicles 20.00 TC 220
ISO 20421-1:2006
Cryogenic vessels -- Large transportable vacuum-insulated vessels -- Part 1: Design, fabrication, inspection and testing 90.20 TC 220
ISO 20421-1:2006/Cor 1:2007
60.60 TC 220
ISO 20421-2:2005
Cryogenic vessels -- Large transportable vacuum-insulated vessels -- Part 2: Operational requirements 90.60 TC 220
ISO 21009-1:2008
Cryogenic vessels -- Static vacuum-insulated vessels -- Part 1: Design, fabrication, inspection and tests 60.60 TC 220
ISO 21009-2:2006
Cryogenic vessels -- Static vacuum insulated vessels -- Part 2: Operational requirements 60.60 TC 220
ISO 21010:2004
Cryogenic vessels -- Gas/materials compatibility 90.60 TC 220
ISO 21011:2008
Cryogenic vessels -- Valves for cryogenic service 60.60 TC 220
ISO 21012:2006
Cryogenic vessels -- Hoses 60.60 TC 220
ISO 21013-1:2008
Cryogenic vessels -- Pressure-relief accessories for cryogenic service -- Part 1: Reclosable pressure-relief valves 60.60 TC 220
ISO 21013-2:2007
Cryogenic vessels -- Pressure-relief accessories for cryogenic service -- Part 2: Non-reclosable pressure-relief devices 60.60 TC 220
ISO 21013-3:2006
Cryogenic vessels -- Pressure-relief accessories for cryogenic service -- Part 3: Sizing and capacity determination 90.20 TC 220
ISO/AWI 21013-4
Cryogenic vessels -- Pilot operated pressure relief devices -- Part 4: Pressure-relief accessories for cryogenic service 20.00 TC 220
ISO 21014:2006
Cryogenic vessels -- Cryogenic insulation performance 60.60 TC 220
ISO 21028-1:2004
Cryogenic vessels -- Toughness requirements for materials at cryogenic temperature -- Part 1: Temperatures below -80 degrees C 90.60 TC 220
ISO 21028-2:2004
Cryogenic vessels -- Toughness requirements for materials at cryogenic temperature -- Part 2: Temperatures between -80 degrees C and -20 degrees C 90.60 TC 220
ISO 21029-1:2004
Cryogenic vessels -- Transportable vacuum insulated vessels of not more than 1 000 litres volume -- Part 1: Design, fabrication, inspection and tests 90.60 TC 220
ISO 21029-2:2004
Cryogenic vessels -- Transportable vacuum insulated vessels of not more than 1 000 litres volume -- Part 2: Operational requirements 90.60 TC 220
ISO 23208:2005
Cryogenic vessels -- Cleanliness for cryogenic service 90.60 TC 220
ISO 24490:2005
Cryogenic vessels -- Pumps for cryogenic service 90.60 TC 220

23.020.99 Other fluid storage devices


23.040 Pipeline components and pipelines
Pipeline components and pipelines for petroleum products and natural gas, see 75.200
ICS Field
23.040.01 Pipeline components and pipelines in general
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 6412-1:1989
Technical drawings -- Simplified representation of pipelines -- Part 1: General rules and orthogonal representation 90.93 TC 10/SC 10
ISO 6412-2:1989
Technical drawings -- Simplified representation of pipelines -- Part 2: Isometric projection 90.93 TC 10/SC 10
ISO 6412-3:1993
Technical drawings -- Simplified representation of pipelines -- Part 3: Terminal features of ventilation and drainage systems 90.60 TC 10/SC 10
ISO 6708:1995
Pipework components -- Definition and selection of DN (nominal size) 90.92 TC 5/SC 10
ISO/DIS 6708
Pipework components -- Definition and selection of DN, NPS and A 40.60 TC 5/SC 10
ISO/DIS 7268
Pipe components -- Definition and selection of PN, Class and K 40.60 TC 5/SC 10
ISO 7268:1983
Pipe components -- Definition of nominal pressure 90.92 TC 5/SC 10
ISO 7268:1983/Amd 1:1984
90.92 TC 5/SC 10
ISO 9311-1:2005
Adhesives for thermoplastic piping systems -- Part 1: Determination of film properties 90.93 TC 138/SC 5
ISO 9311-2:2002
Adhesives for thermoplastic piping systems -- Part 2: Determination of shear strength 90.92 TC 138/SC 5
ISO/NP 9311-2
Adhesives for thermoplastic piping systems -- Part 2: Determination of shear strength 10.99 TC 138/SC 5
ISO 9311-3:2005
Adhesives for thermoplastic piping systems -- Part 3: Test method for the determination of resistance to internal pressure 90.93 TC 138/SC 5
ISO/TS 10465-1:2007
Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) -- Part 1: Installation procedures 60.60 TC 138/SC 6
ISO/TR 10465-2:2007
Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) -- Part 2: Comparison of static calculation methods 60.60 TC 138/SC 6
ISO/TR 10465-3:2007
Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) -- Part 3: Installation parameters and application limits 60.60 TC 138/SC 6
ISO 10802:1992
Ductile iron pipelines -- Hydrostatic testing after installation 90.20 TC 5/SC 2
ISO/CD 10804
Restrained joint systems for ductile iron pipelines -- Design rules and type testing 30.99 TC 5/SC 2
ISO 10804-1:1996
Restrained joint systems for ductile iron pipelines -- Part 1: Design rules and type testing 90.92 TC 5/SC 2
ISO 10931:2005
Plastics piping systems for industrial applications -- Poly(vinylidene fluoride) (PVDF) -- Specifications for components and the system 90.93 TC 138/SC 3
ISO/DIS 11295
Guidance on the classification and design of plastics piping systems used for renovation 40.99 TC 138
ISO/TR 11295:1992
Techniques for rehabilitation of pipeline sytems by the use of plastics pipes and fittings 90.92 TC 138
ISO/CD 13056
Plastics piping systems -- Pressure systems for hot and cold water -- Test method for leaktightness under vacuum 30.60 TC 138/SC 5
ISO 13845:2000
Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes -- Test method for leaktightness under internal pressure and with angular deflection 90.93 TC 138/SC 2
ISO 13951:2001
Plastics piping systems -- Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading 90.93 TC 138/SC 5
ISO 14617-3:2002
Graphical symbols for diagrams -- Part 3: Connections and related devices 90.60 TC 10/SC 10
ISO 15493:2003
Plastics piping systems for industrial applications -- Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) -- Specifications for components and the system -- Metric series 90.93 TC 138/SC 3
ISO 15493:2003/Cor 1:2004
60.60 TC 138/SC 3
ISO 15494:2003
Plastics piping systems for industrial applications -- Polybutene (PB), polyethylene (PE) and polypropylene (PP) -- Specifications for components and the system -- Metric series 90.93 TC 138/SC 3
ISO 15853:1999
Thermoplastics materials -- Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding 90.93 TC 138/SC 5
ISO/TS 15874-7:2003
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 7: Guidance for the assessment of conformity 90.20 TC 138/SC 2
ISO 15875-1:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 1: General 90.93 TC 138/SC 2
ISO 15875-1:2003/Amd 1:2007
60.60 TC 138/SC 2
ISO 15876-1:2003
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 1: General 90.93 TC 138/SC 2
ISO 15876-1:2003/Amd 1:2007
60.60 TC 138/SC 2
ISO/PRF TS 15877-7
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 7: Guidance for the assessment of conformity 50.20 TC 138/SC 2
ISO/TS 15877-7:2003
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 7: Guidance for the assessment of conformity 90.92 TC 138/SC 2
ISO/CD TR 17767
Centrifugal pumps -- Piping requirements 30.00 TC 115/SC 3
ISO 21003-1:2008
Multilayer piping systems for hot and cold water installations inside buildings -- Part 1: General 60.60 TC 138/SC 2
ISO 21003-5:2008
Multilayer piping systems for hot and cold water installations inside buildings -- Part 5: Fitness for purpose of the system 60.60 TC 138/SC 2
ISO/DIS 22391-1
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 1: General 40.99 TC 138/SC 2
ISO 22391-1:2007
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 1: General 90.92 TC 138/SC 2
ISO 22391-5:2007
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 5: Fitness for purpose of the system 90.92 TC 138/SC 2
ISO/DIS 22391-5
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 5: Fitness for purpose of the system 40.99 TC 138/SC 2

23.040.10 Iron and steel pipes
Steel pipes and tubes for specific use, see 77.140.75
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 65:1981
Carbon steel tubes suitable for screwing in accordance with ISO 7-1 90.93 TC 5/SC 1
ISO 1127:1992
Stainless steel tubes -- Dimensions, tolerances and conventional masses per unit length 90.93 TC 5/SC 1
ISO 3304:1985
Plain end seamless precision steel tubes -- Technical conditions for delivery 90.93 TC 5/SC 1
ISO 3305:1985
Plain end welded precision steel tubes -- Technical conditions for delivery 90.93 TC 5/SC 1
ISO 3306:1985
Plain end as-welded and sized precision steel tubes -- Technical conditions for delivery 90.93 TC 5/SC 1
ISO 3545-1:1989
Steel tubes and fittings -- Symbols for use in specifications -- Part 1: Tubes and tubular accessories with circular cross-section 90.93 TC 5/SC 1
ISO 3545-2:1989
Steel tubes and fittings -- Symbols for use in specifications -- Part 2: Square and rectangular hollow sections 90.93 TC 5/SC 1
ISO 4179:2005
Ductile iron pipes and fittings for pressure and non-pressure pipelines -- Cement mortar lining 90.60 TC 5/SC 2
ISO 4200:1991
Plain end steel tubes, welded and seamless -- General tables of dimensions and masses per unit length 90.93 TC 5/SC 1
ISO 5252:1991
Steel tubes -- Tolerance systems 90.93 TC 5/SC 1
ISO 5256:1985
Steel pipes and fittings for buried or submerged pipe lines -- External and internal coating by bitumen or coal tar derived materials 90.93 TC 5/SC 1
ISO 6761:1981
Steel tubes -- Preparation of ends of tubes and fittings for welding 90.93 TC 5/SC 1
ISO 7598:1988
Stainless steel tubes suitable for screwing in accordance with ISO 7-1 90.93 TC 5/SC 1
ISO 8179-1:2004
Ductile iron pipes -- External zinc-based coating -- Part 1: Metallic zinc with finishing layer 90.93 TC 5/SC 2
ISO 8179-2:1995
Ductile iron pipes -- External zinc coating -- Part 2: Zinc rich paint with finishing layer 90.93 TC 5/SC 2
ISO 8180:2006
Ductile iron pipelines -- Polyethylene sleeving for site application 60.60 TC 5/SC 2
ISO 9095:1990
Steel tubes -- Continuous character marking and colour coding for material identification 90.93 TC 5/SC 1
ISO 9302:1994
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Electromagnetic testing for verification of hydraulic leak-tightness 90.92 TC 17/SC 19
ISO 9303:1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of longitudinal imperfections 90.92 TC 17/SC 19
ISO 9304:1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Eddy current testing for the detection of imperfections 90.92 TC 17/SC 19
ISO 9305:1989
Seamless steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of transverse imperfections 90.92 TC 17/SC 19
ISO 9329-1:1989
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 1: Unalloyed steels with specified room temperature properties 90.60 TC 17/SC 19
ISO 9329-2:1997
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 2: Unalloyed and alloyed steels with specified elevated temperature properties 90.60 TC 17/SC 19
ISO 9329-3:1997
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 3: Unalloyed and alloyed steels with specified low temperature properties 90.60 TC 17/SC 19
ISO 9329-4:1997
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 4: Austenitic stainless steels 90.60 TC 17/SC 19
ISO 9330-1:1990
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 1: Unalloyed steel tubes with specified room temperature properties 90.93 TC 17/SC 19
ISO 9330-2:1997
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties 90.60 TC 17/SC 19
ISO 9330-3:1997
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties 90.60 TC 17/SC 19
ISO 9330-4:2000
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties 90.93 TC 17/SC 19
ISO 9330-5:2000
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties 90.93 TC 17/SC 19
ISO 9330-6:1997
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 6: Longitudinally welded austenitic stainless steel tubes 90.60 TC 17/SC 19
ISO 9402:1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections 90.92 TC 17/SC 19
ISO 9598:1989
Seamless steel tubes for pressure purposes -- Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections 90.92 TC 17/SC 19
ISO 9764:1989
Electric resistance and induction welded steel tubes for pressure purposes -- Ultrasonic testing of the weld seam for the detection of longitudinal imperfections 90.92 TC 17/SC 19
ISO 9765:1990
Submerged arc-welded steel tubes for pressure purposes -- Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections 90.92 TC 17/SC 19
ISO 10124:1994
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Ultrasonic testing for the detection of laminar imperfections 90.92 TC 17/SC 19
ISO/DIS 10332
Non-destructive testing of steel tubes -- Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness as a substitution for the hydraulic test 40.20 TC 17/SC 19
ISO 10332:1994
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Ultrasonic testing for the verification of hydraulic leak-tightness 90.92 TC 17/SC 19
ISO 10543:1993
Seamless and hot-stretch-reduced welded steel tubes for pressure purposes -- Full peripheral ultrasonic thickness testing 90.92 TC 17/SC 19
ISO 10803:1999
Design method for ductile iron pipes 90.92 TC 5/SC 2
ISO/CD 10803
Design method for ductile iron pipes 30.99 TC 5/SC 2
ISO/DIS 10893-1
Non-destructive testing of steel tubes -- Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leak-tightness instead of the hydrostatic test 40.20 TC 17/SC 19
ISO/DIS 10893-2
Non-destructive testing of steel tubes -- Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-3
Non-destructive testing of steel tubes -- Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transversal imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-4
Non-destructive testing of steel tubes -- Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-5
Non-destructive testing of steel tubes -- Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-6
Non-destructive testing of steel tubes -- Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-7
Non-destructive testing of steel tubes -- Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-8
Non-destructive testing of steel tubes -- Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-9
Non-destructive testing of steel tubes -- Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes 40.20 TC 17/SC 19
ISO/DIS 10893-10
Non-destructive testing of steel tubes -- Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transversal imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-11
Non-destructive testing of steel tubes -- Part 11: Automated ultrasonic testing of weld seam of welded steel tubes for the detection of longitudinal and/or transversal imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-12
Non-destructive testing of steel tubes -- Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes 40.20 TC 17/SC 19
ISO 11496:1993
Seamless and welded steel tubes for pressure purposes -- Ultrasonic testing of tube ends for the detection of laminar imperfections 90.92 TC 17/SC 19
ISO 12094:1994
Welded steel tubes for pressure purposes -- Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes 90.92 TC 17/SC 19
ISO 12095:1994
Seamless and welded steel tubes for pressure purposes -- Liquid penetrant testing 90.92 TC 17/SC 19
ISO 12096:1996
Submerged arc-welded steel tubes for pressure purposes -- Radiographic testing of the weld seam for the detection of imperfections 90.92 TC 17/SC 19
ISO 13663:1995
Welded steel tubes for pressure purposes -- Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections 90.92 TC 17/SC 19
ISO 13664:1997
Seamless and welded steel tubes for pressure purposes -- Magnetic particle inspection of the tube ends for the detection of laminar imperfections 90.92 TC 17/SC 19
ISO 13665:1997
Seamless and welded steel tubes for pressure purposes -- Magnetic particle inspection of the tube body for the detection of surface imperfections 90.92 TC 17/SC 19
ISO 16132:2004
Ductile iron pipes and fittings -- Seal coats for cement mortar linings 90.93 TC 5/SC 2
ISO 16134:2006
Earthquake- and subsidence-resistant design of ductile iron pipelines 90.20 TC 5/SC 2

23.040.15 Non-ferrous metal pipes
Non-ferrous metal pipes and tubes for specific use, see 77.150
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 6207:1992
Seamless nickel and nickel alloy tube 90.60 TC 155/SC 2
ISO 6362-1:1986
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles -- Part 1: Technical conditions for inspection and delivery 90.92 TC 79/SC 6
ISO 6362-2:1990
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles -- Part 2: Mechanical properties 90.92 TC 79/SC 6
ISO 6363-1:1988
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes -- Part 1: Technical conditions for inspection and delivery 90.92 TC 79/SC 6
ISO 6363-2:1993
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes -- Part 2: Mechanical properties 90.92 TC 79/SC 6
ISO 7773:1983
Magnesium alloys -- Round bars and tubes -- Dimensional tolerances 90.60 TC 79/SC 5

23.040.20 Plastics pipes
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 161-1:1996
Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures -- Part 1: Metric series 90.93 TC 138
ISO 161-2:1996
Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures -- Part 2: Inch-based series 90.93 TC 138
ISO 265-1:1988
Pipes and fittings of plastics materials -- Fittings for domestic and industrial waste pipes -- Basic dimensions: Metric series -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U) 90.93 TC 138/SC 1
ISO 1167-1:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 1: General method 90.20 TC 138/SC 5
ISO 1167-2:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 2: Preparation of pipe test pieces 90.20 TC 138/SC 5
ISO 1167-3:2007
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 3: Preparation of components 60.60 TC 138/SC 5
ISO 1167-4:2007
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 4: Preparation of assemblies 60.60 TC 138/SC 5
ISO/FDIS 1452-1
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 1: General 50.00 TC 138/SC 2
ISO/FDIS 1452-2
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 2: Pipes 50.00 TC 138/SC 2
ISO/FDIS 1452-3
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 3: Fittings 50.00 TC 138/SC 2
ISO/FDIS 1452-4
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 4: Valves 50.00 TC 138/SC 2
ISO/FDIS 1452-5
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 5: Fitness for purpose of the system 50.00 TC 138/SC 2
ISO 1746:1998
Rubber or plastics hoses and tubing -- Bending tests 90.93 TC 45/SC 1
ISO 1746:1998/Cor 1:1999
60.60 TC 45/SC 1
ISO 2505:2005
Thermoplastics pipes -- Longitudinal reversion -- Test method and parameters 90.60 TC 138/SC 5
ISO 2507-1:1995
Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 1: General test method 90.93 TC 138/SC 5
ISO 2507-2:1995
Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes 90.93 TC 138/SC 5
ISO 2507-3:1995
Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings 90.93 TC 138/SC 5
ISO 3114:1977
Unplasticized polyvinyl chloride (PVC) pipes for potable water supply -- Extractability of lead and tin -- Test method 90.93 TC 138/SC 5
ISO 3126:2005
Plastics piping systems -- Plastics components -- Determination of dimensions 90.60 TC 138/SC 5
ISO 3127:1994
Thermoplastics pipes -- Determination of resistance to external blows -- Round-the-clock method 90.93 TC 138/SC 5
ISO/DIS 3213
Polypropylene (PP) pipes -- Effect of time and temperature on the expected strength 40.99 TC 138/SC 5
ISO 3213:1996
Polypropylene (PP) pipes -- Effect of time and temperature on expected strength 90.92 TC 138/SC 5
ISO 3514:1976
Chlorinated polyvinyl chloride (CPVC) pipes and fittings -- Specification and determination of density 90.93 TC 138/SC 5
ISO 3633:2002
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Unplasticized poly(vinyl chloride) (PVC-U) 90.93 TC 138/SC 1
ISO 4059:1978
Polyethylene (PE) pipes -- Pressure drop in mechanical pipe-jointing systems -- Method of test and requirements 90.93 TC 138/SC 5
ISO 4065:1996
Thermoplastics pipes -- Universal wall thickness table 90.93 TC 138
ISO/TR 4191:1989
Unplasticized polyvinyl chloride (PVC-U) pipes for water supply -- Recommended practice for laying 90.92 TC 138/SC 2
ISO 4422-1:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 1: General 90.92 TC 138/SC 2
ISO 4422-2:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 2: Pipes (with or without integral sockets) 90.92 TC 138/SC 2
ISO 4422-3:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 3: Fittings and joints 90.92 TC 138/SC 2
ISO 4422-4:1997
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 4: Valves and ancillary equipment 90.92 TC 138/SC 2
ISO 4422-5:1997
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 5: Fitness for purpose of the system 90.92 TC 138/SC 2
ISO 4427-1:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 1: General 60.60 TC 138/SC 2
ISO 4427-1:2007/Cor 1:2008
60.60 TC 138/SC 2
ISO 4427-2:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 2: Pipes 60.60 TC 138/SC 2
ISO 4427-5:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 5: Fitness for purpose of the system 60.60 TC 138/SC 2
ISO 4433-1:1997
Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 1: Immersion test method 90.93 TC 138/SC 3
ISO 4433-2:1997
Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 2: Polyolefin pipes 90.93 TC 138/SC 3
ISO 4433-3:1997
Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 3: Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly (vinyl chloride) (PVC-HI) and chlorinated poly (vinyl chloride) (PVC-C) pipes 90.93 TC 138/SC 3
ISO 4433-4:1997
Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 4: Poly(vinylidene fluoride) (PVDF) pipes 90.93 TC 138/SC 3
ISO 4435:2003
Plastics piping systems for non-pressure underground drainage and sewerage -- Unplasticized poly(vinyl chloride) (PVC-U) 90.60 TC 138/SC 1
ISO 4439:1979
Unplasticized polyvinyl chloride (PVC) pipes and fittings -- Determination and specification of density 90.93 TC 138/SC 5
ISO 6259-1:1997
Thermoplastics pipes -- Determination of tensile properties -- Part 1: General test method 90.93 TC 138/SC 5
ISO 6259-2:1997
Thermoplastics pipes -- Determination of tensile properties -- Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI) 90.93 TC 138/SC 5
ISO 6259-3:1997
Thermoplastics pipes -- Determination of tensile properties -- Part 3: Polyolefin pipes 90.93 TC 138/SC 5
ISO 6964:1986
Polyolefin pipes and fittings -- Determination of carbon black content by calcination and pyrolysis -- Test method and basic specification 90.93 TC 138/SC 5
ISO/TS 7024:2005
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Thermoplastics -- Recommended practice for installation 90.60 TC 138/SC 1
ISO/TR 7073:1988
Recommended techniques for the installation of unplasticized poly(vinyl chloride) (PVC-U) buried drains and sewers 90.60 TC 138/SC 1
ISO/TR 7074:1986
Performance requirements for plastics pipes and fittings for use in underground drainage and sewage 90.20 TC 138/SC 1
ISO 7245:1984
Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) -- General specification for moulding and extrusion materials 90.93 TC 138/SC 5
ISO 7246:1984
Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) -- General specification for moulding and extrusion materials 90.93 TC 138/SC 5
ISO 7432:2002
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals 90.93 TC 138/SC 6
ISO 7509:2000
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of time to failure under sustained internal pressure 90.93 TC 138/SC 6
ISO 7510:1997
Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method 90.93 TC 138/SC 6
ISO 7511:1999
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the leaktightness of the wall under short-term internal pressure 90.93 TC 138/SC 6
ISO 7671:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Polypropylene (PP) 90.93 TC 138/SC 1
ISO 7675:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Chlorinated poly(vinyl chloride) (PVC-C) 90.60 TC 138/SC 1
ISO 7682:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Acrylonitrile-butadiene-styrene (ABS) 90.93 TC 138/SC 1
ISO 7684:1997
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the creep factor under dry conditions 90.93 TC 138/SC 6
ISO 7685:1998
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness 90.93 TC 138/SC 6
ISO 7686:2005
Plastics pipes and fittings -- Determination of opacity 90.93 TC 138/SC 5
ISO 8283-1:1991
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) 90.93 TC 138/SC 1
ISO 8283-2:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 2: Polyethylene (PE) 90.93 TC 138/SC 1
ISO 8283-3:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 3: Polypropylene (PP) 90.93 TC 138/SC 1
ISO 8283-4:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 4: Acrylonitrile/butadiene/styrene (ABS) 90.93 TC 138/SC 1
ISO 8361-1:1991
Thermoplastics pipes and fittings -- Water absorption -- Part 1: General test method 90.93 TC 138/SC 5
ISO 8361-2:1991
Thermoplastics pipes and fittings -- Water absorption -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings 90.60 TC 138/SC 5
ISO 8361-3:1991
Thermoplastics pipes and fittings -- Water absorption -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings 90.93 TC 138/SC 5
ISO 8483:2003
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of bolted flange joints 90.60 TC 138/SC 6
ISO 8513:2000
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of longitudinal tensile properties 90.92 TC 138/SC 6
ISO 8521:1998
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the apparent initial circumferential tensile strength 90.92 TC 138/SC 6
ISO/FDIS 8521
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test methods for the determination of the apparent initial circumferential tensile strength 50.20 TC 138/SC 6
ISO 8533:2003
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of cemented or wrapped joints 90.60 TC 138/SC 6
ISO 8770:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Polyethylene (PE) 90.93 TC 138/SC 1
ISO 8772:2006
Plastics piping systems for non-pressure underground drainage and sewerage -- Polyethylene (PE) 60.60 TC 138/SC 1
ISO 8773:2006
Plastics piping systems for non-pressure underground drainage and sewerage -- Polypropylene (PP) 60.60 TC 138/SC 1
ISO/DIS 8779
Plastics piping systems -- Polyethylene (PE) pipes for irrigation -- Specifications 40.60 TC 138/SC 2
ISO 8779:2001
Polyethylene (PE) pipes for irrigation laterals -- Specifications 90.92 TC 138/SC 2
ISO 8795:2001
Plastics piping systems for the transport of water intended for human consumption -- Migration assessment -- Determination of migration values of plastics pipes and fittings and their joints 90.93 TC 138/SC 5
ISO 8796:2004
Polyethylene PE 32 and PE 40 pipes for irrigation laterals -- Susceptibility to environmental stress cracking induced by insert-type fittings -- Test method and requirements 90.93 TC 138/SC 2
ISO 9080:2003
Plastics piping and ducting systems -- Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation 90.92 TC 138/SC 5
ISO/CD 9080
Plastics piping and ducting systems -- Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation 30.60 TC 138/SC 5
ISO 9852:2007
Unplasticized poly(vinyl chloride) (PVC-U) pipes -- Dichloromethane resistance at specified temperature (DCMT) -- Test method 60.60 TC 138/SC 5
ISO 9854-1:1994
Thermoplastics pipes for the transport of fluids -- Determination of pendulum impact strength by the Charpy method -- Part 1: General test method 90.93 TC 138/SC 5
ISO 9854-2:1994
Thermoplastics pipes for the transport of fluids -- Determination of pendulum impact strength by the Charpy method -- Part 2: Test conditions for pipes of various materials 90.93 TC 138/SC 5
ISO 9896:1996
Plastics traps for discharge pipework systems inside buildings 90.93 TC 138/SC 1
ISO 9967:2007
Thermoplastics pipes -- Determination of creep ratio 60.60 TC 138/SC 5
ISO 9969:2007
Thermoplastics pipes -- Determination of ring stiffness 60.60 TC 138/SC 5
ISO 10146:1997
Crosslinked polyethylene (PE-X) pipes -- Effect of time and temperature on the expected strength 90.93 TC 138/SC 5
ISO 10147:2004
Pipes and fittings made of crosslinked polyethylene (PE-X) -- Estimation of the degree of crosslinking by determination of the gel content 90.93 TC 138/SC 5
ISO 10147:2004/Amd 1:2008
60.60 TC 138/SC 5
ISO/TR 10358:1993
Plastics pipes and fittings -- Combined chemical-resistance classification table 90.93 TC 138/SC 3
ISO 10466:1997
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test method to prove the resistance to initial ring deflection 90.93 TC 138/SC 6
ISO 10467:2004
Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin 90.93 TC 138/SC 6
ISO 10467:2004/DAmd 1
40.99 TC 138/SC 6
ISO 10468:2003
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor 90.60 TC 138/SC 6
ISO 10471:2003
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions 90.60 TC 138/SC 6
ISO/TR 10501:1993
Thermoplastics pipes for the transport of liquids under pressure -- Calculation of head losses 90.93 TC 138/SC 2
ISO 10508:2006
Plastics piping systems for hot and cold water installations -- Guidance for classification and design 90.20 TC 138/SC 2
ISO 10639:2004
Plastics piping systems for pressure and non-pressure water supply -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin 90.93 TC 138/SC 6
ISO 10639:2004/DAmd 1
40.99 TC 138/SC 6
ISO 10928:1997
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use 90.92 TC 138/SC 6
ISO/FDIS 10928
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use 50.00 TC 138/SC 6
ISO 10952:2008
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack for the inside of a section in a deflected condition 60.60 TC 138/SC 6
ISO/CD 10986
Plasitcs piping systems for pressure and non-pressure applications -- Installation of pipes above ground -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin 30.60 TC 138/SC 6
ISO 11173:1994
Thermoplastics pipes -- Determination of resistance to external blows -- Staircase method 90.93 TC 138/SC 5
ISO/FDIS 11296-1
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 1: General 50.00 TC 138
ISO/FDIS 11296-3
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 3: Lining with close-fit pipes 50.00 TC 138
ISO/FDIS 11296-4
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 4: Lining with cured-in-places pipes 50.00 TC 138
ISO/DIS 11298-1
Plastics piping systems for renovation of underground water supply networks -- Part 1: General 40.99 TC 138
ISO/DIS 11298-3
Plastics piping systems for renovation of underground water supply networks -- Part 3: Lining with close-fit-pipes 40.99 TC 138
ISO/NP 11299-1
Plastics piping systems for renovation of underground gas supply networks -- Part 1: General 10.99 TC 138
ISO/NP 11299-3
Plastics piping systems for renovation of underground gas supply networks -- Part 3: Limning with close-fit pipes 10.99 TC 138
ISO/AWI 11619
Specification for polyurethane tubing for use primarily in pneumatic installations 20.00 TC 45/SC 1
ISO 11673:2005
Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes -- Determination of the fracture toughness properties 90.93 TC 138/SC 5
ISO 11922-1:1997
Thermoplastics pipes for the conveyance of fluids -- Dimensions and tolerances -- Part 1: Metric series 90.93 TC 138
ISO 11922-2:1997
Thermoplastics pipes for the conveyance of fluids -- Dimensions and tolerances -- Part 2: Inch-based series 90.93 TC 138
ISO 12091:1995
Structured-wall thermoplastics pipes -- Oven test 90.93 TC 138/SC 5
ISO 12162:1995
Thermoplastics materials for pipes and fittings for pressure applications -- Classification and designation -- Overall service (design) coefficient 90.92 TC 138/SC 5
ISO/FDIS 12162
Thermoplastics materials for pipes and fittings for pressure applications -- Classification, design coefficient, and designation 50.00 TC 138/SC 5
ISO 12176-1:2006
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 1: Butt fusion 60.60 TC 138/SC 4
ISO 12176-2:2008
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 2: Electrofusion 60.60 TC 138/SC 4
ISO 12176-3:2006
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 3: Operator's badge 90.20 TC 138/SC 4
ISO 12176-4:2003
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 4: Traceability coding 90.60 TC 138/SC 4
ISO 12230:1996
Polybutene (PB) pipes -- Effect of time and temperature on the expected strength 90.93 TC 138/SC 5
ISO/NP 13147
Plastics pipes and fittings ? Slow peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 50 mm 10.99 TC 138/SC 5
ISO/DIS 13229
Thermoplastics piping systems for non-pressure applications -- Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings -- Determination of the viscosity number and K-value 40.20 TC 138/SC 1
ISO/DIS 13254
Thermoplastics piping systems for non-pressure applications -- Test method for watertightness 40.20 TC 138/SC 1
ISO/DIS 13255
Thermoplastics piping systems for soil and waste discharge inside buildings -- Test method for airtightness of joints 40.20 TC 138/SC 1
ISO/DIS 13257
Thermoplastics piping systems for non pressure applications -- Test method for resistance to elevated temperature cycling 40.20 TC 138/SC 1
ISO/DIS 13259
Thermoplastics piping systems for underground non-pressure applications -- Test method for leaktightness of elastomeric sealing ring type joints 40.20 TC 138/SC 1
ISO/DIS 13260
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Test method for resistance to combined temperature cycling and external loading 40.20 TC 138/SC 1
ISO/DIS 13262
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics spirally-formed structured-wall pipes -- Determination of the tensile strength of a seam 40.20 TC 138/SC 1
ISO/DIS 13263
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for impact strength 40.20 TC 138/SC 1
ISO/DIS 13264
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for mechanical strength or flexibility of fabricated fittings 40.20 TC 138/SC 1
ISO/DIS 13265
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Joints for buried non-pressure applications -- Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure 40.20 TC 138/SC 1
ISO/DIS 13266
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of resistance against surface and traffic loading 40.20 TC 138/SC 1
ISO/DIS 13267
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics inspection chamber and manhole bases -- Test method for buckling resistance 40.20 TC 138/SC 1
ISO/DIS 13268
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of ring stiffness 40.20 TC 138/SC 1
ISO/DIS 13272
Plastics piping systems for non-pressure underground drainage and sewerage -- Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) -- Specifications for manholes and inspection chambers in traffic areas and underground installations 40.20 TC 138/SC 1
ISO 13477:2008
Thermoplastics pipes for the conveyance of fluids -- Determination of resistance to rapid crack propagation (RCP) -- Small-scale steady-state test (S4 test) 60.60 TC 138/SC 5
ISO 13478:2007
Thermoplastics pipes for the conveyance of fluids -- Determination of resistance to rapid crack propagation (RCP) -- Full-scale test (FST) 60.60 TC 138/SC 5
ISO/FDIS 13479
Polyolefin pipes for the conveyance of fluids -- Determination of resistance to crack propagation -- Test method for slow crack growth on notched pipes 50.00 TC 138/SC 5
ISO 13479:1997
Polyolefin pipes for the conveyance of fluids -- Determination of resistance to crack propagation -- Test method for slow crack growth on notched pipes (notch test) 90.92 TC 138/SC 5
ISO 13480:1997
Polyethylene pipes -- Resistance to slow crack growth -- Cone test method 90.93 TC 138/SC 5
ISO 13760:1998
Plastics pipes for the conveyance of fluids under pressure -- Miner's rule -- Calculation method for cumulative damage 90.93 TC 138/SC 5
ISO 13761:1996
Plastics pipes and fittings -- Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C 90.93 TC 138/SC 5
ISO 13844:2000
Plastics piping systems -- Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes -- Test method for leaktightness under negative pressure 90.93 TC 138/SC 2
ISO 13845:2000
Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes -- Test method for leaktightness under internal pressure and with angular deflection 90.93 TC 138/SC 2
ISO 13950:2007
Plastics pipes and fittings -- Automatic recognition systems for electrofusion joints 60.60 TC 138/SC 4
ISO 13950:2007/Cor 1:2008
60.60 TC 138/SC 4
ISO 13966:1998
Thermoplastics pipes and fittings -- Nominal ring stiffnesses 90.93 TC 138
ISO 13968:2008
Plastics piping and ducting systems -- Thermoplastics pipes -- Determination of ring flexibility 60.60 TC 138/SC 5
ISO 14236:2000
Plastics pipes and fittings -- Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems 90.93 TC 138/SC 2
ISO 14531-1:2002
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 1: Pipes 90.93 TC 138/SC 4
ISO 14531-2:2004
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 2: Fittings for heat-fusion jointing 90.93 TC 138/SC 4
ISO 14531-3:2006
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 3: Fittings for mechanical jointing (including PE-X/metal transitions) 90.20 TC 138/SC 4
ISO 14531-4:2006
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 4: System design and installation guidelines 90.20 TC 138/SC 4
ISO 14828:2003
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor 90.60 TC 138/SC 6
ISO 15306:2003
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the resistance to cyclic internal pressure 90.93 TC 138/SC 6
ISO 15439-1:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) -- Polyamide (PA) -- Part 1: General 60.60 TC 138/SC 4
ISO 15439-2:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) -- Polyamide (PA) -- Part 2: Pipes 60.60 TC 138/SC 4
ISO 15439-3:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) -- Polyamide (PA) -- Part 3: Fittings 60.60 TC 138/SC 4
ISO/NP 15874-1
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 1: General 10.99 TC 138/SC 2
ISO 15874-1:2003
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 1: General 90.92 TC 138/SC 2
ISO 15874-1:2003/Amd 1:2007
60.60 TC 138/SC 2
ISO 15874-2:2003
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 2: Pipes 90.92 TC 138/SC 2
ISO/NP 15874-2
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 2: Pipes 10.99 TC 138/SC 2
ISO 15874-2:2003/Amd 1:2007
60.60 TC 138/SC 2
ISO 15874-5:2003
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 5: Fitness for purpose of the system 90.92 TC 138/SC 2
ISO/NP 15874-5
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 5: Fitness for purpose of the system 10.99 TC 138/SC 2
ISO 15875-2:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 2: Pipes 90.93 TC 138/SC 2
ISO 15875-2:2003/Amd 1:2007
60.60 TC 138/SC 2
ISO 15875-5:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 5: Fitness for purpose of the system 90.93 TC 138/SC 2
ISO 15875-5:2003/Cor 1:2007
60.60 TC 138/SC 2
ISO/TS 15875-7:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 7: Guidance for the assessment of conformity 90.20 TC 138/SC 2
ISO 15876-2:2003
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 2: Pipes 90.93 TC 138/SC 2
ISO 15876-2:2003/Amd 1:2007
60.60 TC 138/SC 2
ISO 15876-5:2003
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 5: Fitness for purpose of the system 90.93 TC 138/SC 2
ISO/TS 15876-7:2003
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 7: Guidance for the assessment of conformity 90.20 TC 138/SC 2
ISO 15877-1:2009
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 1: General 60.60 TC 138/SC 2
ISO 15877-1:2009/CD Amd 1
30.99 TC 138/SC 2
ISO 15877-2:2009
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 2: Pipes 60.60 TC 138/SC 2
ISO 15877-2:2009/CD Amd 1
30.99 TC 138/SC 2
ISO 15877-5:2009
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 5: Fitness for purpose of the system 60.60 TC 138/SC 2
ISO 15877-5:2009/CD Amd 1
30.99 TC 138/SC 2
ISO/TS 15877-7:2003
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 7: Guidance for the assessment of conformity 90.92 TC 138/SC 2
ISO/PRF TS 15877-7
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 7: Guidance for the assessment of conformity 50.20 TC 138/SC 2
ISO 16241:2005
Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT) 90.93 TC 138/SC 5
ISO 16422:2006
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure -- Specifications 90.20 TC 138/SC 2
ISO 16871:2003
Plastics piping and ducting systems -- Plastics pipes and fittings -- Method for exposure to direct (natural) weathering 90.93 TC 138/SC 5
ISO/TR 16913:1999
Plastics pipes and fittings -- Definitions of types of test 90.20 TC 138/SC 5
ISO 17454:2006
Plastics piping systems -- Multilayer pipes -- Test method for the adhesion of the different layers using a pulling rig 90.20 TC 138/SC 5
ISO 17455:2005
Plastics piping systems -- Multilayer pipes -- Determination of the oxygen permeability of the barrier pipe 90.60 TC 138/SC 5
ISO 17455:2005/Cor 1:2007
60.60 TC 138/SC 5
ISO 17456:2006
Plastics piping systems -- Multilayer pipes -- Determination of long-term strength 60.60 TC 138/SC 5
ISO 17484-1:2006
Plastics piping systems -- Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) -- Part 1: Specifications for systems 60.60 TC 138/SC 4
ISO 17484-1:2006/Cor 1:2008
60.60 TC 138/SC 4
ISO 17484-2:2009
Plastics piping systems -- Multilayer pipe systems for indoor gas installations -- Part 2: Code of pratice 60.60 TC 138/SC 4
ISO/TR 18124:2006
Plastics piping systems -- Multilayer M (metal) pipes -- Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone 60.60 TC 138/SC 5
ISO 18225:2007
Plastics piping systems -- Multilayer piping systems for outdoor gas installations -- Specifications for systems 60.60 TC 138/SC 4
ISO/TS 18226:2006
Plastics pipes and fittings -- Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar) 60.60 TC 138/SC 4
ISO 18373-1:2007
Rigid PVC pipes -- Differential scanning calorimetry (DSC) method -- Part 1: Measurement of the processing temperature 60.60 TC 138/SC 5
ISO 18373-2:2008
Rigid PVC pipes -- Differential scanning calorimetry (DSC) method -- Part 2: Measurement of the enthalpy of fusion of crystallites 60.60 TC 138/SC 5
ISO 18553:2002
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds 90.93 TC 138/SC 5
ISO 18553:2002/Amd 1:2007
60.60 TC 138/SC 5
ISO 18672-1
Plastics piping systems for non-pressure drainage and sewerage -- Polyester resin concrete (PRC) -- Part 1: Pipes and fittings with flexible joints 60.00 TC 138/SC 6
ISO 19220:2004
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Styrene copolymer blends (SAN + PVC) 90.93 TC 138/SC 1
ISO/TR 19480:2005
Polyethylene pipes and fittings for the supply of gaseous fuels or water -- Training and assessment of fusion operators 60.60 TC 138/SC 4
ISO 21003-2:2008
Multilayer piping systems for hot and cold water installations inside buildings -- Part 2: Pipes 60.60 TC 138/SC 2
ISO/TS 21003-7:2008
Multilayer piping systems for hot and cold water installations inside buildings -- Part 7: Guidance for the assessment of conformity 60.60 TC 138/SC 2
ISO 21004:2006
Plastics piping systems -- Multilayer pipes and their joints, based on thermoplastics, for water supply 60.60 TC 138/SC 2
ISO 21138-1:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 1: Material specifications and performance criteria for pipes, fittings and system 60.60 TC 138/SC 1
ISO 21138-2:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 2: Pipes and fittings with smooth external surface, Type A 60.60 TC 138/SC 1
ISO 21138-3:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 3: Pipes and fittings with non-smooth external surface, Type B 60.60 TC 138/SC 1
ISO 21307:2009
Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems 60.60 TC 138/SC 4
ISO/DIS 21751
Plastics pipes and fittings -- Determination of cohesive resistance -- Strip-bend test for electrofusion assemblies 40.20 TC 138/SC 5
ISO 22391-2:2007
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 2: Pipes 90.92 TC 138/SC 2
ISO/DIS 22391-2
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 2: Pipes 40.99 TC 138/SC 2
ISO/CD 23228
Thermoplastics pipes for the conveyance of fluids -- Determination of the stress-rupture resistance of pipe resin materials by the use of plain strain tensile (PSGT) specimens 30.60 TC 138/SC 5
ISO 24033:2009
Polyethylene of raised temperature resistance (PE-RT) pipes -- Effect of time and temperature on the expected strength 60.60 TC 138/SC 5
ISO/DIS 25780
Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Pipes with flexible joints intended to be installed using jacking techniques 40.00 TC 138/SC 6
ISO/CD TR 26873
Plastics pipes and fittings -- Definition and construction procedures for reference lines 30.60 TC 138/SC 5
ISO/CD 29561-1
Plastics piping systems -- Glass fibre reinforced polyethylene (PE-GF) piping systems for water supply -- Part 1: General 30.20 TC 138/SC 2
ISO/CD 29561-2
Plastics piping systems -- Glass fibre reinforced polyethylene (PE-GF) piping systems for water supply -- Part 2: Pipes 30.20 TC 138/SC 2

23.040.40 Metal fittings
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 49:1994
Malleable cast iron fittings threaded to ISO 7-1 90.93 TC 5/SC 5
ISO 49:1994/Cor 1:1997
60.60 TC 5/SC 5
ISO 2016:1981
Capillary solder fittings for copper tubes -- Assembly dimensions and tests 90.93 TC 5/SC 5
ISO 3419:1981
Non-alloy and alloy steel butt-welding fittings 90.92 TC 5/SC 5
ISO 3545-3:1989
Steel tubes and fittings -- Symbols for use in specifications -- Part 3: Tubular fittings with circular cross-section 90.93 TC 5/SC 1
ISO 4144:2003
Pipework -- Stainless steel fittings threaded in accordance with ISO 7-1 90.93 TC 5/SC 5
ISO 4145:1986
Non-alloy steel fittings threaded to ISO 7-1 90.93 TC 5/SC 5
ISO 5251:1981
Stainless steel butt-welding fittings 90.93 TC 5/SC 5
ISO 5256:1985
Steel pipes and fittings for buried or submerged pipe lines -- External and internal coating by bitumen or coal tar derived materials 90.93 TC 5/SC 1
ISO 6761:1981
Steel tubes -- Preparation of ends of tubes and fittings for welding 90.93 TC 5/SC 1

23.040.45 Plastics fittings
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 264:1976
Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure -- Laying lengths -- Metric series 90.93 TC 138/SC 2
ISO 264:1976/Add 1:1982
Diameters 200 mm and 225 mm 60.60 TC 138/SC 2
ISO 265-1:1988
Pipes and fittings of plastics materials -- Fittings for domestic and industrial waste pipes -- Basic dimensions: Metric series -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U) 90.93 TC 138/SC 1
ISO 580:2005
Plastics piping and ducting systems -- Injection-moulded thermoplastics fittings -- Methods for visually assessing the effects of heating 90.93 TC 138/SC 5
ISO 727-1:2002
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure -- Part 1: Metric series 90.93 TC 138/SC 2
ISO 727-2:2005
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure -- Part 2: Inch-based series 90.93 TC 138/SC 2
ISO 1167-1:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 1: General method 90.20 TC 138/SC 5
ISO 1167-2:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 2: Preparation of pipe test pieces 90.20 TC 138/SC 5
ISO 1167-3:2007
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 3: Preparation of components 60.60 TC 138/SC 5
ISO 1167-4:2007
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 4: Preparation of assemblies 60.60 TC 138/SC 5
ISO/FDIS 1452-1
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 1: General 50.00 TC 138/SC 2
ISO/FDIS 1452-2
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 2: Pipes 50.00 TC 138/SC 2
ISO/FDIS 1452-3
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 3: Fittings 50.00 TC 138/SC 2
ISO/FDIS 1452-4
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 4: Valves 50.00 TC 138/SC 2
ISO/FDIS 1452-5
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 5: Fitness for purpose of the system 50.00 TC 138/SC 2
ISO 2045:1988
Single sockets for unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) pressure pipes with elastic sealing ring type joints -- Minimum depths of engagement 90.93 TC 138/SC 2
ISO 2048:1990
Double-socket fittings for unplasticized poly(vinyl chloride) (PVC-U) pressure pipes with elastic sealing ring type joints -- Minimum depths of engagement 90.93 TC 138/SC 2
ISO 2507-1:1995
Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 1: General test method 90.93 TC 138/SC 5
ISO 2507-2:1995
Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes 90.93 TC 138/SC 5
ISO 2507-3:1995
Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings 90.93 TC 138/SC 5
ISO 3514:1976
Chlorinated polyvinyl chloride (CPVC) pipes and fittings -- Specification and determination of density 90.93 TC 138/SC 5
ISO 3603:1977
Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints -- Pressure test for leakproofness 90.93 TC 138/SC 2
ISO 4132:1979
Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure -- Laying lengths and size of threads -- Metric series 90.93 TC 138/SC 2
ISO 4422-1:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 1: General 90.92 TC 138/SC 2
ISO 4422-2:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 2: Pipes (with or without integral sockets) 90.92 TC 138/SC 2
ISO 4422-3:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 3: Fittings and joints 90.92 TC 138/SC 2
ISO 4422-4:1997
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 4: Valves and ancillary equipment 90.92 TC 138/SC 2
ISO 4422-5:1997
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 5: Fitness for purpose of the system 90.92 TC 138/SC 2
ISO 4427-1:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 1: General 60.60 TC 138/SC 2
ISO 4427-1:2007/Cor 1:2008
60.60 TC 138/SC 2
ISO 4427-3:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 3: Fittings 60.60 TC 138/SC 2
ISO 4427-5:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 5: Fitness for purpose of the system 60.60 TC 138/SC 2
ISO 4434:1977
Unplasticized polyvinyl chloride (PVC) adaptor fittings for pipes under pressure -- Laying length and size of threads -- Metric series 90.93 TC 138/SC 2
ISO 4439:1979
Unplasticized polyvinyl chloride (PVC) pipes and fittings -- Determination and specification of density 90.93 TC 138/SC 5
ISO 6455:1983
Unplasticized polyvinyl chloride (PVC) fittings with elastic sealing ring type joints for pipes under pressure -- Dimensions of laying lengths -- Metric series 90.93 TC 138/SC 2
ISO 7245:1984
Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) -- General specification for moulding and extrusion materials 90.93 TC 138/SC 5
ISO 7246:1984
Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) -- General specification for moulding and extrusion materials 90.93 TC 138/SC 5
ISO 7279:1984
Polypropylene (PP) fittings for pipes under pressure -- Sockets for fusion using heated tools -- Metric series -- Dimensions of sockets 90.93 TC 138/SC 2
ISO 7432:2002
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals 90.93 TC 138/SC 6
ISO 7510:1997
Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method 90.93 TC 138/SC 6
ISO 7511:1999
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the leaktightness of the wall under short-term internal pressure 90.93 TC 138/SC 6
ISO 7686:2005
Plastics pipes and fittings -- Determination of opacity 90.93 TC 138/SC 5
ISO 8283-1:1991
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) 90.93 TC 138/SC 1
ISO 8283-2:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 2: Polyethylene (PE) 90.93 TC 138/SC 1
ISO 8283-3:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 3: Polypropylene (PP) 90.93 TC 138/SC 1
ISO 8283-4:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 4: Acrylonitrile/butadiene/styrene (ABS) 90.93 TC 138/SC 1
ISO 8361-1:1991
Thermoplastics pipes and fittings -- Water absorption -- Part 1: General test method 90.93 TC 138/SC 5
ISO 8361-2:1991
Thermoplastics pipes and fittings -- Water absorption -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings 90.60 TC 138/SC 5
ISO 8361-3:1991
Thermoplastics pipes and fittings -- Water absorption -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings 90.93 TC 138/SC 5
ISO 8483:2003
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of bolted flange joints 90.60 TC 138/SC 6
ISO 8533:2003
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of cemented or wrapped joints 90.60 TC 138/SC 6
ISO 8772:2006
Plastics piping systems for non-pressure underground drainage and sewerage -- Polyethylene (PE) 60.60 TC 138/SC 1
ISO 8773:2006
Plastics piping systems for non-pressure underground drainage and sewerage -- Polypropylene (PP) 60.60 TC 138/SC 1
ISO 9623:1997
PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure -- Design lengths and size of threads -- Metric series 90.93 TC 138/SC 2
ISO 9625:1993
Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes 95.20 TC 138/SC 2
ISO 9853:1991
Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems -- Crushing test 90.93 TC 138/SC 5
ISO 10147:2004
Pipes and fittings made of crosslinked polyethylene (PE-X) -- Estimation of the degree of crosslinking by determination of the gel content 90.93 TC 138/SC 5
ISO 10147:2004/Amd 1:2008
60.60 TC 138/SC 5
ISO/TR 10358:1993
Plastics pipes and fittings -- Combined chemical-resistance classification table 90.93 TC 138/SC 3
ISO 10508:2006
Plastics piping systems for hot and cold water installations -- Guidance for classification and design 90.20 TC 138/SC 2
ISO 10928:1997
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use 90.92 TC 138/SC 6
ISO/FDIS 10928
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use 50.00 TC 138/SC 6
ISO 10952:2008
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack for the inside of a section in a deflected condition 60.60 TC 138/SC 6
ISO/CD 10986
Plasitcs piping systems for pressure and non-pressure applications -- Installation of pipes above ground -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin 30.60 TC 138/SC 6
ISO/FDIS 11296-1
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 1: General 50.00 TC 138
ISO/FDIS 11296-3
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 3: Lining with close-fit pipes 50.00 TC 138
ISO/FDIS 11296-4
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 4: Lining with cured-in-places pipes 50.00 TC 138
ISO/DIS 11298-1
Plastics piping systems for renovation of underground water supply networks -- Part 1: General 40.99 TC 138
ISO/DIS 11298-3
Plastics piping systems for renovation of underground water supply networks -- Part 3: Lining with close-fit-pipes 40.99 TC 138
ISO/NP 11299-1
Plastics piping systems for renovation of underground gas supply networks -- Part 1: General 10.99 TC 138
ISO/NP 11299-3
Plastics piping systems for renovation of underground gas supply networks -- Part 3: Limning with close-fit pipes 10.99 TC 138
ISO 12162:1995
Thermoplastics materials for pipes and fittings for pressure applications -- Classification and designation -- Overall service (design) coefficient 90.92 TC 138/SC 5
ISO/FDIS 12162
Thermoplastics materials for pipes and fittings for pressure applications -- Classification, design coefficient, and designation 50.00 TC 138/SC 5
ISO 12176-1:2006
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 1: Butt fusion 60.60 TC 138/SC 4
ISO 12176-2:2008
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 2: Electrofusion 60.60 TC 138/SC 4
ISO 12176-3:2006
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 3: Operator's badge 90.20 TC 138/SC 4
ISO 12176-4:2003
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 4: Traceability coding 90.60 TC 138/SC 4
ISO/NP 13147
Plastics pipes and fittings ? Slow peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 50 mm 10.99 TC 138/SC 5
ISO/DIS 13260
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Test method for resistance to combined temperature cycling and external loading 40.20 TC 138/SC 1
ISO/DIS 13262
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics spirally-formed structured-wall pipes -- Determination of the tensile strength of a seam 40.20 TC 138/SC 1
ISO/DIS 13263
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for impact strength 40.20 TC 138/SC 1
ISO/DIS 13264
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for mechanical strength or flexibility of fabricated fittings 40.20 TC 138/SC 1
ISO/DIS 13265
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Joints for buried non-pressure applications -- Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure 40.20 TC 138/SC 1
ISO/DIS 13266
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of resistance against surface and traffic loading 40.20 TC 138/SC 1
ISO/DIS 13267
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics inspection chamber and manhole bases -- Test method for buckling resistance 40.20 TC 138/SC 1
ISO/DIS 13268
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of ring stiffness 40.20 TC 138/SC 1
ISO/DIS 13272
Plastics piping systems for non-pressure underground drainage and sewerage -- Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) -- Specifications for manholes and inspection chambers in traffic areas and underground installations 40.20 TC 138/SC 1
ISO 13761:1996
Plastics pipes and fittings -- Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C 90.93 TC 138/SC 5
ISO 13924:2000
Plastics pipes and fittings -- Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles 90.93 TC 138/SC 5
ISO 13950:2007
Plastics pipes and fittings -- Automatic recognition systems for electrofusion joints 60.60 TC 138/SC 4
ISO 13950:2007/Cor 1:2008
60.60 TC 138/SC 4
ISO 13957:1997
Plastics pipes and fittings -- Polyethylene (PE) tapping tees -- Test method for impact resistance 90.93 TC 138/SC 5
ISO 13966:1998
Thermoplastics pipes and fittings -- Nominal ring stiffnesses 90.93 TC 138
ISO 13967:1998
Thermoplastics fittings -- Determination of ring stiffness 90.92 TC 138/SC 5
ISO/DIS 13967
Thermoplastics fittings -- Determination of ring stiffness 40.99 TC 138/SC 5
ISO 14236:2000
Plastics pipes and fittings -- Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems 90.93 TC 138/SC 2
ISO 14531-1:2002
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 1: Pipes 90.93 TC 138/SC 4
ISO 14531-2:2004
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 2: Fittings for heat-fusion jointing 90.93 TC 138/SC 4
ISO 14531-3:2006
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 3: Fittings for mechanical jointing (including PE-X/metal transitions) 90.20 TC 138/SC 4
ISO 14531-4:2006
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 4: System design and installation guidelines 90.20 TC 138/SC 4
ISO 15306:2003
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the resistance to cyclic internal pressure 90.93 TC 138/SC 6
ISO 15439-1:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) -- Polyamide (PA) -- Part 1: General 60.60 TC 138/SC 4
ISO 15439-2:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) -- Polyamide (PA) -- Part 2: Pipes 60.60 TC 138/SC 4
ISO 15439-3:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) -- Polyamide (PA) -- Part 3: Fittings 60.60 TC 138/SC 4
ISO 15874-3:2003
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 3: Fittings 90.92 TC 138/SC 2
ISO/NP 15874-3
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 3: Fittings 10.99 TC 138/SC 2
ISO 15874-3:2003/FDAmd 1
50.20 TC 138/SC 2
ISO 15875-3:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 3: Fittings 90.93 TC 138/SC 2
ISO 15876-3:2003
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 3: Fittings 90.93 TC 138/SC 2
ISO 15877-3:2009
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 3: Fittings 60.60 TC 138/SC 2
ISO 15877-3:2009/CD Amd 1
30.99 TC 138/SC 2
ISO 16241:2005
Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT) 90.93 TC 138/SC 5
ISO 16422:2006
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure -- Specifications 90.20 TC 138/SC 2
ISO 16871:2003
Plastics piping and ducting systems -- Plastics pipes and fittings -- Method for exposure to direct (natural) weathering 90.93 TC 138/SC 5
ISO/TR 16913:1999
Plastics pipes and fittings -- Definitions of types of test 90.20 TC 138/SC 5
ISO 17484-1:2006
Plastics piping systems -- Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) -- Part 1: Specifications for systems 60.60 TC 138/SC 4
ISO 17484-1:2006/Cor 1:2008
60.60 TC 138/SC 4
ISO 17484-2:2009
Plastics piping systems -- Multilayer pipe systems for indoor gas installations -- Part 2: Code of pratice 60.60 TC 138/SC 4
ISO 18225:2007
Plastics piping systems -- Multilayer piping systems for outdoor gas installations -- Specifications for systems 60.60 TC 138/SC 4
ISO/TS 18226:2006
Plastics pipes and fittings -- Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar) 60.60 TC 138/SC 4
ISO 18553:2002
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds 90.93 TC 138/SC 5
ISO 18553:2002/Amd 1:2007
60.60 TC 138/SC 5
ISO 18672-1
Plastics piping systems for non-pressure drainage and sewerage -- Polyester resin concrete (PRC) -- Part 1: Pipes and fittings with flexible joints 60.00 TC 138/SC 6
ISO/TR 19480:2005
Polyethylene pipes and fittings for the supply of gaseous fuels or water -- Training and assessment of fusion operators 60.60 TC 138/SC 4
ISO/CD TS 19911
Plastics pipes and fittings -- Format for a technical file for characterizing PE spigot end fittings 30.99 TC 138/SC 5
ISO 21003-3:2008
Multilayer piping systems for hot and cold water installations inside buildings -- Part 3: Fittings 60.60 TC 138/SC 2
ISO 21004:2006
Plastics piping systems -- Multilayer pipes and their joints, based on thermoplastics, for water supply 60.60 TC 138/SC 2
ISO 21138-1:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 1: Material specifications and performance criteria for pipes, fittings and system 60.60 TC 138/SC 1
ISO 21138-2:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 2: Pipes and fittings with smooth external surface, Type A 60.60 TC 138/SC 1
ISO 21138-3:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 3: Pipes and fittings with non-smooth external surface, Type B 60.60 TC 138/SC 1
ISO 21307:2009
Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems 60.60 TC 138/SC 4
ISO/DIS 21751
Plastics pipes and fittings -- Determination of cohesive resistance -- Strip-bend test for electrofusion assemblies 40.20 TC 138/SC 5
ISO 22391-3:2007
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 3: Fittings 90.92 TC 138/SC 2
ISO/DIS 22391-3
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 3: Fittings 40.99 TC 138/SC 2
ISO/CD TR 26873
Plastics pipes and fittings -- Definition and construction procedures for reference lines 30.60 TC 138/SC 5
ISO/CD 29561-1
Plastics piping systems -- Glass fibre reinforced polyethylene (PE-GF) piping systems for water supply -- Part 1: General 30.20 TC 138/SC 2

23.040.50 Pipes and fittings of other materials
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 3586:1976
Glass plant, pipeline and fittings -- General rules for testing, handling and use 95.20 TC 128
ISO 3587:1976
Glass plant, pipeline and fittings -- Pipeline and fittings of nominal bore 15 to 150 mm -- Compatibility and interchangeability 95.20 TC 128
ISO 4704:1977
Glass plant, pipeline and fittings -- Glass plant components 95.20 TC 128

23.040.60 Flanges, couplings and joints
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 2536:1974
Unplasticized polyvinyl chloride (PVC) pressure pipes and fittings, metric series -- Dimensions of flanges 95.20 TC 138/SC 2
ISO 3458:1976
Assembled joints between fittings and polyethylene (PE) pressure pipes -- Test of leakproofness under internal pressure 90.93 TC 138/SC 2
ISO 3459:1976
Polyethylene (PE) pressure pipes -- Joints assembled with mechanical fittings -- Internal under-pressure test method and requirement 90.93 TC 138/SC 2
ISO 3460:1975
Unplasticized polyvinyl chloride (PVC) pressures pipes -- Metric series -- Dimensions of adapter for backing flange 90.93 TC 138/SC 2
ISO 3501:1976
Assembled joints between fittings and polyethylene (PE) pressure pipes -- Test of resistance to pull out 90.93 TC 138/SC 2
ISO 3503:1976
Assembled joints between fittings and polyethylene (PE) pressure pipes -- Test of leakproofness under internal pressure when subjected to bending 90.93 TC 138/SC 2
ISO 7005-1:1992
Metallic flanges -- Part 1: Steel flanges 90.92 TC 5/SC 10
ISO/FDIS 7005-1
Pipe flanges -- Part 1: Steel flanges for industrial and general service piping systems 50.92 TC 5/SC 10
ISO 7005-2:1988
Metallic flanges -- Part 2: Cast iron flanges 90.92 TC 5/SC 10
ISO 7005-3:1988
Metallic flanges -- Part 3: Copper alloy and composite flanges 90.92 TC 5/SC 10
ISO 8639:2000
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods for leaktightness of flexible joints 90.93 TC 138/SC 6
ISO/FDIS 9624
Thermoplastics pipes for fluids under pressure -- Mating dimensions of flange adapters and loose backing flanges 50.00 TC 138/SC 2
ISO 9624:1997
Thermoplastics pipes for fluids under pressure -- Mating dimensions of flange adapters and loose backing flanges 90.92 TC 138/SC 2
ISO 11413:2008
Plastics pipes and fittings -- Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting 60.60 TC 138/SC 5
ISO 11414:2009
Plastics pipes and fittings -- Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion 60.60 TC 138/SC 5
ISO 13783:1997
Plastics piping systems -- Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints -- Test method for leaktightness and strength while subjected to bending and internal pressure 90.93 TC 138/SC 2
ISO 13846:2000
Plastics piping systems -- End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping -- Test method for long-term leaktightness under internal water pressure 90.93 TC 138/SC 2
ISO 13953:2001
Polyethylene (PE) pipes and fittings -- Determination of the tensile strength and failure mode of test pieces from a butt-fused joint 90.93 TC 138/SC 5
ISO 13954:1997
Plastics pipes and fittings -- Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm 90.93 TC 138/SC 5
ISO 13955:1997
Plastics pipes and fittings -- Crushing decohesion test for polyethylene (PE) electrofusion assemblies 90.93 TC 138/SC 5
ISO/CD 13956
Plastics pipes and fittings -- Determination of cohesive resistance -- Tear test for polyethylene (PE) saddle assemblies 30.99 TC 138/SC 5
ISO 19879:2005
Metallic tube connections for fluid power and general use -- Test methods for hydraulic fluid power connections 90.60 TC 131/SC 4
ISO 19879:2005/Cor 1:2007
60.60 TC 131/SC 4
ISO/DIS 19899.2
Plastics piping systems -- Polyolefin pipes and mechanical fitting assemblies -- Test method for the resistance to end load (AREL test) 40.60 TC 138/SC 5
ISO/CD TS 19911
Plastics pipes and fittings -- Format for a technical file for characterizing PE spigot end fittings 30.99 TC 138/SC 5
ISO/AWI 27509
Petroleum and natural gas industries -- Compact flanged connections 20.00 TC 67/SC 6

23.040.70 Hoses and hose assemblies
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 1307:2006
Rubber and plastics hoses -- Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses 90.20 TC 45/SC 1
ISO 1402:1994
Rubber and plastics hoses and hose assemblies -- Hydrostatic testing 90.92 TC 45/SC 1
ISO/FDIS 1402
Rubber and plastics hoses and hose assemblies -- Hydrostatic testing 50.00 TC 45/SC 1
ISO 1403:2005
Rubber hoses, textile-reinforced, for general-purpose water applications -- Specification 90.93 TC 45/SC 1
ISO 1746:1998
Rubber or plastics hoses and tubing -- Bending tests 90.93 TC 45/SC 1
ISO 1746:1998/Cor 1:1999
60.60 TC 45/SC 1
ISO 2398:2006
Rubber hoses, textile-reinforced, for compressed air -- Specification 90.20 TC 45/SC 1
ISO 3994:2007
Plastics hoses -- Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials -- Specification 60.60 TC 45/SC 1
ISO 4023:1991
Rubber hoses for steam -- Test methods 90.92 TC 45/SC 1
ISO/FDIS 4023
Rubber hoses and hose assemblies for steam -- Test methods 50.00 TC 45/SC 1
ISO 4080:1991
Rubber and plastics hoses and hose assemblies -- Determination of permeability to gas 90.92 TC 45/SC 1
ISO/FDIS 4080
Rubber and plastics hoses and hose assemblies -- Determination of permeability to gas 50.00 TC 45/SC 1
ISO 4080:1991/Cor 2:1998
60.60 TC 45/SC 1
ISO/DIS 4641
Rubber hoses and hose assemblies for water suction and discharge -- Specification 40.20 TC 45/SC 1
ISO 4641:2005
Rubber hoses and hose assemblies for water suction and discharge -- Specification 90.92 TC 45/SC 1
ISO 4671:2007
Rubber and plastics hoses and hose assemblies -- Methods of measurement of the dimensions of hoses and the lengths of hose assemblies 60.60 TC 45/SC 1
ISO 4672:1997
Rubber and plastics hoses -- Sub-ambient temperature flexibility tests 90.92 TC 45/SC 1
ISO 5774:2006
Plastics hoses -- Textile-reinforced types for compressed-air applications -- Specification 90.20 TC 45/SC 1
ISO 6134:2005
Rubber hoses and hose assemblies for saturated steam -- Specification 90.93 TC 45/SC 1
ISO 6224:2005
Thermoplastics hoses, textile-reinforced, for general-purpose water applications -- Specification 90.92 TC 45/SC 1
ISO/DIS 6224
Thermoplastics hoses, textile-reinforced, for general-purpose water applications -- Specification 40.20 TC 45/SC 1
ISO 6801:1983
Rubber or plastics hoses -- Determination of volumetric expansion 90.20 TC 45/SC 1
ISO 6802:2005
Rubber and plastics hoses and hose assemblies with wire reinforcements -- Hydraulic impulse test with flexing 90.93 TC 45/SC 1
ISO 6803:2008
Rubber or plastics hoses and hose assemblies -- Hydraulic-pressure impulse test without flexing 60.60 TC 45/SC 1
ISO 6945:1991
Rubber hoses -- Determination of abrasion resistance of the outer cover 90.93 TC 45/SC 1
ISO 6945:1991/Amd 1:1998
90.93 TC 45/SC 1
ISO 7233:2006
Rubber and plastics hoses and hose assemblies -- Determination of resistance to vacuum 90.20 TC 45/SC 1
ISO 7326:2006
Rubber and plastics hoses -- Assessment of ozone resistance under static conditions 90.20 TC 45/SC 1
ISO 7369:2004
Pipework -- Metal hoses and hose assemblies -- Vocabulary 90.93 TC 5/SC 11
ISO 7662:1988
Rubber and plastics hoses -- Determination of abrasion of lining 90.20 TC 45/SC 1
ISO 7751:1991
Rubber and plastics hoses and hose assemblies -- Ratios of proof and burst pressure to design working pressure 90.20 TC 45/SC 1
ISO 8029:2007
Plastics hose -- General-purpose collapsible water hose, textile-reinforced -- Specification 60.60 TC 45/SC 1
ISO 8030:1995
Rubber and plastics hoses -- Method of test for flammability 90.93 TC 45/SC 1
ISO 8031:1993
Rubber and plastics hoses and hose assemblies -- Determination of electrical resistance 90.92 TC 45/SC 1
ISO/FDIS 8031
Rubber and plastics hoses and hose assemblies -- Determination of electrical resistance and conductivity 50.00 TC 45/SC 1
ISO 8032:1997
Rubber and plastics hose assemblies -- Flexing combined with hydraulic impulse test (half-omega test) 90.93 TC 45/SC 1
ISO 8033:2006
Rubber and plastics hoses -- Determination of adhesion between components 90.20 TC 45/SC 1
ISO 8308:2006
Rubber and plastics hoses and tubing -- Determination of transmission of liquids through hose and tubing walls 90.20 TC 45/SC 1
ISO 8330:2007
Rubber and plastics hoses and hose assemblies -- Vocabulary 60.60 TC 45/SC 1
ISO 8331:2007
Rubber and plastics hoses and hose assemblies -- Guidelines for selection, storage, use and maintenance 60.60 TC 45/SC 1
ISO 8580:1987
Rubber and plastics hoses -- Determination of ultra-violet resistance under static conditions 90.92 TC 45/SC 1
ISO 10380:2003
Pipework -- Corrugated metal hoses and hose assemblies 90.92 TC 5/SC 11
ISO/NP 10380
Pipework -- Corrugated metal hoses and hose assemblies 10.99 TC 5/SC 11
ISO/DIS 10619-1
Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 1: Bending tests at ambient temperature 40.20 TC 45/SC 1
ISO/DIS 10619-2
Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 2: Bending tests at sub-ambient temperatures 40.20 TC 45/SC 1
ISO/DIS 10619-3
Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 3: Bending tests at high and low temperatures 40.20 TC 45/SC 1
ISO 10806:2003
Pipework -- Fittings for corrugated metal hoses 90.93 TC 5/SC 11
ISO 10960:1994
Rubber and plastics hoses -- Assessment of ozone resistance under dynamic conditions 90.93 TC 45/SC 1
ISO 11758:1995
Rubber and plastics hoses -- Exposure to a xenon arc lamp -- Determination of changes in colour and appearance 90.92 TC 45/SC 1
ISO 11758:1995/Cor 1:1998
60.60 TC 45/SC 1
ISO 12151-1:1999
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends 90.92 TC 131/SC 4
ISO/DIS 12151-1
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends 40.60 TC 131/SC 4
ISO 12151-2:2003
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings 90.60 TC 131/SC 4
ISO 12151-3:1999
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 3: Hose fittings with ISO 6162 flange ends 90.92 TC 131/SC 4
ISO/DIS 12151-3
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends 40.60 TC 131/SC 4
ISO 12151-4:2007
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 4: Hose fittings with ISO 6149 metric stud ends 60.60 TC 131/SC 4
ISO 12151-5:2007
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 5: Hose fittings with ISO 8434-2 37 degree flared ends 60.60 TC 131/SC 4
ISO/FDIS 12151-6
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 6: Hose fittings with ISO 8434-6 60 degree cone ends 50.20 TC 131/SC 4
ISO 15348:2002
Pipework -- Metal bellows expansion joints -- General 90.60 TC 5/SC 11
ISO 15465:2004
Pipework -- Stripwound metal hoses and hose assemblies 90.93 TC 5/SC 11
ISO 17165-1:2007
Hydraulic fluid power -- Hose assemblies -- Part 1: Dimensions and requirements 60.60 TC 131/SC 4
ISO/TR 17165-2:2006
Hydraulic fluid power -- Hose assemblies -- Part 2: Recommended practices for hydraulic hose assemblies 60.60 TC 131/SC 4
ISO/TR 17784:2003
Rubber and plastics hoses and hose assemblies -- Guide for use by purchasers, assemblers, installers and operating personnel 90.93 TC 45/SC 1
ISO/AWI 18409
Hydraulic fluid power -- Hose and hose assemblies -- Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly 20.00 TC 131/SC 4
ISO 18752:2006
Rubber hoses and hose assemblies -- Wire- or textile-reinforced single-pressure types for hydraulic applications -- Specification 90.20 TC 45/SC 1
ISO 28702:2008
Rubber and plastics hoses and tubing -- Textile-reinforced types -- Sub-ambient temperature crush test 60.60 TC 45/SC 1
ISO/DIS 30013
Rubber and plastics hoses -- Methods of exposure to laboratory light sources -- Determination of changes in colour, appearance and other physical properties 40.20 TC 45/SC 1

23.040.80 Seals for pipe and hose assemblies
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 7483:1991
Dimensions of gaskets for use with flanges to ISO 7005 90.93 TC 5/SC 10
ISO 7483:1991/Cor 1:1995
60.60 TC 5/SC 10
ISO 9691:1992
Rubber -- Recommendations for the workmanship of pipe joint rings -- Description and classification of imperfections 90.93 TC 45/SC 4


23.040.99 Other pipeline components

23.060 Valves
ICS Field
23.060.01 Valves in general
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 5208:2008
Industrial valves -- Pressure testing of metallic valves 90.92 TC 153/SC 1
ISO 5209:1977
General purpose industrial valves -- Marking 90.93 TC 153/SC 1
ISO 5210:1991
Industrial valves -- Multi-turn valve actuator attachments 90.60 TC 153/SC 2
ISO 5211:2001
Industrial valves -- Part-turn actuator attachments 90.60 TC 153/SC 2
ISO 5752:1982
Metal valves for use in flanged pipe systems -- Face-to-face and centre-to-face dimensions 90.93 TC 153/SC 1
ISO 6552:1980
Automatic steam traps -- Definition of technical terms 90.93 TC 153
ISO 6552:1980/CD Cor 1
30.99 TC 153
ISO 6553:1980
Automatic steam traps -- Marking 90.93 TC 153
ISO 6554:1980
Flanged automatic steam traps -- Face-to-face dimensions 90.93 TC 153
ISO 6704:1982
Automatic steam traps -- Classification 90.93 TC 153
ISO 6948:1981
Automatic steam traps -- Production and performance characteristic tests 90.93 TC 153
ISO 7841:1988
Automatic steam traps -- Determination of steam loss -- Test methods 90.93 TC 153
ISO 7842:1988
Automatic steam traps -- Determination of discharge capacity -- Test methods 90.93 TC 153
ISO 8233:1988
Thermoplastics valves -- Torque -- Test method 90.93 TC 138/SC 7
ISO 8659:1989
Thermoplastics valves -- Fatigue strength -- Test method 90.93 TC 138/SC 7
ISO 9393-1:2004
Thermoplastics valves for industrial applications -- Pressure test methods and requirements -- Part 1: General 90.93 TC 138/SC 7
ISO 9393-2:2005
Thermoplastics valves for industrial applications -- Pressure test methods and requirements -- Part 2: Test conditions and basic requirements 90.93 TC 138/SC 7
ISO 10497:2004
Testing of valves -- Fire type-testing requirements 90.92 TC 153/SC 1
ISO/DIS 10497
Testing of valves -- Fire type-testing requirements 40.60 TC 153/SC 1
ISO 14617-8:2002
Graphical symbols for diagrams -- Part 8: Valves and dampers 90.60 TC 10/SC 10
ISO 15848-1:2006
Industrial valves -- Measurement, test and qualification procedures for fugitive emissions -- Part 1: Classification system and qualification procedures for type testing of valves 90.60 TC 153/SC 1
ISO 15848-2:2006
Industrial valves -- Measurement, test and qualification procedures for fugitive emissions -- Part 2: Production acceptance test of valves 90.60 TC 153/SC 1
ISO 22434:2006
Transportable gas cylinders -- Inspection and maintenance of cylinder valves 60.60 TC 58/SC 2

23.060.10 Globe valves
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 12149:1999
Bolted bonnet steel globe valves for general-purpose applications 90.60 TC 153/SC 1
ISO 21787:2006
Industrial valves -- Globe valves of thermoplastics materials 90.20 TC 138/SC 7

23.060.20 Ball and plug valves
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 7121:2006
Steel ball valves for general-purpose industrial applications 90.93 TC 153/SC 1
ISO 16135:2006
Industrial valves -- Ball valves of thermoplastics materials 90.20 TC 138/SC 7
ISO 17292:2004
Metal ball valves for petroleum, petrochemical and allied industries 90.93 TC 153/SC 1

23.060.30 Gate valves
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 5996:1984
Cast iron gate valves 90.60 TC 153/SC 1
ISO 6002:1992
Bolted bonnet steel gate valves 90.93 TC 153/SC 1
ISO 7259:1988
Predominantly key-operated cast iron gate valves for underground use 90.60 TC 153/SC 1
ISO 16139:2006
Industrial valves -- Gate valves of thermoplastics materials 90.20 TC 138/SC 7

23.060.40 Pressure regulators
Including pressure-reducers
Protection against excessive pressure, see 13.240
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 10297:2006
Transportable gas cylinders -- Cylinder valves -- Specification and type testing 90.92 TC 58/SC 2
ISO/DIS 28622
Pressure relief valves for transportable refillable cylinders for liquefied petroleum gas (LPG) 40.60 TC 58/SC 2

23.060.50 Check valves
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 16137:2006
Industrial valves -- Check valves of thermoplastics materials 90.20 TC 138/SC 7

23.060.99 Other valves
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 10631:1994
Metallic butterfly valves for general purposes 90.60 TC 153/SC 1
ISO 16136:2006
Industrial valves -- Butterfly valves of thermoplastics materials 90.20 TC 138/SC 7
ISO 16138:2006
Industrial valves -- Diaphragm valves of thermoplastics materials 90.20 TC 138/SC 7


23.080 Pumps
Pumps for fluid power systems, see 23.100.10
Vacuum pumps, see 23.160
23.100 Fluid power systems
23.120 Ventilators. Fans. Air-conditioners
Marine ventilation and air-conditioning systems, see 47.020.90
Mining ventilation and air-conditioning systems, see 73.100.20
Ventilation and air-conditioning in buildings, see 91.140.30
23.140 Compressors and pneumatic machines
Compressed air, see 71.100.20
23.160 Vacuum technology
Including vacuum pumps


Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment